Abstract
Natural hydraulic lime (NHL) is considered to be more environmentally friendly than Portland cement (PC) since it has a lower calcination temperature and the ability of carbon dioxide (CO2) sequestration during the hardening process. Both factors contribute to the fact that NHL has higher environmental credentials. Both of these characteristics contribute to the production of the NHL. On the other hand, NHL is more susceptible to the effects of climate throughout the processes of setting and hardening, which is especially true in environments with high relative humidity. This study evaluated the influence of high temperature and humidity conditions on NHL mortars. Three settings were studied to examine mortar’s primary chemical and physical properties. According to the findings, mortars that were allowed to cure at higher temperatures achieved their initial strength more quickly. However, this strength gradually reduced over time, which put the mortar’s quality at risk. This finding also helps to show the challenges associated with using NHL materials in their current form in high-temperature and high-humidity settings, such as tropical regions.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Allen G, Allen J, Elton N, Farey M, Holmes S, Livesey P, Radonjic M (2003) Hydraulic lime mortar for stone. Donhead Publishing Ltd., Dorset, UK, Brick and Block Masonry
Apostolopoulou M, Asteris PG, Armaghani DJ, Douvika MG, Lourenço PB, Cavaleri L, Bakolas A, Moropoulou A (2020) Mapping and holistic design of natural hydraulic lime mortars. Cem Concr Res 136:106167–106187
Ball RJ, El-Turki A, Allen GC (2009) Influence of carbonation on the load dependent deformation of hydraulic lime mortars. In: Walker P et al (eds) 11th international conference on non-conventional materials and technologies (NOCMAT 2009), Bath, UK
Banfill PFG, Forster AM (1999) A relationship between hyraulicity and permeability of hydraulic lime’. In: Bartos P, Groot C, Hughes JJ (eds) Proceedings PRO012: international RILEM workshop on historic mortars: characteristics and tests Paisley, Scotland, Edinburgh. RILEM, 11, United Kingdom
Benachour Y, Davy CA, Skoczylas F, Houari H (2009) Effect of high calcite filler addition upon micro-structure and freeze/thaw resistance of a mortar. In: Tanabe T, Sakata K, Mihashi, H, Sato R, Maekawa K, Nakamura H (eds) Creep, shrinkage and durability mechanic of concrete and concrete structure. Taylor & Francis Group, London, UK
Cizer O, Van Balen K, Van Gemert D, Elsen J (2007) Carbonation and hydrations of mortars with calcium hydroxide and calcium silicates binders. Taylor & Francis Group, Coventry, UK
Cizer O, Van Balen K, Van Gemert D (2008) Blended lime-cement mortars for conservation purposes: microstructure and strength development structural analysis and historic construction. Taylor & Francis Group, London
de Oliveira VC, Godinho JP, Grings KJO, de Oliveira RA, dos Santos EGF (2021) Performance as for water tightness of rendering mortars using admixtures. Int J Build Pathol Adapt 6(1):1–9
de Oliveira LAP, de Castro Gomes JP, Gonilho Pereira CN (2006) Study of sorptivity of self-compacting concrete with mineral additives. J Civil Eng Manag 12(3): 215–220. https://doi.org/10.1080/13923730.2006.9636395
Dias WPS (2000) Reduction of concrete sorptivity with age through carbonation. Cem Concr Res 30(8)
Ezziane K, Bougara A, Kadri A, Khelafi A, Kadri E (2007) Compressive strength of mortar containing natural pozzolan under various curing conditions. Cem Concr Compos 29(8):587–593
Forster AM, Szadurski EM, Banfill PFG (2014) Deterioration of natural hydraulic lime mortars, I: effects of chemically accelerated leaching on physical and mechanical properties of uncarbonated materials. Constr Build Mater 72:199–207
Hall C, Hoff WD (2012) Water transport in brick. Spon Press, Oxon, UK, Stone and Concrete
