Skip to main content
SpringerLink
Log in

Filament Winding Process for Kenaf Fibre Reinforced Polymer Composites

  • Chapter
Book cover Manufacturing of Natural Fibre Reinforced Polymer Composites

Abstract

In this chapter, a study on filament winding process for kenaf fibre reinforced polymer composite manufacture is presented. Filament winding process for conventional fibre composites is discussed. Advantages and disadvantages of filament winding process are also briefly covered. A review on filament winding from various research is also performed. Brief review of filament winding of natural fibre composites is provided. The chapter also describes work on improvement of existing filament winding process and fabrication of hollow shaft made from kenaf fibre reinforced composites. The main contribution was the use of drum-type resin bath and surfacing veil, and these had facilitated ease of fabrication of kenaf yarn fibre reinforced unsaturated polyester composite hollow shafts.

This is a preview of subscription content, log in via an institution to check access.

Access this chapter

Log in via an institution
Chapter
USD 29.95
Price excludes VAT (USA)
  • Available as PDF
  • Read on any device
  • Instant download
  • Own it forever
eBook
USD 129.00
Price excludes VAT (USA)
  • Available as EPUB and PDF
  • Read on any device
  • Instant download
  • Own it forever
Softcover Book
USD 169.99
Price excludes VAT (USA)
  • Compact, lightweight edition
  • Dispatched in 3 to 5 business days
  • Free shipping worldwide - see info
Hardcover Book
USD 169.99
Price excludes VAT (USA)
  • Durable hardcover edition
  • Dispatched in 3 to 5 business days
  • Free shipping worldwide - see info

Tax calculation will be finalised at checkout

Purchases are for personal use only

Institutional subscriptions

References

  • Abdalla FH, Mutasher SA, Khalid YA, Sapuan SM, Hamouda AMS, Sahari BB, Hamdan MM (2007) Design and fabrication of low cost filament winding machine. Mater Des 28:234–239

    Article  Google Scholar 

  • Akkus N, Genc G, Girgin C (2008) Control of the pretension in filament winding process. Acta Mech Autom 2:5–10

    Google Scholar 

  • Anon (2011) Overview of ATL/AFP, filament winding, Composite World. (Online), Gardner Publications, Inc, http://www.compositesworld.com/zones/atl-afp-filamentwinding

  • Anwar UMK, Paridah MT, Hamdan H, Sapuan SM, Bakar SE (2009) Effect of pressing time on physical and mechanical properties of bamboo strip fibre reinforced phenolic composites. Ind Crop Prod 29:214–219

    Article  CAS  Google Scholar 

  • Buragohain M, Velmurugan R (2011) Study of filament wound grid-stiffened composite cylindrical structures. Compos Struct 93:1031–1038

    Article  Google Scholar 

  • Chen W, Yu Y, Li P, Wang C (2007) Science and effect of new epoxy matrix for T800 carbon fiber/epoxy filament wound composites. Compos Sci Technol 67:2261–2270

    Article  CAS  Google Scholar 

  • Davoodi MM, Sapuan SM, Yunus R (2008) Conceptual design of a polymer composite automotive bumper energy absorber. Mater Des 29:1447–1452

    Article  CAS  Google Scholar 

  • Davoodi MM, Sapuan SM, Ahmad D, Aidy A, Khalina A, Jonoobi M (2011) Concept selection of car bumper beam with developed hybrid bio-composite material. Mater Des 32:4857–4865

    Article  CAS  Google Scholar 

  • El-Shekeil YA, Sapuan SM, Abdan K, Zainudin ES (2012) Influence of fiber content on the mechanical and thermal properties of kenaf fiber reinforced thermoplastic polyurethane composites. Mater Des 40:299–303

    Article  CAS  Google Scholar 

  • Gemi L, Tarakçioğlu N, Akdemir A, Şahin ÖS (2009) Progressive fatigue failure behavior of glass/epoxy (±75)2 filament-wound pipes under pure internal pressure. Mater Des 30:4293–4298

    Article  CAS  Google Scholar 

  • Gordon B (2006) Metal prepreg filament winding. SAMPE J 42:6–11

    CAS  Google Scholar 

  • Ha SK, Jeong JY (2005) Science and effects of winding angles on through-thickness properties and residual strains of thick filament wound composite rings. Compos Sci Technol 65:27–35

