Abstract
The E-latch is a new automotive mechatronic device that substitutes the door closure mechanical system with electro-actuated parts plus an embedded electronic control unit (ECU) connected to the main vehicle network. Due to severe automotive safety-critical requirements for door closure, an energy back-up system is required. A solution based on supercaps and boost converter is proposed in this work to ensure E-latch operation even in case of main battery failure. An in-depth thermal, electrical and durability characterization of the supercaps proves the reliability of the energy back-up unit for automotive applications. A Components Off the Shelf (COTS) approach has been followed for the E-latch prototype and test phases. A migration towards an Application Specific Integrated Circuit (ASIC) design approach is envisaged for future large volume production.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Flamings, B.: Automotive electronics. IEEE Veh. Technol. Mag. 1(1), 40–42 (2006)
Baronti, F., Lazzeri, A., Roncella, R., Saletti, R., Saponara, S.: Design and characterization of a Robotized Gearbox System based on Voice Coil Actuators for a Formula SAE race car. IEEE/ASME Trans. Mechatron. 18(1), 53–61 (2013)
Costantino, N., et al.: Design and test of an HV-CMOS intelligent power switch with integrated protections and self-diagnostic for harsh automotive applications. IEEE Trans. Ind. Electron. 58(7), 2715–2727 (2011)
Baronti, F., Lenzi, F., Roncella, R., Saletti, R., Di Tanna, O.: Electronic Control of a Motorcycle Suspension for Preload Self-Adjustment. IEEE Trans. Ind. Electron. 55(7), 2832–2837 (2008)
Zhaoxia, X., Youcheng, L.: IEEE hardware design of automobile door with local interconnect network bus. In: IEEE Conference on Control, Automation and System Engin (CASE), pp. 1–4 (2011)
Saponara, S., et al.: A flexible LED driver for automotive lighting applications: IC design and experimental characterization. IEEE Trans. Power Electron. 27(3), 1071–1075 (2012)
Quian, H.: MM912F634 (Quest) Workshop. www.freescale.com.cn/dwf/download/IDCQuestWorkshopPublic.pdf (2010)
VNH2SP30: Automotive fully integrated H-bridge motor driver, p. 33 (2008)
Hillenbrand, M., et al.: Failure mode and effect analysis based on electric and electronic architectures of vehicles to support the safety lifecycle ISO/DIS 26262. In: IEEE International Symposium on Rapid System Prototyping (RSP) 2010, pp. 1–7 (2010)
Mayer, A., Hellwig, F.: System performance optimization methodology for Infineon’s 32-bit automotive microcontroller architecture. In: 2008 Design, Automation and Test in Europe (DATE) Conference, pp. 962–966 (2008)
Zhang, G.: Freescale automotive microcontroller roadmap. August 2011, doc. n. FTF -AUT-F0783
Saponara, S., et al.: Architectural exploration and design of Time-interleaved SAR arrays for low-power and high speed A/D converters. IEICE Trans. Electron. 6(E92-C), 843–851 (2009)
Brandl, M. et al.: Batteries and battery management systems for electric vehicles. In: IEEE DATE 2012, pp. 971–976 (2012)
Einhorn, M., Conte, F.V., Kral, C., Fleig, J.: Comparison, selection, and parameterization of electrical battery models for automotive applications. IEEE Trans. Power Electron. 28(3), 1429–1437 (2013)
Gualous, H., Bouquain, D., Berthon, A., Kauffmann, J.M.: Experimental study of supercapacitor serial resistance and capacitance variations with temperature. J. Power Sour. 12, 86–93 (2003)
Zhang, Y.C., Wei, L., Shen X.: Haiquan Liang: Study of supercapacitor in the application of power electronics. WSEAS Trans.Circ. Syst. 8(6), 508–517 (2009)
Chang, J.H., Dawson, F.P., Lian, K.K.: A first principles approach to develop a dynamic model of electrochemical capacitors. IEEE Trans. Power Electr. 26(12), 3472–3480 (2011)
Rizoug, N., Bartholomeüs, P., Le Moigne, P.: Modeling and characterizing supercapacitors using an online method. IEEE Trans. Ind. Electron. 57(12), 3980–3990 (2010)
Gualous, H., Louahlia, H., Gallay, R.: Supercapacitor characterization and thermal modelling with reversible and irreversible heat effect. IEEE Trans. Power Electr. 26(11), 3402–3409 (2011)
Kotz, R., Hahn, M., Gallay, R.: Temperature behavior and impedance fundamentals of suercapacitors. J. Power Sour. 154(2), 550–555 (2006)
El Brouji, E.L.H. et al.: Aging assessment of supercapacitors during calendar life and power cycling tests. In: IEEE Energy Conversion Congress and Exposition (ECCE), pp. 1791–1798 (2009)
Acknowledgments
This work has been supported by Tuscany Region under the project “AMDS: Advanced Mechatronic Door System”.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2014 Springer International Publishing Switzerland
About this paper
Cite this paper
Saponara, S., Saletti, R., Fanucci, L., Roncella, R., Marlia, M., Taviani, C. (2014). SuperCap-Based Energy Back-up System for Automotive Electronic Control Units. In: De Gloria, A. (eds) Applications in Electronics Pervading Industry, Environment and Society. Lecture Notes in Electrical Engineering, vol 289. Springer, Cham. https://doi.org/10.1007/978-3-319-04370-8_1
Download citation
DOI: https://doi.org/10.1007/978-3-319-04370-8_1
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-04369-2
Online ISBN: 978-3-319-04370-8
eBook Packages: EngineeringEngineering (R0)