Abstract
The engineering dependencies to calculate the theoretical stress concentration factor at a cruciform welded joint are analyzed. Based on the comparison of the dependences under consideration with the results of studies of cruciform welded joints by the finite element method, formulas that best determine the theoretical stress concentration factor are established.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Shimansky, Y.: Design of discontinuous connections of the ship hull. Sudpromgiz, Leningrad (1949)
Hartman, J., Leven, M.: Factors of stress concentration for the bending: case of fillets in flat bars and shafts with central enlarged section. Proceedings SESA. 9(1), 1–53 (1951)
Afanasiev, N.: Statistical theory of fatigue strength of metals. Publishing House of the Academy of Sciences of the Ukrainian SSR, Kyiv (1953)
Heywood, R.: Designing by photoelasticity. Charpman and Hall, London (1952)
Nishida, M.: Stress concentration. Morikita Publishing Co, Tokyo (1967)
Ohta, S., Eguchi, Y.: Fatique strength of arc-welded joints in 80 kg/mm2 hidh strength steel. J. Jap. Weld. Soc. 4, 19–28 (1974)
Kawai, S., Miyamoto, I., Shiono, T., Saikawa, S.: Effect of finishes of weld toe on fatique strength of welded high strength steels. Ibid. 9, 44–51 (1979)
Turmov, G.: Determination of the stress concentration factor in welded joints. Autom. Weld.. Weld. 10, 14–17 (1976)
Lawrence, F., Ho, N., Mazumdar, P.: Predicting the fatigue stress analysis of weldments. Annu. Rev. Mater. Sci.. Rev. Mater. Sci. 11, 401–425 (1981)
Ushirokawa, O., Nakayama, E.: Stress concentration factor at Welded Joints. Ishikawajima-Harima Eng. Rev. 23, 351–355 (1983)
Rainer, G.: Parameterstudien mit finiten Elementen, Berechnung der Bauteilfestigkeit von Schweißverbindungen unter äußeren Beanspruchungen. Konstruktion 37(2), 45–52 (1983)
Yung, J., Lawrence, F.: Analytical and graphical aids for the fatigue design of weldments. Fatigue Fract. Eng. Mater. Struct.Fract. Eng. Mater. Struct. 8(3), 223–241 (1985)
Karkhin, V., Kostylev, V., Stakanov, V.: Influence of geometric parameters of butt, tee and cross joints on the stress concentration factor. Autom. Weld.. Weld. 3, 6–11 (1988)
Tsuji, I.: Estimation of stress concentration factor at weld toe of non-load carrying fillet welded joints. Trans West Jpn Soc Naval Architects 80, 241–251 (1990)
Radaj, D., Zhang, S.: Mehrparametrige Strukturoptimierung hinsichtlich Spannungserhöhungen. Konstruktion 42, 89–292 (1990)
Radaj D, Zhang S.: Multiparameter design optimisation in respect of stress concentrations. In: Springer-Verlag (ed) engineering optimisation in design processes. pp. 181–189. Springer, Berlin (1991)
Anthes, R., Köttgen, V., Seeger, T.: Kerbformzahlen von Stumpfstößen und Doppel-T-Stößen. Schweissen und Schneiden. 45(12), 685–688 (1993)
Anthes, R., Köttgen, V., Seeger, T.: Einfluß der Nahtgeometrie auf die Dauerfestigkeit von Stumpf- und DoppelT-Stößen. Schweissen und Schneiden. 46(9), 433–436 (1994)
Manzhula, K.: Theory and methods for calculating the fatigue resistance of metal structures of hoisting machines: dis. Dr. tech. Sciences. St. Petersburg (1997)
Molski, K., Tarasiuk, P., Glinka, G.: Stress concentration at cruciform welded joints under axial and bending loading modes. Welding in the World 64, 1867–1876 (2020)
Oswald, M., Mayr, C., Rother, K.: Determination of notch factors for welded cruciform joints based on numerical analysis and metamodeling. Welding in the World. 63, 1339–1354 (2019)
Wang, Y., Luo, Y., Tsutsumi, S.: Parametric formula for stress concentration factor of filletweld joints with spline bead profile. Materials 13, 46–39 (2020)
Manzhula, K., Shlepetinskiy, A.: Calculated dependences for determining theoretical stress concentration factors in a welded T-joint. In: Advances in Mechanical Engineering. Selected Contributions from the Conference “Modern Engineering: Science and Education”, Saint Petersburg, Russia, June 2022. pp. 57–69. Springer, Cham (2023)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2024 The Author(s), under exclusive license to Springer Nature Switzerland AG
About this paper
Cite this paper
Manzhula, K.P., Shlepetinskiy, A.Y. (2024). Theoretical Stress Concentration Factors at a Cruciform Welded Joint. In: Evgrafov, A.N. (eds) Advances in Mechanical Engineering. MMESE 2023. Lecture Notes in Mechanical Engineering. Springer, Cham. https://doi.org/10.1007/978-3-031-48851-1_15
Download citation
DOI: https://doi.org/10.1007/978-3-031-48851-1_15
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-031-48850-4
Online ISBN: 978-3-031-48851-1
eBook Packages: EngineeringEngineering (R0)