Abstract
Active suspension systems have long been recognized as an effective means of improving ride comfort and vehicle handling. However, high energy consumption and a lack of economic justification have hindered their commercial adoption in the industry. In order to address the challenges, this research proposed an innovative control structure that utilizes linear electromagnetic actuators capable of functioning in both motor and generator modes. To implement the proposed method, a suitable vehicle dynamic model available within the Adams software was selected. An analytical model corresponding to the software model was then extracted and verified to ensure its accuracy and reliability for use in GA optimization algorithms. Assuming only ride maneuvers, a feedback control structure based on meaningful terms in vehicle dynamics was developed. Then by using a GA algorithm, the ride comfort and energy harvesting criteria were simultaneously optimized. Finally, by exploiting the most suitable set of coefficients in the developed control structure, the suspension system showed the ability to recover up to 650 watts of power on rough roads, while leading to a 45% improvement in ride comfort.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Yu, J., Vladimir, V.: Control Applications of Vehicle Dynamics. CRC Press, Boca Raton (2021). https://doi.org/10.1201/9781003134305
Sun, W., Gao, H., Shi, P.: Advanced Control for Vehicle Active Suspension Systems, vol. 204. Springer, Heidelberg (2020). https://doi.org/10.1007/978-3-030-15785-2
Múčka, P.: Energy-harvesting potential of automobile suspension. Veh. Syst. Dyn. 54(12), 1651–1670 (2016). https://doi.org/10.1080/00423114.2016.1227077
Țoțu, V., Alexandru, C.: Multi-criteria optimization of an innovative suspension system for race cars. Appl. Sci. 11(9), 4167 (2021). https://doi.org/10.3390/app11094167
Ataei, M., et al: Multi-objective optimization of a hybrid electromagnetic suspension system for ride comfort, road holding and regenerated power. J. Vibr. Control 23(5), 782–793 (2017). https://doi.org/10.1177/1077546315585219
Yatak, M.Ö, Şahin, F.: Ride comfort-road holding trade-off improvement of full vehicle active suspension system by interval type-2 fuzzy control. Eng. Sci. Technol. Int. J. 24(1), 259–270 (2021). https://doi.org/10.1016/j.jestch.2020.10.006
Williams, D.E.: Active suspension: future lessons from the past. SAE Int. J. Veh. Dyn. Stab. NVH 2(10-02-02-0010), 147–165 (2018). https://doi.org/10.4271/10-02-02-0010
Wang, R., et al: Switching control of semi-active suspension based on road profile estimation. Veh. Syst. Dyn. 60(6), 1972–1992 (2022). https://doi.org/10.1080/00423114.2021.1889621
Tseng, H.E., Hrovat, D.: State of the art survey: active and semi-active suspension control. Veh. Syst. Dyn. 53(7), 1034-1062 (2015). https://doi.org/10.1080/00423114.2015.1037313
Deubel, C., Ernst, S., Prokop, G.: Objective evaluation methods of vehicle ride com-fort-a literature review. J. Sound Vibr. 548, 117515 (2022). https://doi.org/10.1016/j.jsv.2022.117515
Du, Y., et al: A hierarchical framework for improving ride comfort of autonomous vehicles via deep reinforcement learning with external knowledge. Comput. Aided Civil Infrastruct. Eng. 38, 1059–1078 (2022). https://doi.org/10.1111/mice.12934
ISO 2631: Mechanical vibration and shock -Evaluation of human exposure to whole-body vibration (1997)
Darabseh, T., Al-Yafeai, D., Mourad, A.H.I.: Energy harvesting from car suspension system: mathematical approach for half car model. J. Mech. Eng. Sci. 15(1), 7695–7714 (2021). https://doi.org/10.15282/jmes.15.1.2021.07.0607
Lv, X. et al.: Research review of a vehicle energy-regenerative suspension system. Energies 13(2), 441 (2020). https://doi.org/10.3390/en13020441
