Abstract
Fibre reinforced composite materials have been increasingly used in recent decades as reinforcement systems for masonry structures. Initially, externally bonded fibre reinforced polymer (FRP) sheets were mainly used in in structural applications. Subsequently, the use of composite materials with inorganic matrix (mainly, fiber reinforced cementitious matrix – FRCM) became widespread. Both systems present advantages and disadvantages that make them suitable in particular conditions and for specific practical applications. In any case, the structural effectiveness of such externally bonded reinforcements strongly depends on the composite-to-substrate adhesive capacity. The experimental behaviour of two different reinforcing systems (the first with organic matrix and the second having inorganic matrix) externally bonded to masonry pillars is compared in this paper.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Valluzzi, M.R., et al.: Round robin test for composite-to-brick shear bond characterization. Mater. Struct. 45, 1761–1791 (2012). https://doi.org/10.1617/s11527-012-9883-5
De Santis, S., Carozzi, F.G., de Felice, G., Poggi, C.: Test methods for textile reinforced mortar systems. Compos. B Eng. 127, 121–132 (2017). https://doi.org/10.1016/j.compositesb.2017.03.016
Bellini, A., et al.: Influence of different set-up parameters on the bond behaviour of FRCM composites. Constr. Build. Mater. 308, 124964 (2021). https://doi.org/10.1016/j.conbuildmat.2021.124964
de Felice, G., et al.: Recommendation of RILEM Technical Committee 250-CSM: test method for textile reinforced mortar to substrate bond characterization. Mater. Struct. 51(4), 1–9 (2018). https://doi.org/10.1617/s11527-018-1216-x
Rotunno, T., Fagone, M., Bertolesi, E., Grande, E., Milani, G.: Single lap shear tests of masonry curved pillars externally strengthened by CFRP strips. Compos. Struct. 200, 434–448 (2018). https://doi.org/10.1016/j.compstruct.2018.05.097
Khatir, A., Capozucca, R., Magagnini, E., Khatir, S., Bettucci, E.: Structural health monitoring for RC beam based on RBF neural network using experimental modal analysis. In: Capozucca, R., Khatir, S., Milani, G. (eds.) Proceedings of the International Conference of Steel and Composite for Engineering Structures. ICSCES 2022. LNCE, vol. 317, pp. 82–92. Springer, Cham (2023). https://doi.org/10.1007/978-3-031-24041-6_7
Fagone, M., Rotunno, T., Bertolesi, E., Grande, E., Milani, G.: An experimental study on the effectiveness of CFRP reinforcements applied to curved masonry pillars. In: Carcaterra, A., Paolone, A., Graziani, G. (eds.) Proceedings of XXIV AIMETA Conference 2019. AIMETA 2019. LNME, pp. 2134–2148. Springer, Cham (2020). https://doi.org/10.1007/978-3-030-41057-5_170
Capozucca, R., Khatir, A., Magagnini, E.: Experiences on anchorage systems for FRP rods. In: Capozucca, R., Khatir, S., Milani, G. (eds.) Proceedings of the International Conference of Steel and Composite for Engineering Structures. ICSCES 2022. LNCE, vol. 317, pp. 48–58. Springer, Cham (2023). https://doi.org/10.1007/978-3-031-24041-6_4
Bettucci, E., Capozucca, R., Khatir, A., Khatir, S., Magagnini, E.: Concrete plates reinforced with embedded CFRP rods and carbon/steel strips. In: Capozucca, R., Khatir, S., Milani, G. (eds.) Proceedings of the International Conference of Steel and Composite for Engineering Structures. ICSCES 2022. LNCE, vol. 317, pp. 70–81. Springer, Cham (2023). https://doi.org/10.1007/978-3-031-24041-6_6
Khatir, A., Tehami, M.: Finite element analysis of local buckling of steel-concrete continuous composite beams. In: Proceeding of the 2015 congress on Advanced in Structural Engineering and Mechanics (ASEM15) (2015). https://doi.org/10.13140/RG.2.1.2107.5606
Bertolesi, E., Fagone, M., Rotunno, T., Grande, E., Milani, G.: Experimental characterization of the textile-to-mortar bond through distributed optical sensors. Constr. Build. Mater. 326, 126640 (2022). https://doi.org/10.1016/J.CONBUILDMAT.2022.126640
Achouri, F., Khatir, A., Smahi, Z., et al.: Structural health monitoring of beam model based on swarm intelligence-based algorithms and neural networks employing FRF. J. Braz. Soc. Mech. Sci. Eng. 45, 621 (2023). https://doi.org/10.1007/s40430-023-04525-y
Rotunno, T., Fagone, M., Grande, E., Milani, G.: FRCM-to-masonry bonding behaviour in the case of curved surfaces: experimental investigation. Compos. Struct. 116913 (2023). https://doi.org/10.1016/j.compstruct.2023.116913
European Standard (2016) EN 998-2 Specification for mortar for masonry - Part 2: Masonry mortar
Caggegi, C., Pensee, V., Fagone, M., Cuomo, M., Chevalier, L.: Experimental global analysis of the efficiency of carbon fiber anchors applied over CFRP strengthened bricks. Constr. Build. Mater. 53, 203–212 (2014). https://doi.org/10.1016/j.conbuildmat.2013.11.086
Fagone, M., Ranocchiai, G., Caggegi, C., Briccoli Bati, S., Cuomo, M.: The efficiency of mechanical anchors in CFRP strengthening of masonry: an experimental analysis. Compos. B Eng. 64, 1–15 (2014). https://doi.org/10.1016/j.compositesb.2014.03.018
Fagone, M., Ranocchiai, G., Briccoli Bati, S.: An experimental analysis about the effects of mortar joints on the efficiency of anchored CFRP-to-masonry reinforcements. Compos. Part B-Eng. 76, 133–148 (2015). https://doi.org/10.1016/j.compositesb.2015.01.50
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2024 The Author(s), under exclusive license to Springer Nature Switzerland AG
About this paper
Cite this paper
Fagone, M., Rotunno, T., Grande, E., Milani, G. (2024). The Bond Behaviour of FRP and FRCM Strengthening Sheets Externally Bonded to Masonry Pillars: An Experimental Based Comparison. In: Benaissa, B., Capozucca, R., Khatir, S., Milani, G. (eds) Proceedings of the International Conference of Steel and Composite for Engineering Structures. ICSCES 2023. Lecture Notes in Civil Engineering, vol 486. Springer, Cham. https://doi.org/10.1007/978-3-031-57224-1_8
Download citation
DOI: https://doi.org/10.1007/978-3-031-57224-1_8
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-031-57223-4
Online ISBN: 978-3-031-57224-1
eBook Packages: EngineeringEngineering (R0)