Abstract
Sintering-blast furnace process is one of the most common methods for treating limonitic laterite. To reduce the negative impact of high aluminum content on the viscosity of blast furnace slag, adjusting the MgO/Al2O3 ratio of sinter is simple and effective. However, the effect of MgO/Al2O3 on the sintering process of limonitic laterite is still not clear. In this study, the effect of MgO/Al2O3 ratio on the output and quality indexes, phase compositions, and liquid phase content of sinter was investigated detailly. The results indicated that within the range of MgO/Al2O3 of 0.1–0.4, the output and quality indexes of the limonitic laterite sinter showed minimal fluctuations. While the value exceeded 0.4, the liquid phase content in the sinter significantly decreased, leading to a reduction of sinter strength. The MgO content in the liquid phase approached saturation after 0.4 MgO/Al2O3, further increasing the ratio would cause MgO to accumulate in spinel.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Luo J, Li G, Rao M, Peng Z, Liang G, Jiang T, Guo X (2020) Control of slag formation in the electric furnace smelting of ferronickel for an energy-saving production. J Clean Prod 287:125082. https://doi.org/10.1016/j.jclepro.2020.125082
Uddin MH, Khajavi LT (2020) The effect of sulfur in rotary kiln fuels on nickel laterite calcination. Miner Eng 157:106563. https://doi.org/10.1016/j.mineng.2020.106563
Hang G, Xue Z, Wu Y (2020) Preparation of high-grade ferronickel from low-grade nickel laterite by self-reduction and selective oxidation with CO2–CO gas. Miner Eng 151:106318. https://doi.org/10.1016/j.mineng.2020.106318
Chen J, Jak E, Hayes PC (2019) Investigation of the reduction roasting of saprolite ores in the caron process: microstructure evolution and phase transformations. Miner Process Exir Metall 130:148–159. https://doi.org/10.1080/25726641.2019.1699361
Zhu D, Xue Y, Pan J, Yang C, Guo Z, Tian H, Liao H, Pan L, Huang X (2020) An investigation into the distinctive sintering performance and consolidation mechanism of limonitic laterite ore. Powder Technol 367:616–631. https://doi.org/10.1016/j.powtec.2020.03.066
Xue Y, Zhu D, Pan J, Guo Z, Yang C, Tian H, Duan X, Huang Q, Pan L, Huang X (2020) Effective utilization of limonitic nickel laterite via pressurized densification process and its relevant mechanism. Minerals 10(9):750. https://doi.org/10.3390/min10090750
Zhu D, Xue Y, Pan J, Yang C, Guo Z, Tian H, Wang X, Huan Q, Pan L, Huang X (2020) Co-benefits of CO2 emission reduction and sintering performance improvement of limonitic laterite via hot exhaust-gas recirculation sintering. Powder Technol 373:727–740. https://doi.org/10.1016/j.powtec.2020.07.018
Wang Z, Zhang J, Zuo H, Wang R, Huang K, Ban Y (2013) Influence of MgO/Al2O3 ratio on sinter mineral composition and metallurgical properties. Sinter Pellet 38(5):1–7. https://doi.org/10.13403/j.sjqt.2013.05.002
Hu C, Yan L, Zhang G, Zhao K, Shi X (2018) Effect of MgO/Al2O3 on microscopic structure and micro-hardness of silico-ferrite of calcium and aluminum (SFCA). Sinter Pellet 43(2):14–19. https://doi.org/10.13403/j.sjqt.2018.02.019
Fan X, Zhao Y, Ji Z, Li H, Gan M, Zhou H, Chen X, Huang X (2021) New understanding about the relationship between surface ignition and low-carbon iron ore sintering performance. Process Saf Environ 146:267–275. https://doi.org/10.1016/j.psep.2020.09.004
Wong G, Fan X, Gan M, Ji Z, Ye H, Zhou Z, Wang Z (2020) Resource utilization of municipal solid waste incineration fly ash in iron ore sintering process: a novel thermal treatment. J Clean Prod 263:121400. https://doi.org/10.1016/j.jclepro.2020.121400
Chun T, Long H, Di Z, Zhang X, Wu X, Qian L (2017) Novel technology of reducing SO2 emission in the iron ore sintering. Process Saf Environ Prot 105:297–302. https://doi.org/10.1016/j.psep.2016.11.012
Liu Z, Cheng Q, Li K, Wang Y, Zhang J (2020) The interaction of nanoparticulate Fe2O3 in the sintering process: a molecular dynamics simulation. Powder Technol 367:97–104. https://doi.org/10.1016/j.powtec.2020.03.043
Zhang Y, Liu B, You Z, Su Z, Luo W, Li G, Jiang T (2016) Consolidation behavior of high-Fe manganese ore sinter with natural basicity. Miner Process Exir Metall Rev 37:333–341. https://doi.org/10.1080/08827508.2016.1218870
Tu Y, Zhang Y, Su Z, Jiang T (2022) Mineralization mechanism of limonitic laterite sinter under different fuel dosage: effect of FeO. Powder Technol 398:117064. https://doi.org/10.1016/j.powtec.2021.117064
Acknowledgements
The authors would express their sincere thanks to National Natural Science Foundation of China (Number U1960114), The Science and Technology Innovation Program of Hunan Province (2023RC1025), and Xuchang Talent Plan (Number 2021-178).
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2024 The Minerals, Metals & Materials Society
About this paper
Cite this paper
Tu, Y., Zhang, Y., Su, Z. (2024). Assessing MgO/Al2O3 Effect on Limonitic Laterite Sintering Process. In: Peng, Z., et al. Characterization of Minerals, Metals, and Materials 2024. TMS 2024. The Minerals, Metals & Materials Series. Springer, Cham. https://doi.org/10.1007/978-3-031-50304-7_11
Download citation
DOI: https://doi.org/10.1007/978-3-031-50304-7_11
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-031-50303-0
Online ISBN: 978-3-031-50304-7
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)