Skip to main content
SpringerLink
Log in

Hydrodynamic Characteristics of Pumping Bulk Materials Using Vortex Chamber Ejectors

  • Conference paper
  • First Online:
Advances in Design, Simulation and Manufacturing VI (DSMIE 2023)

Part of the book series: Lecture Notes in Mechanical Engineering ((LNME))

Included in the following conference series:

  • 184 Accesses

Abstract

Compressors of various types are used as blowers for pneumatic transport, and all of them, except jet-type devices, have low reliability and durability. Jet pneumatic conveying installations cannot completely use due to the very low efficiency of jet ejectors and the low efficiency of energy transfer to solid particles. On the other hand, vortex chamber superchargers have better characteristics of the granular medium in comparison with direct-flow jet ejectors. When implementing the working process without a drainage channel, the pressure at the device outlet decreases with an increase in the mixed flow rate. The characteristics of the vortex chamber ejector for pumping granular medium without a drainage channel have been determined. The mathematical model adequacy was carried out based on a comparison of the flow integral characteristics: mass flow rates and pressures in all channels for gas and mass flow rates of bulk material in the inlet and outlet channels. The ejector characteristics were studied based on solving the Reynolds-averaged Navier-Stokes equations using the SST turbulence model. The flow rate of solid particles at the device outlet correlates with the diameter of the solid particles. The rational size of solid particles has been determined to ensure the maximum flow rate of the granular medium, which is ensured by the minimum residence time of the solid particle in the vortex chamber.

This is a preview of subscription content, log in via an institution to check access.

Access this chapter

Log in via an institution
Chapter
USD 29.95
Price excludes VAT (USA)
  • Available as PDF
  • Read on any device
  • Instant download
  • Own it forever
eBook
USD 169.00
Price excludes VAT (USA)
  • Available as EPUB and PDF
  • Read on any device
  • Instant download
  • Own it forever
Softcover Book
USD 219.99
Price excludes VAT (USA)
  • Compact, lightweight edition
  • Dispatched in 3 to 5 business days
  • Free shipping worldwide - see info

Tax calculation will be finalised at checkout

Purchases are for personal use only

Institutional subscriptions

References

  1. Bakhshipour, A., Rahmanian-Koushkaki, H.: Pneumatic conveyors. In: Transporting Operations of Food Materials Within Food Factories, pp. 265−291. Woodhead Publishing (2023). https://doi.org/10.1016/B978-0-12-818585-8.00004-0

  2. Li, C., Bin, G., Li, J., Liu, Z.: Study on the erosive wear of the gas-solid flow of compressor blade in an aero-turboshaft engine based on the Finnie model. Tribol. Int. 163, 107197 (2021). https://doi.org/10.1016/j.triboint.2021.107197

    Article  Google Scholar 

  3. Panchenko, A., Voloshina, A., Luzan, P., Panchenko, I., Volkov, S.: Kinematics of motion of rotors of an orbital hydraulic machine. IOP Conf. Ser. Mater. Sci. Eng. 1021(1), 012045 (2021). https://doi.org/10.1088/1757-899X/1021/1/012045

    Article  Google Scholar 

  4. Voloshina, A., Panchenko, A., Titova, O., Pashchenko, V., Zasiadko, A.: Experimental studies of a throughput of the distribution systems of planetary hydraulic motors. IOP Conf. Ser. Mater. Sci. Eng. 1021(1), 012054 (2021). https://doi.org/10.1088/1757-899X/1021/1/012054

    Article  Google Scholar 

  5. Ji, Y., Liu, S., Gao, D., Zhao, J.: Particle abrasion of lifting elbow in dilute pneumatic conveying. Proc. Inst. Mech. Eng. Part J: J. Eng. Tribol. 235(3), 598–610 (2021). https://doi.org/10.1177/1350650120951293

    Article  Google Scholar 

  6. Li, C., Bin, G., Li, J., Yang, P., Wang, W.: Influence of inlet distortion on the wear of aero-compressor blades. Int. J. Mech. Sci. 230, 107551 (2022). https://doi.org/10.1016/j.ijmecsci.2022.107551

    Article  Google Scholar 

  7. Krol, O., Sokolov, V.: Modelling of spindle nodes for machining centers. J. Phys: Conf. Ser. 1084, 012007 (2018). https://doi.org/10.1088/1742-6596/1084/1/012007

    Article  Google Scholar 

  8. Madhav, S., Roy, M.: Failure analysis of compressor blades of aero-engine. J. Failure Anal. Preven. 1−15 (2022). https://doi.org/10.1007/s11668-022-01405-w

  9. Sharma, D., Patwardhan, A., Ranade, V.: Effect of turbulent dispersion on hydrodynamic characteristics in a liquid jet ejector. Energy 164, 10–20 (2018). https://doi.org/10.1016/j.energy.2018.08.171

    Article  Google Scholar 

  10. Rogovyi, A., Korohodskyi, V., Neskorozhenyi, A., Hrechka, I., Khovanskyi, S.: Reduction of granular material losses in a vortex chamber supercharger drainage channel. In: Ivanov, V., Pavlenko, I., Liaposhchenko, O., Machado, J., Edl, M. (eds.) Advances in Design, Simulation and Manufacturing V. DSMIE 2022. LNME, pp. 218−226. Springer, Cham (2022). https://doi.org/10.1007/978-3-031-06044-1_21