    Article  CAS  Google Scholar 

  • Hambali A, Sapuan SM, Ismail N, Nukman Y (2009) Application of analytical hierarchy process in the design concept selection of automotive composite bumper beam during the conceptual design stage. Sci Res Essays 4:198–211

    Google Scholar 

  • Hernández-Moreno H, Douchin B, Collombet F, Choqueuse D, Davies P (2008) Influence of winding pattern on the mechanical behavior of filament wound composite cylinders under external pressure. Compos Sci Technol 68:1015–1024

    Article  Google Scholar 

  • Ishak MR, Leman Z, Sapuan SM, Edeerozey AMM, Othman IS (2010) Mechanical properties of kenaf bast and core fibre reinforced unsaturated polyester composites. IOP Conf Series: Mater Sci Eng 11:012006

    Google Scholar 

  • Ishak MR, Sapuan SM, Leman Z, Rahman MZA, Anwar UMK (2012) Characterization of sugar palm (Arenga pinnata) fibres. J Therm Anal Calorim 109:981–989

    Article  CAS  Google Scholar 

  • Krishnamurthy TN, Idkan M (2014) Fabrication of low cost filament winding machine. Int J Recent Trend Electr Electron Eng 4:30–39

    Google Scholar 

  • Lehtiniemi P, Dufva K, Berg T, Skrifvars M, Järvelä P (2011) Natural fiber-based reinforcements in epoxy composites processed by filament winding. J Reinf Plast Compos 30:1947–1955

    Article  CAS  Google Scholar 

  • Mahdi E, Hamouda AMS, Sahari BB, Khalid YA (2002) Effect of material and geometry on crushing behaviour of laminated conical composite shells. Appl Compos Mater 9(5):265–290

    Article  Google Scholar 

  • Mallick PK (2008) Fiber-reinforced composites: materials, manufacturing, and design, 3rd edn. CRC Press, Boca Raton

    Google Scholar 

  • Meijer G, Ellyin F (2008) A failure envelope for ±60° filament wound glass fibre reinforced epoxy tubulars. Compos A Appl Sci Manuf 39:555–564

    Article  Google Scholar 

  • Misri S, Ishak MR, Sapuan SM, Leman Z (2014) Split disk properties of kenaf-reinforced unsaturated polyester composites processed by filament winding. In: Colloquium on biocomposite technology 2014. Serdang, Malaysia. 24 November 2014, Book of Abstract, p 5

    Google Scholar 

  • Misri S, Sapuan SM, Leman Z, Ishak MR (2015) Torsional behaviour of filament wound kenaf yarn fibre reinforced unsaturated polyester composite hollow shafts. Mater Des 65:953–960

    Article  CAS  Google Scholar 

  • Morozov EV (2006) The effect of filament-winding mosaic patterns on the strength of thin-walled composite shells. Compos Struct 76:123–129

    Article  Google Scholar 

  • Mutasher SA, Sahari BB, Hamouda AMS, Sapuan SM (2007) Experimental study of bending fatigue characteristics of a hybrid aluminum/composite drive shaft. J Compos Mater 41:2267–2288

    Article  CAS  Google Scholar 

  • Mutasher S, Mir-nasiri N, Lee CL (2012) Small-scale filament winding machine for producing fiber composite products. J Eng Sci Technol 7:156–168

    Google Scholar 

  • Nadia K, Ishak MR (2014) Bending fatigue – kenaf fibre hollow shaft composite: a review. In: The postgraduate symposium on composites science and technology 2014 & the 4th postgraduate seminar on natural fibre composites 2014, 28 January 2014, Putrajaya, pp 193–199

    Google Scholar 

  • Park J, Hong C, Kim C, Kim C (2002) Analysis of filament wound composite structures considering the change of winding angles through the thickness direction. Compos Struct 55:63–71

    Article  Google Scholar 

  • Peters ST, Humphrey WD (1987) Filament winding. In: Dostal CA (ed) Engineered materials handbook, volume 1: composites. ASM International, Materials Park

    Google Scholar 

  • Sapuan SM, Abdalla HS (1998) A prototype knowledge-based system for the material selection of polymeric-based composites for automotive components. Compos A Appl Sci Manuf 29:731–742

    Article  Google Scholar 

  • Sapuan SM, Jacob MSD, Mustapha F, Ismail N (2002) A prototype knowledge-based system for material selection of ceramic matrix composites of automotive engine components. Mater Des 23:701–708