Abdelkareem, M.A.A., et al.: Vibration energy harvesting in automotive suspension system: A detailed review. Appl. Energy 229, 672–699 (2018). https://doi.org/10.1016/j.apenergy.2018.08.030
Tulsian, N., Dewangan, S.: A discussion on energy harvesting through sus-pension system. Mater. Today Proc. 79, 189–192 (2023). https://doi.org/10.1016/j.matpr.2022.10.052
Zhang, R., Wang, X., John, S.: A comprehensive review of the techniques on re-generative shock absorber systems. Energies 11(5), 1167 (2018). https://doi.org/10.3390/en11051167
Bennis, F., Bhattacharjya, R.K. (eds.): Nature-inspired methods for metaheuristics optimization. MOST, vol. 16. Springer, Cham (2020). https://doi.org/10.1007/978-3-030-26458-1
Llopis-Albert, C., Rubio, F., Zeng, S.: Multiobjective optimization framework for designing a vehicle suspension system. A comparison of optimization algo-rithms. Adv. Eng. Softw. 176, 103375 (2023). https://doi.org/10.1016/j.advengsoft.2022.103375
Katoch, S., Chauhan, S.S., Kumar, V.: A review on genetic algorithm: past, present, and future. Multimedia Tools Appl. 80(5), 8091–8126 (2020). https://doi.org/10.1007/s11042-020-10139-6
Bruni, S., et al.: State-of-the-art and challenges of railway and road vehicle dynamics with multibody dynamics approaches. Multibody Sys.Dyn. 49, 1–32 (2020). https://doi.org/10.1007/s11044-020-09735-z
Widner, A, Tihanyi, V., Tettamanti, T.: Framework for vehicle dynamics model validation. IEEE Access 10, 35422–35436 (2022). https://doi.org/10.1109/ACCESS.2022.3157904
Rill, G., Castro, A.A: Road Vehicle Dynamics: Fundamentals and Modeling with MATLAB®. CRC Press, Boca Raton (2020). https://doi.org/10.1201/9780429244476
Bagchi, K., et al: Designing and optimizing an active car suspension with genetic algorithm. In: 7th International Conference on Environment Friendly Energies and Applica-tions (EFEA). IEEE (2022). https://doi.org/10.1109/EFEA56675.2022.10063744
Peng, D., et al: Multiobjective optimization of an off-road vehicle suspension parame-ter through a genetic algorithm based on the particle swarm optimization. Math. Probl. Eng., 1–14 (2021). https://doi.org/10.1155/2021/9640928
Hamersma, H.A., Els, P.S.: Vehicle suspension force and road profile pre-diction on undulating roads. Veh. Syst. Dyn. 59(10), 1616–1642 (2021). https://doi.org/10.1080/00423114.2020.1774067
Múčka, P.: Simulated road profiles according to ISO 8608 in vibration analysis. J. Testing Eval. 46(1), 405–418 (2017). https://doi.org/10.1520/JTE20140493
ISO 8608: Second Edition, Mechanical vibration — Road surface profiles — Reporting of measured data (2016)
Du, Y., Liu, C., Li, Y.: Velocity control strategies to improve auto-mated vehicle driving comfort. IEEE Intell. Transp. Syst. Mag. 10(1), 8–18 (2018). https://doi.org/10.1155/2021/9445070
Čerškus, A., et al: Identification of road profile parameters from vehicle suspension dynamics for control of damping. Symmetry 13(7), 1149 (2021). https://doi.org/10.3390/sym13071149
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2024 The Author(s), under exclusive license to Springer Nature Switzerland AG
About this paper
Cite this paper
Sayyaadi, H., Seddighi, J. (2024). Simultaneous Optimization of Ride Comfort and Energy Harvesting Through a Regenerative, Active Suspension System Using Genetic Algorithm. In: García Márquez, F.P., Jamil, A., Hameed, A.A., Segovia Ramírez, I. (eds) Emerging Trends and Applications in Artificial Intelligence. ICETAI 2023. Lecture Notes in Networks and Systems, vol 960. Springer, Cham. https://doi.org/10.1007/978-3-031-56728-5_1
Download citation
DOI: https://doi.org/10.1007/978-3-031-56728-5_1
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-031-56727-8
Online ISBN: 978-3-031-56728-5
eBook Packages: EngineeringEngineering (R0)