Abstract
After four decades of successful spread of lean production, fundamental practices such as heijunka and jidoka seem rarely mentioned in Spanish forums. This paper explores, through a systematic review of the literature, the scientific production carried out by Spanish researchers related to the heijunka and jidoka methodologies. The papers reveal two strong research streams that allow the technological development of both practices and their application in Industry 4.0. However, further studies are required on industrial settings. The diffusion of both techniques in Spanish manufacturing plants can be felt intuitively, but not enough data are available for their characterization.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Ayneto, X.: La industria 4.0, el nuevo motor de la innovación industrial. Dir Organ 69, 99–110 (2019). https://doi.org/10.37610/dyo.v0i69.563
Bautista, J.: Métodos de planificación y secuenciación Heijunka inspirados en el problema del reparto en sistemas electorales. Dir Organ 73, 18–38 (2021a). https://doi.org/10.37610/dyo.v0i73.590
Bautista-Valhondo, J.: Exact and heuristic procedures for the Heijunka-flow shop scheduling problem with minimum makespan and job replicas. Prog. Artif. Intell. 10(4), 465–488 (2021b). https://doi.org/10.1007/s13748-021-00249-z
Coleman, B.J., Vaghefi, M.R.: Heijunka (?): a key to the toyota production system. Prod. Inventory Manag. J. 35(4), 31–35 (1994)
Escuder, M.T., Muñoz-Villamizar, M., Santos, J.: Can Lean eliminate waste in urban logistics? a field study. Int. J. Product. Perform. Manag. 71(2), 558–575 (2022). https://doi.org/10.1108/ijppm-04-2020-0167
Fortuny-Santos, J., Ruiz-De-Arbulo-López, P., Luján-Blanco, I., Chen, P.K.: Assessing the synergies between lean manufacturing and Industry 4.0. Dir. Organ. 71, 71–86 (2020). https://doi.org/10.37610/dyo.v0i71.579
Gil-Vilda, F., Yagüe-Fabra, J.A., Sunyer, A.: From lean production to lean 4.0: a systematic literature review with a historical perspective. Appl. Sci. 11, 10318 (2021). https://doi.org/10.3390/app112110318
Goti, A., De la Calle, A., Gil, M.J., Errasti, A., Bom, P.R.D., García-Bringas, P.: Development and application of an assessment complement for production system audits based on data quality, IT infrastructure, and sustainability. Sustainability 10(12), 4679 (2018). https://doi.org/10.3390/su10124679
Jones, D.T.: Heijunka: leveling production. Manuf. Eng. 137(2), 29–30, 32, 34, 36 (2006)
Kubiak, W.: Minimizing variations of production rates in just-in-time systems: a survey. Eur. J. Oper. Res. 66(3), 259–271 (1993). https://doi.org/10.1016/0377-2217(93)90215-9
Llorente Galera, F.: Organización laboral y sistemas de participación en la industria auxiliar del automóvil en Cataluña. Investig Eur Dir Econ Empresa 20(3), 140–150 (2014)
Nijs, S., Gallardo-Gallardo, E., Dries, N., Sels, L.: A multidisciplinary review into the definition, operationalization, and measurement of talent. J. World Bus. 49(2), 180–191 (2014). https://doi.org/10.1016/J.JWB.2013.11.002
Ohno, T.: Toyota Production System, Beyond Large-Scale, Production. Productivity Press, Abingdon (1988)
Olivella, J., Gregorio, R.: A case study of an integrated manufacturing performance measurement and meeting system. J. Manuf. Technol. Manag. 26, 515–535 (2015). https://doi.org/10.1108/JMTM-09-2012-0089
Sartal, A., Martínez-Senra, A.I., Cruz-Machado, V.: Are all lean principles equally eco-friendly? a panel data study. J. Clean. Prod. 177(8), 362–370 (2018). https://doi.org/10.1016/j.jclepro.2017.12.190
Serrano, I., Ochoa, C., De Castro, R.: Evaluation of value stream mapping in manufacturing systems redesigning. Int. J. Prod. Res. 46(16), 4409–4430 (2008). https://doi.org/10.1080/00207540601182302
Schmidt, D., Gevers, R., Schwiep, J., Ordieres-Meré, J., Villalba-Diez, J.: Deep learning enabling quality improvement in rotogravure manufacturing. Procedia Manuf. 51, 330–336 (2020). https://doi.org/10.1016/j.promfg.2020.10.047
Villalba-Diez, J., Gutierrez, M., Grijalvo Martín, M., Sterkenburgh, T., Losada, J.C., Benito, R.M.: Quantum JIDOKA: integration of quantum simulation on a CNC machine for in–process control visualization. Sensors 21(15), 5031 (2021). https://doi.org/10.3390/s21155031
Womack, J.P., Jones, D.T., Roos, D.: The Machine that Changed the World: The Story of Lean Production. Harper Perennial, New York (1991)
Acknowledgements
Research funded by Ministry of Science, Innovation and Universities (Spain) though the OPTHEUS project (ref. PGC2018‐095080‐B‐I00), including European Regional Development Funds (ERDF). Many thanks to Dr. Joaquín Bautista.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2024 The Author(s), under exclusive license to Springer Nature Switzerland AG
About this paper
Cite this paper
Fortuny-Santos, J., Ruiz de Arbulo, P. (2024). Heijunka and Jidoka in Spanish Research. A Systematic Literature Review. In: Bautista-Valhondo, J., Mateo-Doll, M., Lusa, A., Pastor-Moreno, R. (eds) Proceedings of the 17th International Conference on Industrial Engineering and Industrial Management (ICIEIM) – XXVII Congreso de Ingeniería de Organización (CIO2023). CIO 2023. Lecture Notes on Data Engineering and Communications Technologies, vol 206. Springer, Cham. https://doi.org/10.1007/978-3-031-57996-7_72
Download citation
DOI: https://doi.org/10.1007/978-3-031-57996-7_72
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-031-57995-0
Online ISBN: 978-3-031-57996-7
eBook Packages: EngineeringEngineering (R0)