Abstract
Traditional 2D images provide limited use for accurate planning of spine interventions, mainly due to the complex 3D anatomy of the and spine, and close proximity of nerve bundles and vascular structures that must be avoided during the procedure. Our clinician-friendly platform for spine surgery planning takes advantage of 3D pre-operative images, to enable oblique reformatting and 3D rendering of individual or multiple vertebrae, interactive templating and placement of virtual pedicle implants, and provide surrogate estimates of the “fastening strength” of implanted pedicle screws based on implant dimension and bone mineral density of the displaced bone substrate. Preliminary studies using retrospective clinical data have demonstrated the feasibility of the platform in assisting the surgeon with selection of appropriate size implant and trajectory that provides optimal “fastening strength”, given the intrinsic vertebral geometry and bone mineral density.
Keywords
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Cohen M, Wall E, Brown R, Rydevik B, Garfin S (1990) Cauda equina anatomy II: extrathecal nerve roots and dorsal root ganglia. Spine 15:1248–1251
Rauschning W (1983) Computed tomography and cryomicrotomy of lumbar spine specimens: a new technique for multi-planar anatomic correlation. Spine (Phila Pa 1976) 8(2):170–180
Rauschning W (1987) Normal and pathologic anatomy of the lumbar root canals. Spine 12:1008–1019
Rydevik B, Brown M, Lundborg G (1984) Pathoanatomy and pathophysiology of nerve root compression. Spine 9:7–15
Wall E, Cohen M, Massie J, Rydevik B, Garfin S (1990) Cauda equine anatomy I: intrathecal nerve root organization. Spine 15:1244–1247
Hanson D, Robb RASA, Augustine KE, Cameron BM, Camp JJ, Karwoski RA, Larson AG, Stacy MC, Workman EL (1997) New software toolkits for comprehensive visualization and analysis of three-dimensional multimodal biomedical images. J Digit Imaging 10(Suppl. 1):229–230
Augustine K, Holmes III DR, Hanson D, Robb RA (2006) Comprehensive, powerful, efficient, intuitive: a new software framework for clinical imaging applications, pp 61,410N–10
Cameron BM, Manduca A, Robb RA (1996) Patient specific anatomic models: geometric surface generation from 3D medical images using a specified polygonal budget. In: Sieburg H, Weghorst S, Morgan K (eds) Health care in the information age. IOS Press and Ohmsha, pp 447–460
Lin WT, Robb RA (1999) Dynamic volume texture mapping and model deformation for visually realistic surgical simulation. Stud Health Technol Inform 62:198–204
Robb RA, Cameron BM, Aharon S (1997) Efficient shape-based algorithms for modeling patient specific anatomy from 3D medical images: applications in virtual endoscopy and surgery. In: Proceedings of the shape modeling and applications, pp 97–108
Homolka P, Gahleitner A, Prokop M, Nowotny R (2002) Bone mineral density measurement with dental quantitative CT prior to dental implant placement in cadaver mandibles: pilot study. Radiology 224(1):247–252
Jiang Y, Zhao J, Augat P, Ouyang X, Lu Y, Majumdar S, Genant HK (1998) Trabecular bone mineral and calculated structure of human bone specimens scanned by peripheral quantitative computed tomography: relation to biomechanical properties. Biomed Eng Online 13:1783–1790
Ortmaier T, Weiss H, Döbele S, Schreiber U (2006) Experiments on robot-assisted navigated drilling and milling of bones for pedicle screw placement. Int J Med Robot 2:350–363
Acknowledgments
The authors would like to thank all members of the Biomedical Imaging Resource who have helped with the development and implementation of this project, especially Alan Larson, Bruce Cameron, Phillip Edwards, and Dennis Hanson. Also, we would like to acknowledge our clinical collaborators for their continuous support: Dr. Jonathan Morris, Dr. Jane Matsumoto, and Dr. Shyam Shridharani.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2014 Springer International Publishing Switzerland
About this paper
Cite this paper
Linte, C.A. et al. (2014). Formulating a Pedicle Screw Fastening Strength Surrogate via Patient-Specific Virtual Templating and Planning. In: Tavares, J., Luo, X., Li, S. (eds) Bio-Imaging and Visualization for Patient-Customized Simulations. Lecture Notes in Computational Vision and Biomechanics, vol 13. Springer, Cham. https://doi.org/10.1007/978-3-319-03590-1_11
Download citation
DOI: https://doi.org/10.1007/978-3-319-03590-1_11
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-03589-5
Online ISBN: 978-3-319-03590-1
eBook Packages: EngineeringEngineering (R0)