Abstract
The development of micro-fluidic devices to support the systemic circulation of blood has been used either as a temporary bridge or as a recovery method to treat different heart diseases. Blood flow through these artificial micro-channels is a major challenge because blood at scales from tens to hundreds of microns behaves as a multiphase suspension of deformable particles. A homogeneous model of blood is not adequate if the effect of cell segregation through these devices is of interest to evaluate blood cell damage (e.g., hemolysis or thrombosis). To determine the flow field and model the occurrence of segregation, an Eulerian frame of reference is employed. The simulations are performed in a tube of internal diameter of 217 \(\upmu \)m. We find that the results contribute to improve the understanding of the fluid dynamics of blood as a multi-component medium. Our simulations are based on an alternative methodology for blood modelling at a lower computational cost compared to DNS.
Keywords
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Aarts P, van den Broek S, Prins G, Kuiken G, Sixma J, Heethaar R (1988) Blood platelets are concentrated near the wall and red blood cells, in the center in flowing blood. Arterioscler Thromb Vasc Biol 8:819–824
Almomani T, Udaykumar H, Marshall J, Chandran K (2008) Micro-scale dynamic simulation of erythrocyte-platelet interaction in blood flow. Ann Biomed Eng 36:905–920
Celik I (2008) Procedure for estimation and reporting of discretization error in CFD applications. J Fluid Eng 130:1–4
Eckstein E, Tilles A (1988) Conditions for the ocurrence of large near wall excess of small particles during blood flow. Microvasc Res 36:31–39
Gidaspow D, Huang J (2009) Kinetic theory based model for blood flow and its viscosity. Ann Biomed Eng 37:1534–1545
Goldsmith H, Bell D, Braovac S, Steinberg A, McIntosh F (1995) Physical and chemical effects of red cells in the shear-induced aggregation of human platelets. Biophys J 69:1584–1595
Ho B, Leal L (1974) Inertial migration of rigid spheres in two-dimensional unidirectional flows. J Fluid Mech 65:365–400
Hogg A (1994) The inertial migration of non-neutrally buoyant spherical particles in two-dimensional shera flows. J Fluid Mech 272:285–318
Jung J, Hassanein A (2008) Three-phase CFD analytical modeling of blood flow. Med Eng Phys 30:91–103
Massoudi M, Antaki J (2008) An anisotropic constitutive equation for the stress tensor of blood based on mixture theory. Math Prob Eng 2008:1–30
Matas J, Morris J, Guazzelli E (2004) Lateral forces on a sphere. Oil Gas Sci Technol Rev IFP 50:59–70
Nourbakhsh A, Mortazavi S (2010) A three dimensional study of the motion of a drop in plane Poiseuille flow at finite Reynolds numbers. Iranian J Sci Technol Trans B Eng 34:179–196
Roache P (1994) Perspective: a method for uniform reporting of grid refinement studies. J Fluid Eng 116:405–413
Segré G, Silberberg A (1962) Behaviour of macroscopic rigid spheres in Poiseuille flow: part 2. Experimental results and interpretation. J Fluid Mech 14:136–157
Tilles A, Eckstein E (1987) The near wall excess of platelets-sized particles in blood flow: Its dependance on hematocrit and wall shear rate. Microvasc. Res. 33:211–223
Won Y, Yul J (2008) The lateral migration of neutrally-buoyant spheres transported through square microchannels. J Micromech Microeng 18:065015
Yeh C, Calvez A, Eckstein E (1994) An estimated shape function for drift in a platelet-transport model. Biophys J 67:1252–1259
Zhao R, Kameneva M, Antaki J (2007) Investigation of platelet margination phenomena at elevated shear stress. Biorheology 44:161–177
Zhao R, Marhefka J, Shu F, Hund S, Kameneva M, Antaki J (2008) Micro-Flow visualization of red blood cell-enhanced platelet concentration at sudden expansion. Ann Biomed Eng 36:1130–1141
Acknowledgments
The authors gratefully acknowledge the financial support from Universidad Simón Bolívar’s Deanship of Research and Development under a Research Assistantship grant. Thanks also to the Laboratory of Fluid Mechanics at the Universidad Simón Bolívar, whose PC cluster hosted a large number of the simulations performed in this investigation, and supplied the ANSYS CFX licenses for the study. We would also like to thank Dr. Samuel Hund and Dr. James Antaki for their insightful guidelines and suggestions on benchmark databases to compare with our numerical model.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2014 Springer International Publishing Switzerland
About this chapter
Cite this chapter
Mubita, T.M., Rojas-Solórzano, L.R., Moreno, J.B. (2014). A Multiphase Approach to Model Blood Flow in Micro-tubes. In: Sigalotti, L., Klapp, J., Sira, E. (eds) Computational and Experimental Fluid Mechanics with Applications to Physics, Engineering and the Environment. Environmental Science and Engineering(). Springer, Cham. https://doi.org/10.1007/978-3-319-00191-3_11
Download citation
DOI: https://doi.org/10.1007/978-3-319-00191-3_11
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-00190-6
Online ISBN: 978-3-319-00191-3
eBook Packages: Earth and Environmental ScienceEarth and Environmental Science (R0)