Abstract
In recent years the principles of industrialisation and prefabrication of factory-finished elements have gained more and more acceptance in the construction sector. Due to the limited duration of projects in this sector, manufacturing cells and assembly line configurations show a very short life time and they have to be highly flexible and adaptable to changing circumstances. This paper gives an overview about the state of the art in prefabrication and reconfigurability in the building industry. Based on the experiences from an industrial case study the paper shows the first research results of an approach to increase a company’s ability for smart reconfiguration of pre-assembly.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Ballard, G., Arbulu, R.: Making Fabrication Lean. In: Proceedings 12th International Group for Lean Construction, Elsinore, Denmark (2003)
Gidado, K.I.: Project complexity: the focal point of construction production planning. Construction, Management and Economics 14(3), 213–225 (1996)
Björnfot, A., Sardén, Y.: Prefabrication: A Lean Strategy for Value Generation in Construction. In: Proceedings 14th International Group for Lean Construction, Santiago, Chile (2006)
Tam, V.W.Y., Tam, C.M., Chan, J.K.W., Ng, W.C.Y.: Cutting Construction Wastes by Prefabrication. International Journal of Construction Management 6(1), 15–25 (2006)
Tatum, C.B., Vanegas, J.A., Williams, J.M.: Constructability Improvement Using Prefabrication, Pre-assembly and Modularisation. Technical Report 297, Construction Industry Institute, Stanford, USA (1986)
Lessing, J., Stehn, L., Ekholm, A.: Industrialized Housing: Definition and categorization of the concept. In: Proceedings IGLC-13, Sydney, Australia, pp. 474–480 (July 2005)
Koskela, L.: Is Structural Change the Primary Solution to the Problems of Construction? Building Research & Information 31(2), 85–96 (2003)
Höök, M., Stehn, L.: Lean principles in industrialized housing production: the need for a cultural change. Lean Construction Journal, 20–33 (2008)
Matt, D.T., Krause, D., Rauch, R.: Adaptation of the Value Stream Optimization approach to collaborative company networks in the construction industry. In: Proceedings 8th CIRP Conference on Intelligent Computation in Manufacturing Engineering, Naples, Italy (2012)
Koren, Y., Heisel, U., Jovane, F., Moriwaki, T., Pritschow, G., Ulsoy, G., Van Brussel, H.: Reconfigurable Manufacturing Systems. Annals of CIRP 48(2), 527–540 (1999)
Raouf, A., Ben-Daya, M.: Flexible manufacturing systems: recent developments. Elsevier, Amsterdam (1995)
Heisel, U., Martin, M.: Reconfigurable Machining Systems (Rekonfigurierbare Bearbeitungssysteme). wt Werkstattstechnik Online 94(10), 517–520 (2004)
ElMaraghy, H.A.: Changeable and Reconfigurable Manufacturing Systems. Springer, London (2009)
Koren, Y., Shpitalni, M.: Design of reconfigurable manufacturing systems. Journal of Manufacturing Systems 29(4), 130–141 (2010)
Gann, D.M.: Construction as a manufacturing process? Similarities and differences between industrialized housing and car production in Japan. Construction Management and Economics 14(5), 437–450 (1996)
Corwley, A.: Construction as a manufacturing process: Lessons from the automotive industry. Computers and Structures 67(5), 389–400 (1998)
Agapiou, A., Clausen, L.E., Flanagan, R., Norman, G., Notman, D.: The role of logistics in the materials flow control process. Construction Management and Economics 16(7), 131–137 (1998)
Naim, M., Barlow, J.: An innovative supply chain strategy for customized housing. Construction Management and Economics 21(6), 593–602 (2003)
Eastman, C.M., Sacks, R.: Relative productivity in the AEC industries in the United States for on-site and off-site activities. Journal of Construction Engineering and Management 134(7), 517–526 (2008)
