Abstract
The main goal in the design of milling processes for components in the aerospace industry is the optimization of productivity while maintainig process stability. These two goals can be conflicting, especially if long tools are required, which are particularly susceptible to vibrations. In order to reduce the number of costly experiments, simulation-based approaches can be used to evaluate generated NC programs beforehand. In this paper, a modeling approach for the detailed simulation of engagement conditions, process forces, and dynamic tool behavior is used to detect instable process conditions. Additionally, an algorithm is presented to change the axial immersion in order to avoid regenerative chatter during milling. To demonstrate the effectiveness of the simulation approach and of the compensation strategy, a comparison is shown between experimental and simulated results and between the workpiece generated by the original and the optimized NC programs.
Keywords
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.
This is a preview of subscription content, log in via an institution.
Buying options
Tax calculation will be finalised at checkout
Purchases are for personal use only
Learn about institutional subscriptionsReferences
Altintas, Y., Weck M.: Chatter stability of metal cutting and grinding. CIRP Ann. Manuf. Technol. 53(2):619–642 (2004)
Brecher, C., Esser, M., Witt, S.: Interaction of manufacturing process and machine tool. CIRP Ann. Manuf. Technol. 58(2):588–607 (2009)
Insperger, T., Stépán, G.: Semi-discretization for time-delay systems—stability and engineering applications. Springer, New York (2011) (ISBN 978-1-4614-0334-0)
Eksioglu, C., Kilic, Z.M., Altintas, Y.: Discrete-time prediction of chatter stability, cutting forces, and surface location errors in flexible milling systems. J. Manuf. Sci. Eng. 134(6), 061006 (2012)
Zabel, A., Odendahl, S., Peuker, A.: Combining different modeling techniques to optimize the simulation of the five-axis milling process. In: Proceedings of the 5th International Conference and Exhibition on Design and Production of Machines and Dies/Molds, pp. 155–160. Kusadasi, Turkey (2009)
Foley, J.D., van Dam, A., Feiner, S.K., Hughes, J.F. (1992): Computer graphics—principles and practice. Addison-Wesley, Reading
Surmann, T., Enk, D.: Simulation of milling tool vibration trajectories along changing engagement conditions. Int. J. Mach. Tools Manuf. 47(9), 1442–1448 (2007)
Kienzle, O., Victor, H.: Die Bestimmung von Kräften und Leistungen an spanenden Werkzeugen und Werkzeugmaschinen. VDI-Z 94(11–12), 299–305 (1952)
Weinert, K., Stautner, M.: An efficient discrete simulation for five-axis milling of sculptured surfaces. Prod. Eng. Res. Dev. 9(1), 47–51 (2002)
Ko, J.H., Shaw, K.C.: Chatter prediction algorithm in frequency domain for pocket milling. SIMTech Tech. Rep. 12(1), 15–21 (2011)
Acknowledgments
This work is based on investigations of the research project B2 of the Transregional Collaborative Research Center (TR) 10 and of the research project B2 of the Collaborative Research Center (SFB) 708, which are kindly funded by the German Research Foundation (DFG).
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2014 Springer International Publishing Switzerland
About this paper
Cite this paper
Odendahl, S., Joliet, R., Ungemach, E., Zabel, A., Kersting, P., Biermann, D. (2014). Simulation of the NC Milling Process for the Prediction and Prevention of Chatter. In: Denkena, B. (eds) New Production Technologies in Aerospace Industry. Lecture Notes in Production Engineering. Springer, Cham. https://doi.org/10.1007/978-3-319-01964-2_3
Download citation
DOI: https://doi.org/10.1007/978-3-319-01964-2_3
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-01963-5
Online ISBN: 978-3-319-01964-2
eBook Packages: EngineeringEngineering (R0)