Abstract
Previous work has shown that, under some circumstances, failure of polymer-matrix fiber composites under bending fatigue loading can transition from compressive/local buckling failure to tensile/fiber fracture failure. For low cycle fatigue, failure tends to be compressive in nature and can be modeled based on kink band theory. For high cycle fatigue, failure tends to be tensile and can be modeled based on a fatigue damage/wear-out model. In this work, we investigate the effect of load ratio on the transition from low cycle/compressive failure to high cycle/tensile failure for a unidirectional polyester/glass fiber composite. The stiffness degradation of the beams under changing loading conditions is also investigated.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Makeev A, Nikishkov Y (2011) Fatigue life assessment for composite structure. In: Proceedings of the 26th ICAF symposium (June 1–3), Montreal
Momenkhani K, Sarkani S (2006) A new method for predicting the fatigue life of fiber-reinforced plastic laminates. J Compos Mater 40(21):1971–1982
Labeas GN et al (2012) Adaptive progressive damage modeling for large-scale composite structures. Int J Damage Mech 21:441–462
Varvani-Farahani A et al (2006) A fatigue damage parameter for life assessment of off-axis unidirectional GRP composites. J Compos Mater 40(18):1659–1670
Van der Meer FP, Sluys LJ (2009) Continuum models for the analysis of progressive failure in composite laminates. J Compos Mater 43(20):2131–2156
Riccio A (2005) Effects of geometrical and material features on damage onset and propagation in single-lap bolted composite joints under tensile load: part II – numerical studies. J Compos Mater 39(23):2091–2112
Subramanian S et al (1995) A cumulative damage model to predict the fatigue life of composite laminates including the effect of a fibre-matrix interphase. Int J Fatigue 17(5):434–351
Wu F, Yao W (2010) A fatigue damage model of composite materials. Int J Fatigue 32:134–138
Mao H, Mahadevan S (2002) Fatigue damage modeling of composite materials. Compos Struct 58:405–410
Shi W et al (2011) A damage mechanics model for fatigue life prediction of fiber reinforced polymer composite lamina. Acta Mechanica Solida Sinica 24(5):399–410
Owen MJ, Howe RJ (1972) The accumulation of damage in a glass-reinforced plastic under tensile and fatigue loading. J Phys D Appl Phys 5:1637–1653
Kawai M, Suda H (2004) Effects of non-negative mean stress on the off-axis fatigue behavior of unidirectional carbon/epoxy composites at room temperature. J Compos Mater 38(10):833–854
Davila CG et al (2005) Failure criteria for FRP laminates. J Compos Mater 39(4):323–345
Yeh H-Y et al (2008) An investigation of failure criterion for new orthotropic ceramic matrix composite materials. J Reinforc Plast Compos 28(4):441–459
Hanus E, Ericsson T (1995) Influence of four-point bending fatigue on the residual stress state of a pressure-rolled, particulate-reinforced metal matrix composite. Mater Sci Eng A 194:147–156
Epaarachchi JA, Clausen PD (2003) An empirical model for fatigue behavior prediction of glass fibre-reinforced plastic composites for various stress ratios and test frequencies. Composites A 34:313–326
Momenkhani K, Sarkani S (2005) Development and application of a model using center of gravity hysteresis loops to predict fatigue damage accumulation in fiber-reinforced plastic laminates. J Compos Mater 39(6):557–575
Dowling NE (2004) Mean stress effects in stress-life and strain-life fatigue. SAE Technical Paper 2004-01-2227
Budianski B, Fleck NA (1993) Compressive failure of fibre composites. J Mech Phys Solid 41(1):183–211
Slaughter WS, Fleck NA (1993) Compressive fatigue of fibre composites. J Mech Phys Solid 41(8):1265–1284
Diao X et al (1995) A statistical model of residual strength and fatigue life of composite laminates. Compos Sci Technol 54:329–336
Chawla T (2013) Mechanical characterization of composite repairs for fiber-glass wind turbine blades. Ph.D. Thesis, University of North Dakota
ASTM D6272–10 (2010) Standard test method for flexural properties of unreinforced and reinforced plastics and electrical insulating materials by four-point bending. ASTM, West Conshohocken, PA
Sendeckyj GP (1981) Fitting models to composite material fatigue data. In: Test methods and design allowables for fibrous composites
Slaughter WS, Fleck NA (1993) Compressive fatigue failure of fiber composites. Cambridge University, Engineering Department, Cambridge, UK
ImageJ: Image processing and analysis in Java. National Institutes of Health. Accessed from http://imagej.nih.gov/ij/ on 3/8/14
Reimbayev M (2012) Fatigue behavior of continuous fiber-reinforced composite beams. M.S. Thesis. University of North Dakota
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2015 The Society for Experimental Mechanics, Inc.
About this paper
Cite this paper
Rasheduzzaman, M., Cavalli, M.N. (2015). Failure Mode Transition in Fiber Composite Fatigue. In: Carroll, J., Daly, S. (eds) Fracture, Fatigue, Failure, and Damage Evolution, Volume 5. Conference Proceedings of the Society for Experimental Mechanics Series. Springer, Cham. https://doi.org/10.1007/978-3-319-06977-7_22
Download citation
DOI: https://doi.org/10.1007/978-3-319-06977-7_22
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-06976-0
Online ISBN: 978-3-319-06977-7
eBook Packages: EngineeringEngineering (R0)