Abstract
This paper analyzes the influence of the links dimensions on the kinematics of the knuckle joint press. At the same time, depending on the results of the analysis, is accomplished the selection of the manufacturing operation for each considered structure. Modelling the knuckle joint press structures was performed using SolidWorks application while their operation simulation and determination of kinematic parameters variation diagrams of the ram was done using SolidWorks Motion model.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Al-Arifi N, Zamani A, Khan J (2011) Billet optimization for steering knuckle using Taguchi methodology. Int J Comp Theory Eng 3(4)
Boerger D (2000) The use of link motion on mechanical presses, AIDA-Tech. AIDA-America Corporation
Der MT, Hsin PC, Wei CS, Chun YH, Tzuen LC (2007) Performance improvement of a punching mechanism for flexible printed circuit boards. In: Proceedings of the 13th world congress in mechanism and machine science, Guanajuato, A724, Besancon, France, pp 18–21 June 2007
Flexible on the Job (2012) Knuckle-joint presses for the Non-Automative Industry, Shuler Brochure, Netphen-Werthenbach
Osakada KV, Mori K, Altan T, Groche P (2011) Mechanical servo press technology for metal forming. Elsevier Editorial System(tm) for CIRP, Annals 2011, vol 60/2
Oza R, Patel SP (2011) Analysis and optimization of drive shaft in eccentric mechanical press. Int J Eng Res Appl (IJERA) 1(2):055–058
Reid D (1991) Fundamentals of tool design, Society of manufacturing engineers. Publications development department
Strano M, Albertelli P (2011) Eco-design of forming machines. Polytechnic University of Milan, Department of Mechanics
Tabără V, Catrina D, Ganea V (1976) Calculation, design and adjustment of presses. Technical Publishing House, Bucharest
Tabără V, Tureac I (1984) Machines for plastic deformation. Didactic and Pedagogical Publishing House, Bucharest
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2014 Springer International Publishing Switzerland
About this paper
Cite this paper
Tabără, I., Dogariu, C. (2014). Influence of Mechanical Press Dimensions on its Kinematic Behavior. In: Visa, I. (eds) The 11th IFToMM International Symposium on Science of Mechanisms and Machines. Mechanisms and Machine Science, vol 18. Springer, Cham. https://doi.org/10.1007/978-3-319-01845-4_22
Download citation
DOI: https://doi.org/10.1007/978-3-319-01845-4_22
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-01844-7
Online ISBN: 978-3-319-01845-4
eBook Packages: EngineeringEngineering (R0)