Hanley R, Pavia S (2008) A study of workability of natural hydraulic lime mortars and its influence on strength. Mater Struct 41(2):373–381
Holmes S, Wingate M (2002) Building with lime: a practical introduction. ITDK, London
Hughes JJ, Válek J (2003) Mortars in historic buildings: a review of the conservation, technical and scientific literature. Historic Scotland, Edinburgh
Imbabi MS, Carrigan C, McKenna S (2012) Trends and developments in green cement and concrete technology. Int J Sustain Built Environ 1(2):194–216
Jelle BP (2012) Accelerated climate ageing of building materials, components and structures in the laboratory. J Mater Sci 47(18):6475–6496
Kerr EA (2008) Damage mechanism and repairability of high strength concrete exposed to heat, Unpublished thesis. The University of Notre Dame
Lanas J, Alvarez-Galindo JI (2006) Masonry repair lime-based mortar: factors affecting the mechanical behaviours. Cem Concr Res 33(11):1867–1878
Lawrence RMH (2006) A study of carbonation in non-hydraulic lime mortars, unpublished thesis. The University of Bath
Lomas KJ, Porritt SM (2017) Overheating in buildings: lessons from research. Build Res Inf 45(1–2):1–18
Lottermoser BG (2010) Mine wastes: characterization. Springer-Verlag, Berlin, Treatment and Environmental Impacts
Mahasenan N, Smith S, Humphreys K (2003) The cement industry and global climate change: current and potential future cement industry CO2 emissions. In: Greenhouse gas control technologies-6th international conference, Pergamon
Materic V, Smedley SI (2011) High-temperature carbonation of Ca(OH)2. J Am Chem Soc 50(10):5927–5932
Mizzi B, Wang Y, Borg RP (2018) Effects of climate change on structures; analysis of carbonation-induced corrosion in reinforced concrete structures in Malta. IOP Conf Series Mater Sci Eng 442(1):12023–12038
Moropoulou A, Biscontin G, Bakolas A, Bisbikou K (1997) Technology and behaviour of rubble masonry mortars. Constr Build Mater 11(2):119–129
Oliver JE (ed) (2008) Encyclopedia of world climatology. Springer Science & Business Media
Prezant B, Weekes DM, Miller JD (eds) (2008) Recognition, evaluation, and control of indoor mold. AIHA Publishing, Virginia
Rasanen V, Penttala V (2004) The pH measurement of concrete and smoothing mortar using a concrete powder suspension. Cem Concr Res 34(5):813–820
Rasiah R, Ahmed A, Al-Amin AQ, Chenayah S (2017) Climate change mitigation: comparative assessment of Malaysian and ASEAN scenarios. Environ Sci Pollut Res 24(3):2632–2642
Rathore PKS, Shukla SK, Gupta NK (2020) Yearly analysis of peak temperature, thermal amplitude, time lag and decrement factor of a building envelope in tropical climate. J Build Eng 31:101459–101474
Razali N, Azizan MA, Pa’ee KF, Razali N, Jumadi N (2020) Preliminary studies on calcinated chicken eggshells as fine aggregates replacement in conventional concrete. Mater Today Proc 31:354–359
Schroder L, Ogletree V (2010) Adobe homes for all climates: simple, affordable, and earthquake-resistant natural building techniques. Chelsea Green Publishing, Vermont
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2023 The Author(s), under exclusive license to Springer Nature Switzerland AG
About this chapter
Cite this chapter
Razali, N., Forster, A.M., Jumadi, N., Razali, N. (2023). Analysis of the Natural Hydraulic Lime Mortar's Properties Under Accelerated Tropical Climate Conditions. In: Ismail, A., Zulkipli, F.N., Yaakup, S., Öchsner, A. (eds) Materials and Technologies for Future Advancement. Advanced Structured Materials, vol 193. Springer, Cham. https://doi.org/10.1007/978-3-031-38993-1_1
Download citation
DOI: https://doi.org/10.1007/978-3-031-38993-1_1
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-031-38992-4
Online ISBN: 978-3-031-38993-1
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)