Abstract
Technological advances increasingly result in situations when simplest dynamic models with rigid links cannot be used and there is need for more complex models that consider the elasticity of links. This is caused by more intensive technological processes and higher operating speeds of machines, which leads to a growing level of vibrations. The motion equations of a machine unit include the motion equation of the mechanical system and the characteristics of the motor. Ideal motor characteristics can be used at the early stages of machine designing, while a more accurate dynamic analysis requires consideration of the dependencies of the law of motion on the load, reflected by static and dynamic properties. In machine designing it is essential to reduce dynamic errors caused by elastic vibrations of the mechanisms and dynamic properties of the motor in steady-state and transient modes of operation. This problem is particularly important when new high-performance machines and, above all, industrial robots, positioning platforms, etc. are created.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Kolovsky, M.Z.: Dynamics of machines L.: Mechanical Engineering, p. 263 (rus.) (1989)
Wolfson, I.: Dynamics of cyclic machines, p. 390. Fundamentals of Engineering Mechanics. Springer Verlag, Series (2015)
Kolovsky, M.Z., Evgrafov, A.N., Semenov Yu, A., Sloush, A.V.: Advanced theory of mechanisms and machines. Springer – Verlag Berlin Heidelberg New York, p. 394 (2000)
Uicker, J.J., Pennock, G.R., Shigley, J.E.: Theory of machines and mechanisms. Oxford University Press, p. 832 (2010)
Dresig, H., Holzweisig, F.: Dynamics of cars, p. 554. Springer- Verlag, Berlin- Heidelberg (2010)
Beitelschmitt, M., Dresig, H.: Machine dynamics. A Aufgaben and Beispile. – Berlin, Heidelberg: Springer, p. 407 (2015)
Harris, K.M., Krede, K.E.: Handbook of Shocks and Vibrations, 6. Edition – New York: McGraw-Hill Book Company (2010)
Semenov Yu, A., Semenova, N.S.: Theory of mechanisms and machines in examples and problems Part 11: Publishing House of the Polytechnic University, p. 284 (rus.) (2015)
Dresig, H.: Schwingungen mechanischer Antriebssysteme. – 2. Aufl. – Berlin; Heidelberg: Springer-Verlag, International Review of Mechanical Engineering (2005)
Semenov Yu, A., Semenova, N.S., Egorova, O.V.: Dynamic mesh taking into account the time-varying rigidity of the gear mesh. I.RE.M.E., 12(9), 736–741 (2018)
Semenov Yu, A., Semenova, N.S.: Determination of dynamic errors in machines with elastic links. Springer, pp. 163–174 (2019)
Evgrafov, A.N., Karazin, V.I., Petrov, G.N.: Analysis of the self-braking effect of linkage mechanisms. Lecture Notes in Mechanical Engineering, pp. 119–127 (2019)
Norton, R.L.: Design of machinery, 4 ed, McGraw Hill, p. 860 (2007)
Mabie, H.H., Reinholz, C.F.: Mechanisms and dynamics of machinery. John Wiley and Sons, p. 644 (2011)
Semenov Yu, A.: Dynamics of machines. Publishing house house of the Polytechnic University, p. 318 (rus.) (2010)
Evgrafov, A.N., Karazin, V.I., Khisamov, A.V.: Research of high-level control system for centrifuge engine. Intern. Rev. Mech. Eng. 12(5), 400–404 (2018)
Semenov Yu, A., Semenova, N.S.: Dynamic errors in machines with elastic links.: international review of mechanical engineering .Springer– Verlag Berlin, pp. 163–174 (2019)
Andrienko, P.A., Karazin, V.I., Kozlikin, D.P., Tereshin, V.A., Khisimov, A.V., Khlebosolov, I.O.: Research and modeling of the stand of alternating linear accelerations. Modern mech. Eng. Sci. Educ. No. 11, 59–70 (2022)
Evgrafov, A.N., Petrov, G.N., Tereshin, V.A.: The use of additional inputs of lever mechanisms when approaching special positions. Modern Mech. Eng. Sci. Educ. No. 11, 82–90 (2022)
Kolovsky, M.Z., Evgrafov, A.N.: On some directions of modernizing modernizing the TMM course. Theory Mechan. Mach. 1(1), 3–29 (2003)
Evgrafov, A.N., Petrov, G.N., Evgrafov, S.A.: Consideration of friction in linkage mechanisms. In: Evgrafov, A.N. (ed.), Advances in Mechanical Engineering. LNME, Springer, Cham., pp. 75–82 (2020)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2024 The Author(s), under exclusive license to Springer Nature Switzerland AG
About this paper
Cite this paper
Semenov, Y.A., Semenova, N.S. (2024). Influence of Dynamic Characteristic of Motor on Steady Motion of Machine. In: Evgrafov, A.N. (eds) Advances in Mechanical Engineering. MMESE 2023. Lecture Notes in Mechanical Engineering. Springer, Cham. https://doi.org/10.1007/978-3-031-48851-1_4
Download citation
DOI: https://doi.org/10.1007/978-3-031-48851-1_4
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-031-48850-4
Online ISBN: 978-3-031-48851-1
eBook Packages: EngineeringEngineering (R0)