Abstract
Zinc hot-dip galvanizing is one of the oldest methods of protection against corrosion. The goal of this study was to evaluate the influence of zinc bath temperature and immersion time on the coating quality. Three values of bath temperatures and two immersion times were selected. The surface roughness was measured with a surface roughness tester. The corrosion resistance of the samples was evaluated by salt spray corrosion test. The coating thickness was measured with a thickness gauge. The microstructure of the coatings was analyzed, and coating thickness values verified by image analysis methods.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Hamid, Z.A., Aal, A.A., Hassan, H.B., Shaaban, A.: Process and performance of hot dip zinc coatings containing ZnO and Ni–P under layers as barrier protection. Appl. Surf. Sci. 256(13), 4166–4170 (2010). https://doi.org/10.1016/j.apsusc.2010.01.119
Sirin, S.Y.: Effect of hot dip galvanizing on the fatigue behavior of hot rolled and ion nitrided AISI 4340 steel. Int. J. Fatigue 123, 1–9 (2019). https://doi.org/10.1016/j.ijfatigue.2019.01.001
Bakhtiari, A., Toroghinejad, M., Ashrafizadeh, F.: The effect of zinc bath temperature on the morphology, texture and corrosion behaviour of industrially produced hot-dip galvanized coatings. Metall. Mater. Eng. 20(1), 41–52 (2014)
Bicao, P., Jianhua, W., Xuping, S., Zhi, L., Fucheng, Y.: Effects of zinc bath temperature on the coatings of hot-dip galvanizing. Surf. Coat. Technol. 9(202), 1785–1788 (2008). https://doi.org/10.1016/j.surfcoat.2007.07.044
Chidambaram, P.R., Rangarajan, V., van Ooij, W.J.: Characterization of high temperature hot dip galvanized coatings. Surf. Coat. Technol. 3(46), 245–253 (1991). https://doi.org/10.1016/0257-8972(91)90167-U
Verma, A.R.B., van Ooij, W.J.: High-temperature batch hot-dip galvanizing. Part 2. Comparison of coatings formed in the temperature range 520–555 °C. Surf. Coat. Technol. 89(1–2), 143–150 (1997). https://doi.org/10.1016/S0257-8972(96)02940-4
Verma, A.R.B., van Ooij, W.J.: High-temperature batch hot-dip galvanizing. Part 1. General description of coatings formed at 560 °C. Surf. Coat. Technol. 89(1–2), 132–142 (1997). https://doi.org/10.1016/S0257-8972(96)02941-6
Český normalizační institut: Nelegovaná ocel obvyklých vlastností vhodná ke svařování pro ocelové konstrukce (1994). (in Czech)
Eriksson, H., Hirnová, A.: Příručka žárového zinkování, 3rd edn. Asociace českých a slovenských zinkoven (2023). (in Czech)
Harazimová, K.: Ověření vlastností žárově pokovených vzorků (Verification of the properties of hot-dip plated samples) [Diplomová práce, České vysoké učení technické v Praze, Fakulta strojní, Ústav strojírenské technologie] (2023). https://dspace.cvut.cz/handle/10467/111352. (in Czech)
Měření drsnosti a nový drsnoměr: Technický týdeník (26), 13 (2003). (in Czech)
Kreislová, K.: Přehled metod měření tloušťky povlaků. Český normalizační institute (2008). (in Czech)
International Organization for Standardization: Methods for corrosion testing of metallic and other inorganic coatings on metallic substrates (1999)
International Organization for Standardization: Hot dip galvanized coatings on fabricated iron and steel articles (2022)
Kuklík, V., Kudláček, J.: Žárové zinkování. Asociace českých a slovenských zinkoven (2014). (in Czech)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2024 The Author(s), under exclusive license to Springer Nature Switzerland AG
About this paper
Cite this paper
Černý, D., Kuchař, J., Kania, H., Saternus, M. (2024). Verification of the Properties of Zinc Hot-Dip Galvanized Steel Samples. In: Gapiński, B., Ciszak, O., Ivanov, V., Machado, J.M. (eds) Advances in Manufacturing IV. MANUFACTURING 2024. Lecture Notes in Mechanical Engineering. Springer, Cham. https://doi.org/10.1007/978-3-031-56463-5_15
Download citation
DOI: https://doi.org/10.1007/978-3-031-56463-5_15
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-031-56465-9
Online ISBN: 978-3-031-56463-5
eBook Packages: EngineeringEngineering (R0)