Abstract
Chapter explains the mechanism of fatigue life and strength loss. In addition to the explanation of the physical mechanism of this phenomenon, which properties of a material determine its susceptibility to non-proportional loading is also explained.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Bentachfine S, Pluvinage G, Toth LS, Azari Z (1996) Biaxial low cycle fatigue under non-proportional loading of a magnesium-lithium alloy. Eng Fract Mech 54(4):513–522. doi:10.1016/0013-7944(95)00223-5
Borodii MV, Shukaev SM (2007) Additional cyclic strain hardening and its relation to material structure, mechanical characteristics, and lifetime. Int J Fatigue 29(6):1184–1191. doi:10.1016/j.ijfatigue.2006.06.014
Borodii MV, Strizhalo VA (2000) Analysis of the experimental data on a low cycle fatigue under nonproportional straining. Int J Fatigue 22(4):275–282. doi:10.1016/S0142-1123(00)00005-0
Chen X, Gao Q, Sun XF (1996) Low-cycle fatigue under non-proportional loading. Fatigue Fract Eng Mater Struct 19(7):839–854. doi:10.1111/j.1460-2695.1996.tb01020.x
Colak OU (2004) A viscoplasticity theory applied to proportional and non-proportional cyclic loading at small strains. Int J Plast 20(8–9):1387–1401. doi:10.1016/j.ijplas.2003.07.002
Ding XQ, He GQ, Chen CS (2010) Study on the dislocation sub-structures of Al–Mg–Si alloys fatigued under non-proportional loadings. J Mater Sci 45(15):4046–4053. doi:10.1007/s10853-010-4487-3
Ellyin F, Golos K, Xia Z (1991) In-phase and out-of-phase multiaxial fatigue. J Eng Mater Technol Trans ASME 113(1):112–118. doi:10.1115/1.2903365
Fatemi A, Shamsaei N (2011) Multiaxial fatigue: an overview and some approximation models for life estimation. Int J Fatigue 33(8):948–958. doi:10.1016/j.ijfatigue.2011.01.003
Itoh T, Yang T (2011) Material dependence of multiaxial low cycle fatigue lives under non-proportional loading. Int J Fatigue 33(8):1025–1031. doi:10.1016/j.ijfatigue.2010.12.001
Itoh T, Sakane M, Ohnami M, Ameyama K (1992) Additional hardening due to nonproportional cyclic loading—Contribution of stacking fault energy. In: MECAMAT’92 Po, international seminar on multiaxial plasticity, Cachan, France, pp 43–50
Itoh T, Sakane M, Hata T, Hamada N (2006) A design procedure for assessing low cycle fatigue life under proportional and non-proportional loading. Int J Fatigue 28(5–6):459–466. doi:10.1016/j.ijfatigue.2005.08.007
Karolczuk A, Palin-Luc T (2013) Modelling of stress gradient effect on fatigue life using Weibull based distribution function. J Theor Appl Mech 51(2):297–311
Kida S, Itoh T, Sakane M, Ohnami M, Socie DF (1997) Dislocation structure and non-proportional hardening of Type 304 stainless steel. Fatigue Fract Eng Mater Struct 20(10):1375–1386. doi:10.1111/j.1460-2695.1997.tb01496.x
McEvily AJ, Johnston TL (1967) Role of cross-slip in brittle fracture and fatigue. Int J Fract Mech 3(1):45–74
Nishihara T, Kawamoto M (1945) The strength of metals under combined alternating bending and torsion with phase difference. Mem Coll Eng, Kyoto Imperial Univ 11:85–112
Papadopoulos IV (1995) A high-cycle fatigue criterion applied in biaxial and triaxial out-of-phase stress conditions. Fatigue Fract Eng Mater Struct 18(1):79–91. doi:10.1111/j.1460-2695.1995.tb00143.x
Papadopoulos IV, Davoli P, Gorla C, Filippini M, Bernasconi A (1997) A comparative study of multiaxial high-cycle fatigue criteria for metals. Int J Fatigue 19(3):219–235. doi:10.1016/S0142-1123(96)00064-3
Shamsaei N, Fatemi A (2010) Effect of microstructure and hardness on non-proportional cyclic hardening coefficient and predictions. Mat Sci Eng A-Struct 527(12):3015–3024. doi:10.1016/j.msea.2010.01.056
Skibicki D, Sempruch J, Pejkowski Ł (2014) Model of non-proportional fatigue load in the form of block load spectrum. Materialwiss Werkstofftech 45(2):68–78. doi:10.1002/mawe.201400206
Socie DF, Marquis GB (2000) Multiaxial fatigue. Society of Automotive Engineers
Zhang JX, Jiang YY (2005) An experimental investigation on cyclic plastic deformation and substructures of polycrystalline copper. Int J Plast 21(11):2191–2211. doi:10.1016/j.ijplas.2005.02.004
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Copyright information
© 2014 The Author(s)
About this chapter
Cite this chapter
Skibicki, D. (2014). The Sensitivity of Materials to Load Non-Proportionality. In: Phenomena and Computational Models of Non-Proportional Fatigue of Materials. SpringerBriefs in Applied Sciences and Technology(). Springer, Cham. https://doi.org/10.1007/978-3-319-01565-1_3
Download citation
DOI: https://doi.org/10.1007/978-3-319-01565-1_3
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-01564-4
Online ISBN: 978-3-319-01565-1
eBook Packages: EngineeringEngineering (R0)