    Article  CAS  Google Scholar 

  • Sapuan SM, Maleque MA, Hameedullah M, Suddin MN, Ismail N (2005) A note on the conceptual design of polymeric composite automotive bumper system. J Mater Process Technol 159:145–151

    Article  Google Scholar 

  • Sastra HY, Siregar JP, Sapuan SM, Hamdan MM (2006) Tensile properties of Arenga pinnata fiber-reinforced epoxy composites. Polym Plast Technol Eng 45:149–155

    Article  CAS  Google Scholar 

  • Shaw-Stewart D (1985) Filament winding. Mater Eng 6:140–144

    Google Scholar 

  • Velosa JC, Nunes JP, Antunes PJ, Silva JF, Marques AT (2009) Development of a new generation of filament wound composite pressure cylinders. Compos Sci Technol 69:1348–1353

    Article  CAS  Google Scholar 

  • Wang X, Lou DYS, Zhang N (2004) A helical tow model and numerical simulation of on-line thermal curing of thermoset composites in filament winding. Int J Heat Mass Transfer 47:4807–4820

    Article  Google Scholar 

  • Yusoff MZM, Salit MS, Ismail N, Wirawan R (2010) Mechanical properties of short random oil palm fibre reinforced epoxy composites. Sains Malaysiana 39:87–92

    CAS  Google Scholar 

  • Zu L (2012) Design and optimization of filament wound composite pressure vessels. Ph.D. Thesis, Delft University, Netherlands

    Google Scholar 

Download references

Acknowledgements

The authors wish to thank the Universiti Putra Malaysia for the funding support through Research University Grant Scheme (RUGS 2-2012), project number: 05-02-12-1916RU. The support provided by staff of the Institute of Tropical Forestry and Forest Products (INTROP), Universiti Putra Malaysia, is highly appreciated.

Author information

Authors and Affiliations

  1. Department of Mechanical and Manufacturing Engineering, Universiti Putra Malaysia (UPM), 43400, Serdang, Selangor, Malaysia

    S. Misri, S. M. Sapuan & Z. Leman

  2. Aerospace Malaysia Innovation Centre, Universiti Putra Malaysia (UPM), 43400, Serdang, Selangor, Malaysia

    M. R. Ishak

  3. Laboratory of Biocomposite Technology, Institute of Tropical Forestry and Forest Products (INTROP), Universiti Putra Malaysia (UPM), 43400, Serdang, Selangor, Malaysia

    M. R. Ishak & S. M. Sapuan

  4. Aerospace Manufacturing Research Centre (AMRC), Universiti Putra Malaysia (UPM), 43400, Serdang, Selangor, Malaysia

    S. M. Sapuan

  5. Materials Technology and Processing Laboratory, Institute of Advanced Technology (ITMA), Universiti Putra Malaysia (UPM), 43400, Serdang, Selangor, Malaysia

    S. M. Sapuan

Authors
  1. S. Misri
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. M. R. Ishak
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. S. M. Sapuan
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Z. Leman
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to S. M. Sapuan .

Editor information

Editors and Affiliations

  1. Faculty of Engineering, Universiti Putra Malaysia, Selangor, Malaysia

    Mohd Sapuan Salit

  2. Laboratory of Biocomposite Technology, Universiti Putra Malaysia, Selangor, Malaysia

    Mohammad Jawaid

  3. Department of Mechanical Engineering, Universiti Malaya, Kuala Lumpur, Malaysia

    Nukman Bin Yusoff

  4. University of King Faisal,Al-Hofuf,Al-Hassa,Saudi Arabia, Department of Biomedical Engineering, Al-Hofuf, Saudi Arabia

    M. Enamul Hoque

Rights and permissions

Reprints and permissions

Copyright information

© 2015 Springer International Publishing Switzerland

About this chapter

Cite this chapter

Misri, S., Ishak, M.R., Sapuan, S.M., Leman, Z. (2015). Filament Winding Process for Kenaf Fibre Reinforced Polymer Composites. In: Salit, M., Jawaid, M., Yusoff, N., Hoque, M. (eds) Manufacturing of Natural Fibre Reinforced Polymer Composites. Springer, Cham. https://doi.org/10.1007/978-3-319-07944-8_18

Download citation

Publish with us

Policies and ethics

Search

Navigation