Study of PDMS as Dielectric Layer in Electrowetting Devices

  • Shiraz Sohail
  • Debanjan Das
  • Soumen Das
  • Karabi Biswas
Part of the Environmental Science and Engineering book series (ESE)

Abstract

An electrowetting-on-dielectric (EWOD) device by using Polydimethylsiloxane (PDMS) as dielectric layer has been fabricated. Aluminium metal film is used for EWOD electrode fabrication. Teflon AF 1600 thin film is coated to improve hydrophobicity and reduce liquid sticking (found in PDMS surface). Both PDMS and Teflon layer is deposited by spin coating. Direct coating of Teflon, on top of PDMS layer, results in poor quality film, because of inherent hydrophobic nature of PDMS. So, Oxygen plasma treatment of PDMS surface is carried, before Teflon coating. Movement of water droplet (conductivity: 250 μ S/m) is obtained at 150 V DC voltage supply. Present study demonstrates a simple, cost and time effective fabrication procedure for EWOD device.

Keywords

Electrowetting-on-dielectric (EWOD) PDMS Digital microfluidics Oxygen plasma treatment 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

Notes

Acknowledgments

The authors would like to thank Mr. Pradip Kumar Dey, Mr. Dipankar Mandal and Mr. Subir Dasgupta connected to MEMS & Microelectronics Lab of ATDC, IIT Kharagpur for their help. The authors are thankful to Department of Biotechnology, Government of India for financial assistance and support to carry out the research work (Project:BT/PR3713/MED/32/203/2011).

References

  1. 1.
    J. Berthier, Microdrops and Digital Microfluidics. William Andrew Inc., Norwich, New York, USA, (2008).Google Scholar
  2. 2.
    Y.-P. Zhao and Y. Wang, Reviews of Adhesion and Adhesives, 1, 114-174 (2013).CrossRefGoogle Scholar
  3. 3.
    K. Choi, A. H.C. Ng, R. Fobel and A. R. Wheeler, Annual Review of Analytical Chemistry, 5, 413-440 (2012).CrossRefGoogle Scholar
  4. 4.
    M. J. Schertzer, R. Ben-Mrad, P.E. Sullivan, Sensors and Actuators B: Chemical, B 145, 340–347 (2010).CrossRefGoogle Scholar
  5. 5.
    S. Sohail and K. Biswas, `A novel approach for droplet position sensing in electrowetting devices’, Accepted in IEEE SENSOR 2013, November 3-6, Baltimore, Maryland, USA.Google Scholar
  6. 6.
    L. Hong, S. Dharmatilleke, D. K. Maurya, and A. A. Tay, Microsystem technologies, 16, no. 3, 449-460 (2010).Google Scholar
  7. 7.
    M. Abdelgawad, and A. R. Wheeler, Advanced Material, 21, 920-925 (2009).Google Scholar

Copyright information

© Springer International Publishing Switzerland 2014

Authors and Affiliations

  • Shiraz Sohail
    • 1
  • Debanjan Das
    • 1
  • Soumen Das
    • 2
  • Karabi Biswas
    • 1
  1. 1.Department of Electrical EngineeringIndian Institute of Technology KharagpurKharagpurIndia
  2. 2.School of Medical Science and TechnologyIndian Institute of Technology KharagpurKharagpurIndia

Personalised recommendations