NRC: Industrialization in Building Construction, in: IS 2009-147, Report on the Industry Stakeholder Meeting, National Research Council (NRC), Ottawa, Canada (April 24/25, 2009)
Girmscheid, G.: Industrialization in Building Construction - Production Technology or Management Concept? In: Proceedings of the 11th Joint CIB International Symposium, Helsinki, FI, vol. 1, pp. S. 427–S. 441 (2005)
Abdallah, A.: Managerial and economic optimization for prefabricated building system. Journal of Technological and Economic Development of Economy 13(1), 83–91 (2007)
Glass, J., Pepper, C.: Perceptions of Precast Concrete Cladding in the UK Market. Journal of Architectural Engineering and Design Management 1(4), 233–246 (2006)
Haas, C.T., Fagerlund, W.R.: Preliminary Research on Prefabrication, Pre-assembly, Modularization, and Off-site Fabrication in Construction. Research Report 171-11 (July), Construction Industry Institute, Univ. of Texas at Austin (2002)
Kamar, K.A.M., Hamid, Z.A., Alshawi, M.: The Critical Success Factors (CSFs) to the Implementation of Industrialized Building System (IBS) in Malaysia. In: Proceedings: TG57 - Special Track, 18th CIB World Building Congress, Salford, United Kingdom (2010)
Wiendahl, H.-P., ElMaraghy, H.A., Nyhuis, P., Zäh, M.F., Wiendahl, H.-H., Duffie, N., Brieke, M.: Changeable Manufacturing – Classification, Design and Operation. CIRP Annals – Manufacturing Technology 56(2), 783–809 (2007)
Koren, Y.: Reconfigurable Manufacturing and Beyond (Keynote Paper). In: Proceedings of CIRP 3rd International Conference on Reconfigurable Manufacturing, Ann Arbor, Michigan (2005)
Fujii, S., Morita, H., Kakino, Y.: Highly Productive and Reconfigurable Manufacturing System. In: Proceedings of the Pacific Conference on Manufacturing, Southfield-Detroit MI, USA, vol. 2, pp. 970–980 (2000)
Mehrabi, M.G., Ulsoy, A.G., Koren, Y.: Reconfigurable manufacturing systems: Key to future manufacturing. International Journal of Intelligent Manufacturing 11(4), 403–419 (2000)
ElMaraghy, H.A.: Flexible and Reconfigurable Manufacturing Systems Paradigms. International Journal of Flexible Manufacturing Systems, Special Issue: Reconfigurable Manufacturing Systems 17(4), 261–276 (2005)
Wiendahl, H.-P., Reichardt, J., Nyhuis, P.: Manual Factory Planning - concept, design and implementation of agile production (Handbuch Fabrikplanung – Konzept, Gestaltung und Umsetzung wandlungsfähiger Produktionsstätten). Carl Hanser, Munich/Vienna (2009)
Nyhuis, P., Kolakowski, M., Heinen, T.: Adequate and Economic Factory Transformability - Results of a Benchmarking. In: Proceedings of the 2nd International Conference on Changeable, Agile, Reconfigurable and Agile Production (CARV 2007), Toronto, Canada (2007)
Wang, W., Koren, Y.: Scalability planning for reconfigurable manufacturing systems. Journal of Manufacturing Systems 31(2), 83–91 (2012)
Paslawski, J.: Flexibility Implementation in Construction Process Engineering. In: The 25th International Symposium on Automation and Robotics in Construction, ISARC 2008, Vilnius, Lithuania, June 26-29 (2008)
Drunk, G.: How much modularity needs the assambly? Ten years of modular platforms for assembly systems (Wie viel Modularität braucht die Montage? Zehn Jahre modulare Plattformen für Montageanlagen), Report xpertgate (2007)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2014 Springer International Publishing Switzerland
About this paper
Cite this paper
Matt, D.T., Rauch, E., Franzellin, V. (2014). SMART Reconfigurability Approach in Manufacture of Steel and Façade Constructions. In: Zaeh, M. (eds) Enabling Manufacturing Competitiveness and Economic Sustainability. Springer, Cham. https://doi.org/10.1007/978-3-319-02054-9_6
Download citation
DOI: https://doi.org/10.1007/978-3-319-02054-9_6
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-02053-2
Online ISBN: 978-3-319-02054-9
eBook Packages: EngineeringEngineering (R0)