Abstract
As the main structure of launch vehicles, the forming of cylindrical parts with reinforcing ribs still follows the manufacture mode of milling, rolling and welding in the middle of last century, which has the problems of long manufacturing cycle and low material utilization. In this paper, an innovative rolling method is proposed for manufacturing cylindrical parts with external cross ribs of high performance, high efficiency and low cost. Firstly, the forming principles of the rolling method are presented. Secondly, the experimental samples of cylindrical parts are formed by rolling method. Finally, the forming defects are analyzed and optimized, and the ideal cylindrical parts with external cross ribs are formed, which proves the feasibility of the rolling method.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Yang, H.: Creep Age Forming Investigation on Aluminum Alloy 2219 and Related Studies. Imperial College London, London (2016)
Wong, C., Dean, T., Lin, J.: A review of spinning, shear forming and flow forming processes. Int. J. Mach. Tools Manuf 43(14), 1419–1435 (2003)
Xia, Q., Xiao, G., Long, H., et al.: A review of process advancement of novel metal spinning. Int. J. Mach. Tools Manuf 85, 100–121 (2014)
Wagner, J., Domack, M., Hoffman, E.: Recent advances in near-net-shape fabrication of al-li alloy 2195 for launch vehicles, National Aeronautics and Space Administration (2017)
Alves, L., Gameiro, J., Silva, C., Martins, P.: Sheet-bulk forming of tubes for joining applications. J. Mater. Process. Technol. 240, 154–161 (2017)
Han, X., Hua, L., Peng, L., Feng, W.: An innovative radial envelope forming method for manufacturing thin-walled cylindrical ring with inner web ribs. J. Mater. Process. Technol. 286, 116836 (2020)
Tian, D., Han, X., Hua, L., Huang, B., Yang, S.: A novel process for axial closed extrusion of ring part with mesh-like ribs. Int. J. Mech. Sci. 165, 105186 (2020)
Xu, H., Li, M., Li, L.: Power spinning study of thin-walled 5a06 aluminum alloy cylinder with longitudinal and hoop inner ribs for manufacturing engineering. Adv. Mater. Res. 583, 301–305 (2012)
Zeng, X., Fan, X., Li, H., Li, S.: Flow forming process of thin-walled tubular parts with cross inner ribs. Proc. Manufact. 15, 1239–1246 (2018)
Zeng, X., et al.: Die filling mechanism in flow forming of thin-walled tubular parts with cross inner ribs. J. Manuf. Process. 58, 832–844 (2020)
Cui, J., Zhao, Y., Li, X., Yu, Z., Li, S.: Research on the influence of ultrasonic on the inner rib’s surface morphology of ribbed cylindrical parts in flow spinning process. J. Manuf. Process. 67, 376–387 (2021)
Acknowledgments
The authors would like to gratefully acknowledge the support of the National Key Research and Development Program of China (2020YFA0711102).
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2024 The Author(s), under exclusive license to Springer Nature Switzerland AG
About this paper
Cite this paper
Chen, X., Yu, Z., Zhao, Y., Zhu, Z. (2024). Rolling of Cylindrical Parts with External Cross Ribs. In: Mocellin, K., Bouchard, PO., Bigot, R., Balan, T. (eds) Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of Plasticity. ICTP 2023. Lecture Notes in Mechanical Engineering. Springer, Cham. https://doi.org/10.1007/978-3-031-41023-9_15
Download citation
DOI: https://doi.org/10.1007/978-3-031-41023-9_15
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-031-41022-2
Online ISBN: 978-3-031-41023-9
eBook Packages: EngineeringEngineering (R0)