Abstract
In addition to the generation of industrial waste, especially in the ornamental stones sector, another problem caused by modernization which affects urban lifestyle and the environment is soil sealing. The loss of permeability leads in the surface to an increase in water runoff leading to floods, and through channels, to the transferring of these volumes to nearby water bodies leading to problems like silting up of rivers. The present work has the objective of producing permeable pavement using gravel waste in an epoxy resin matrix, and analyzing the feasibility of its use with the characterization of its properties. The slabs of permeable artificial stone were developed with the granite gravel waste having a granulometry between 10 and 20 mm. The characterization was made for porosity evaluation through water immersion, determination of the permeability coefficient and mechanical property. The results were of an (11 ± 1.7)% void ratio of the artificial stone, which indicates low porosity, and with a permeability coefficient of 2 mm/s the material can be utilized as a permeable pavement. The maximum flexural strength value of 4.26 ± 0.08 MPa, above the 2 MPa determined by the standard minimum, this parameter shows that this permeable pavement made with artificial stone has potential to be applied as tiling.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Araújo DC, Silva PO, Curi WF, Cabral JJSP (2017) Multicriteria analysis applied to the management of urban pluvial waters. Braz J Water Resour 22:1–11
Costa J, Barbassa LL (2006) Design parameters for microreservoirs, permeable pavements and urban flood forecasting. Sanit Environ Eng 11(1):46–54
Barreto LSS, Ghisi E, Godoi C, Oliveira FJS (2020) Reuse of ornamental rock solid waste for stabilization and solidification of galvanic solid waste: optimization for sustainable waste management strategy. J Clean Prod. https://doi.org/10.1016/j.jclepro.2020.122996
Bahiense AV, Alexandre J, Xavier GC, Azevedo ARG, Monteiro SN (2021) Dosage of interlocking paving with ornamental rock waste: an experimental design approach, particle packing and polluting potential. Case Stud Constr Mater. https://doi.org/10.1016/j.cscm.2021.e00596
Faut L, Soyeur F, Haezendonck E, Dooms M, Langen PW (2023) Ensuring circular strategy implementation: the development of circular economy indicators for ports. Marit Transp Res
Alfaia RGSM, Costa AM, Campos JC (2017) Municipal solid waste in Brazil: a review. Waste Manag Res 35(12):1195–1209. https://doi.org/10.1177/0734242X17735375
Zhu J, Ren ZJ (2023) The evolution of research in resources, conservation & recycling revealed by Word2vec-enhanced data mining. Resour Conserv Recycl. https://doi.org/10.1016/j.resconrec.2023.106876
Soares LBFS, Barraqui NSG, Gomes TC (2022) Principles of circular economy for the use of solid waste from ornamental rocks in the development of draining floors. South Am Dev Soc J 8(22):286
Muthukumar S, Saravanan AJ, Raman A, Sundaram MS, Angamuthu SS (2021) Investigation on the mechanical properties of eco-friendly pervious concrete. Mater Today Proc 46(Part 10):4909–4914. https://doi.org/10.1016/j.matpr.2020.10.333
Ferguson BK (2005) Porous pavements. In: Integrative studies in water management and land development. CRC Press, Boca Raton
Sansalone JJ, Xuheng K, Ranieri V (2008) Permeable pavement as a hydraulic and filtration interface for urban drainage. J Irrig Drain Eng ASCE 134:666–674. https://doi.org/10.1061/(ASCE)0733-9437(2008)134:5(666)
Rahangdale S, Maran S, Lakhmanil S, Gidde M (2017) Study of pervious concrete. Int Res J Eng Technol 04(06):2563–2566
Modani PO, Vyawahare MR (2013) Utilization of bagasse ash as a partial replacement of fine aggregate in concrete. Procedia Eng 51:25–29. https://doi.org/10.1016/j.proeng.2013.01.007
Parra GG, Teixeira BA (2015) Permeability analysis and permeable pavement installation methods contained in scientific articles and technical catalogues. Natl Mag City Manage 3(15):142–157
Muthukumar S, Saravanan AJ, Raman A, Sundaram MS, Angamuthu SS (2021) Investigation on the mechanical properties of eco-friendly pervious concrete. Mater Today Proc 46:4909–4914
ABNT Brazilian Association of Technical Standards. NBR 9778 (2009) Water absorption by void index. Rio de Janeiro
ABNT Brazilian Association of Technical Standards. NBR 16416 (2015) Permeable concrete pavements—requirements and procedures. Rio de Janeiro
American Society for Testing and Materials. ASTM 1701/C 1701 M-09 (2009) Standard test method for infiltration rate of in place pervious concrete. ASTM
ABNT Brazilian Association of Technical Standards. NBR 15805 (2015) Raised concrete slab floors—requirements and procedures. Rio de Janeiro
Neville AM (ed) (1997) Propriedades do Concreto. Editora Pini, São Paulo
Tennis PD, Leming ML, Akers DJ (2004) Pervious concrete pavements, EB302. Portland Cement Association, Skokie, Illinois
Batezini R (2013) Preliminary study of permeable concrete as a pavement coating for light vehicle areas. Dissertation, University of São Paulo
Faria AC, Santana JG, Barbosa JM, Donato M (2019) Draining concrete pavement: study of the granulometry that favors drainage and that affects the minimum resistance. In: 33° ANPET transport research and education congress, Balneário Camboriú, Santa Catarina, 10–15 Nov 2019
Caetano MO, Selbach JBO, Gomes LP (2016) Gravimetric composition of CDW for the finishing stage in horizontal residential works. Built Environ 16(2):51–67
Kia A, Wong HS, Cheeseman CR (2017) Clogging in permeable concrete: a review. J Environ Manage 15(193):221–233. https://doi.org/10.1016/j.jenvman.2017.02.018
Bhutta MAR, Tsuruta K, Mirza J (2012) Evaluation of high-performance porous concrete properties. Constr Build Mater 31:67–73. https://doi.org/10.1016/j.conbuildmat.2011.12.024
Ibrahim A, Mahmoud E, Yamin M, Patibandla VL (2014) Experimental study on Portland cement pervious concrete mechanical and hydrological properties. Constr Build Mater 50:524–529
Shin Y, Hyeong P, Jinha P, Cho H, Oh S, Chung S, Yang B (2022) Effect of polymer binder on the mechanical and microstructural properties of pervious pavement materials. Constr Build Mater. https://doi.org/10.1016/j.conbuildmat.2021.126209
Bittencourta SV, Magalhães MS, Tavares MEN (2021) Mechanical behavior and water infiltration of pervious concrete incorporating recycled asphalt pavement aggregate. Case Stud Constr Mater. https://doi.org/10.1016/j.cscm.2020.e00473
Acknowledgements
The authors acknowledge UENF for the physical space and the funding agencies FAPERJ, CAPES, and CNPq for supporting this research.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2024 The Minerals, Metals & Materials Society
About this paper
Cite this paper
Miranda, R.B., Carvalho, E.A.S., de Azevedo, A.R.G., Monteiro, S.N., Vieira, C.M.F. (2024). Production and Characterization of Artificial Stone for the Making of Permeable Pavement. In: Peng, Z., et al. Characterization of Minerals, Metals, and Materials 2024. TMS 2024. The Minerals, Metals & Materials Series. Springer, Cham. https://doi.org/10.1007/978-3-031-50304-7_62
Download citation
DOI: https://doi.org/10.1007/978-3-031-50304-7_62
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-031-50303-0
Online ISBN: 978-3-031-50304-7
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)