Abstract
To investigate the post-failure dynamics of subaerial and subaqueous landslides in various environments, we need a detailed analysis of the geotechnical and rheological behaviour of fine-grained sediments. For fine-grained sediments found in the subaerial and subaqueous environments, rheological research should be conducted as a prelude to understanding flow behaviour and hazard assessment. In this paper, the rheological characteristics of Busan clays from the Nakdong deltaic plain are examined in a shear rate-controlled system. A comparison is made between the Busan clays and low-activity clays in terms of rheometer geometry. Flow curves obtained from the controlled shear rate and the shear stress mode are examined. The viscosity and yield stresses obtained from different geometries, which may produce wall-slip among cylinder, ball-measuring and vane-measuring systems, are highlighted. Based on the relationship between the liquidity index and rheological values (viscosity and yield stress), flow motions are compared. Results show that the differences in mobility are significant when assuming that the flowing materials behave as a Bingham fluid. The runout distance is controlled by the yield stress of fine-grained sediments. Differences in yield stress may be caused by wall roughness and the distance between the ball (vane) and the wall in the rheometer. Under the same geomorphological conditions, the runout distance calculated from vane-measuring systems is much lower than that from ball-measuring and cylinderic systems. These difficulties must be minimized to predict debris flow mobility and to correctly perform hazard risk assessment.
Keywords
This is a preview of subscription content, log in via an institution.
Buying options
Tax calculation will be finalised at checkout
Purchases are for personal use only
Learn about institutional subscriptionsReferences
Barnes HA (1999) The yield stress – a review or ‘παντ ρει’ – everything flows? J Non-Newton Fluid Mech 81:133–178
Chough SK, Jeong KS, Honza E (1985) Zoned facies of mass-flow deposits in the Uleung (Tsushima) Basin, East Sea (Sea of Japan). Mar Geol 65:113–125
Chung SG, Lee NK, Kim SR (2009) Hyperbolic method for prediction of prefabricated vertical drains performance. J Geotech Geoenviron Eng 135(10):1519–1528
Chung SG, Chung JG, Jang WY, Lee JM (2010) Correlations between CPT and FVT results for Busan clay. Mar Georesour Geotechnol 28(1):49–63
Coussot P (1994) Steady, laminar, flow of concentrated mud suspensions in open channel. J Hydraul Res 32(4):535–559
Coussot P, Piau J-M (1994) On the behavior of fine mud suspensions. Rheol Acta 33:175–184
Imran J, Harff P, Parker G (2001) A numerical model of submarine debris flows with graphical user interface. Comput Geosci 274(6):717–729
Jeong SW (2013) The viscosity of fine-grained sediments: a comparison of low- to medium-activity and high-activity clays. Eng Geol 154:1–5
Jeong SW, Locat J, Leroueil S, Malet J-P (2010) Rheological properties of fine-grained sediments: the roles of texture and mineralogy. Can Geotech J 47:1085–1100
Leroueil S, Tavenas F, LeBihan JP (1983) Propriétés caractéristiques des argiles de l’est du Canada. Can Geotech J 20:681–705
Locat J (1997) Normalized rheological behaviour of fine muds and their flow properties in a pseudoplastic regime. In: Proceedings 1st international conference on debris-flow hazards mitigation, San Francisco. ASCE, New York, pp 260–269
Locat J, Demers D (1988) Viscosity, yield stress, remoulded strength, and liquidity index relationships for sensitive clays. Can Geotech J 25:799–806
Locat J, Lee HJ (2002) Submarine landslides: advances and challenges. Can Geotech J 39:193–212
Locat J, Lee HJ, Locat P, Imran J (2004) Numerical analysis of the mobility of the Palos Verdes debris avalanche, California, and its implication for the generation of tsunamis. Mar Geol 23:269–280
Locat J, Lee H, ten Brink US, Twichell D, Geist E, Sansoucy M (2009) Geomorphology, stability and mobility of the Currituck slide. Mar Geol 264:28–40
Møller PCF, Mewis J, Bonn D (2006) Yield stress and thixotropy: on the difficulty of measuring yield stresses in practice. Soft Matt 2:274–283
Schatzmann M, Bezzola GR, Minor HE, Windhab EJ, Fischer P (2009) Rheometry for large-particulated fluids: analysis of the ball measuring system and comparison to debris flow rheometry. Rheol Acta 48:715–733
Scotto Di Santolo A, Pellegrino AM, Evangelista A, Coussot P (2012) Rheological behaviour of reconstituted pyroclastic debris flow. Geotechnique 62(1):19–27
Sosio R, Crosta GB (2009) Rheology of concentrated granular suspensions and possible implications for debris flow modelling. Water Resour Res 45:W03412, 1–16
Acknowledgments
The authors would like to thank the KIGAM research project (11-7622, 13-3212) and Integrated Ocean Drilling Program at KIGAM (12-9102-1) for their support. We also thank J.S. L’Heureux for valuable comments and reviewing parts of an earlier version of the manuscript.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2014 Springer International Publishing Switzerland
About this chapter
Cite this chapter
Jeong, S.W. et al. (2014). Preliminary Investigations of Rheological Properties of Busan Clays and Possible Implications for Debris Flow Modelling. In: Krastel, S., et al. Submarine Mass Movements and Their Consequences. Advances in Natural and Technological Hazards Research, vol 37. Springer, Cham. https://doi.org/10.1007/978-3-319-00972-8_5
Download citation
DOI: https://doi.org/10.1007/978-3-319-00972-8_5
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-00971-1
Online ISBN: 978-3-319-00972-8
eBook Packages: Earth and Environmental ScienceEarth and Environmental Science (R0)