Abstract
In time domain the asynchronous sampling is easy realized in hardware, but it leads to measurement error in energy measurement. Modified compound Simpson integral method is proposed to reduce the error. The computing formula is deduced. Ideal signals and distortion signals are simulated. Simulating results show the proposed integral method has the highest precision, compared with previous method, the precision is improved dramatically. The results also show the sampling rate has little influence on the measurement accuracy. So the new algorithm is practical and is easy realized by DSP.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Kusˇljevic´ MD, Tomic´ JJ, Marcˇetic DP (2009) Active power measurement algorithm for power system signals under non-sinusoidal conditions and wide-range frequency deviations. IET Gener Transm Distrib 3(1):57–65
Yi LQ, Song HN (2010) The application of compound Newton-cotes integral algorithm to energy measurement. Electr Meas Instrum 47(10):15–19 (In Chinese)
Feng WM, Shi BS, Wu ZJ (2011) The electric energy measurement method based on modified trapezoidal integral. In: International conference on electronics, communications and control, Ningbo, China, pp 2914–2917
Novotny M, Sedlacek M (2009) Measurement of active power by time-domain signal processing. Measurement 42(8):1139–1152
Agrez D (2008) Power measurement in the non-coherent sampling. Measurement 41:230–235
Sedlacek M, Stoudek Z (2011) Active power measurements–an overview and a comparison of DSP algorithms by noncoherent sampling. Metrol Meas Syst XVIII(2):173–184
Ortiz A, Ma˜nana M, Renedo CJ (2011) A new approach to frequency domain power measurement based on distortion responsibility. Electr Power Syst Res 81:202–208
Teng Zhaosheng, Luo Zhikun, Sun Chuanqi et al (2010) Harmonic energy measurement based on wavelet packet decomposition and reconstruction algorithm. Trans China Electrotech Soc 25(8):200–206 (In Chinese)
Nyarko D, Stromsmoe KA (1991) Analysis of truncation errors in asynchronous sampling of periodic signals. In: Proceedings of the 34th Midwest symposium on circuits and systems, Monterey, vol 2, pp 1117–1120
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2014 Springer International Publishing Switzerland
About this paper
Cite this paper
Zhang, M., Wei, H., Feng, W. (2014). The Precise Electric Energy Measurement Method Based on Modified Compound Simpson Integration. In: Wang, W. (eds) Mechatronics and Automatic Control Systems. Lecture Notes in Electrical Engineering, vol 237. Springer, Cham. https://doi.org/10.1007/978-3-319-01273-5_103
Download citation
DOI: https://doi.org/10.1007/978-3-319-01273-5_103
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-01272-8
Online ISBN: 978-3-319-01273-5
eBook Packages: EngineeringEngineering (R0)