  11. Turick, V., Kochin, V., Kochina, M.: Examining the technique to control the structure of current in vortex chambers by wing vortex generators. Eastern Eur. J. Enterp. Technol. 1(5), 28–38 (2018). https://doi.org/10.15587/1729-4061.2018.121962

    Article  Google Scholar 

  12. Friso, D.: Mathematical modelling of the entrainment ratio of high performance supersonic industrial ejectors. Processes 10(1), 88 (2022). https://doi.org/10.3390/pr10010088

    Article  Google Scholar 

  13. Pavlenko, I., Ivanov, V., Gusak, O., Liaposhchenko, O., Sklabinskyi, V.: Parameter identification of technological equipment for ensuring the reliability of the vibration separation process. In: Knapcikova, L., Balog, M., Perakovic, D., Perisa, M. (eds.) 4th EAI International Conference on Management of Manufacturing Systems. EICC, pp. 261–272. Springer, Cham (2020). https://doi.org/10.1007/978-3-030-34272-2_24

    Chapter  Google Scholar 

  14. Krol, O., Sokolov, V.: Modeling of spindle node dynamics using the spectral analysis method. In: Ivanov, V., Trojanowska, J., Pavlenko, I., Zajac, J., Peraković, D. (eds.) DSMIE 2020. LNME, pp. 35–44. Springer, Cham (2020). https://doi.org/10.1007/978-3-030-50794-7_4

    Chapter  Google Scholar 

  15. Voloshina, A., Panchenko, A., Titova, O., Panchenko, I.: Changes in the dynamics of the output characteristics of mechatronic systems with planetary hydraulic motors. J. Phys: Conf. Ser. 1741(1), 012045 (2021). https://doi.org/10.1088/1742-6596/1741/1/012045

    Article  Google Scholar 

  16. Sokolov, V., Porkuian, O., Krol, O., Stepanova, O.: Design calculation of automatic rotary motion electrohydraulic drive for technological equipment. In: Ivanov, V., Trojanowska, J., Pavlenko, I., Zajac, J., Peraković, D. (eds.) DSMIE 2021. LNME, pp. 133–142. Springer, Cham (2021). https://doi.org/10.1007/978-3-030-77719-7_14

    Chapter  Google Scholar 

  17. Panchenko, A., Voloshina, A., Titova, O., Panchenko, I., Zasiadko, A.: The study of dynamic processes of mechatronic systems with planetary hydraulic motors. In: Tonkonogyi, V., et al. (eds.) InterPartner 2020. LNME, pp. 704–713. Springer, Cham (2021). https://doi.org/10.1007/978-3-030-68014-5_68

    Chapter  Google Scholar 

  18. Patlins, A., Hnatov, A., Arhun, S.C., Bogdan, D., Dzyubenko, O.: Development of an energy generating platform for converting kinetic energy into electrical energy using the kinematic synthesis of a three-stage multiplier. In: Transport Means-Proceedings of the International Conference, pp. 403−408 (2019)

    Google Scholar 

  19. Zaitsev, R.V., Kirichenko, M.V., Minakova, K.A., Khrypunov, G.S., Khrypunova, I.V., Prokopenko, D.S.: DC-DC converter for high-voltage power take-off system of solar station. In: 2019 IEEE 2nd Ukraine Conference on Electrical and Computer Engineering (UKRCON), pp. 1−6. IEEE (2019). https://doi.org/10.1109/UKRCON.2019.8879860

  20. Fesenko, A., Yevsiukova, F., Basova, Y., Ivanova, M., Ivanov, V.: Prospects of using hydrodynamic cavitation for enhancement of efficiency of fluid working medium preparation technologies. Periodica Polytechnica Mech. Eng. 62(4), 269–276 (2018). https://doi.org/10.3311/PPme.11877

    Article  Google Scholar 

  21. Liaposchenko, O., Pavlenko, I., Nastenko, O.: The model of crossed movement and gas-liquid flow interaction with captured liquid film in the inertial-filtering separation channels. Sep. Purif. Technol. 173, 240–243 (2017). https://doi.org/10.1016/j.seppur.2016.08.042

    Article  Google Scholar 

  22. Liaposhchenko, O.O., Sklabinskyi, V.I., Zavialov, V.L., Pavlenko, I.V., Nastenko, O.V., Demianenko, M.M.: Appliance of inertial gas-dynamic separation of gas-dispersion flows in the curvilinear convergent-divergent channels for compressor equipment reliability improvement. IOP Conf. Ser: Mater. Sci. Eng. 233(1), 012025 (2017). https://doi.org/10.1088/1757-899X/233/1/012025

    Article  Google Scholar 

  23. Tkachuk, M.M., Grabovskiy, A., Tkachuk, M.A., Zarubina, A., Lipeyko, A.: Analysis of elastic supports and rotor flexibility for dynamics of a cantilever impeller. J. Phys: Conf. Ser. 1741(1), 012043 (2021). https://doi.org/10.1088/1742-6596/1741/1/012043

    Article  Google Scholar 

  24. Voloshina, A., Panchenko, A., Titova, O., Milaeva, I., Pastushenko, A.: Prediction of changes in the output characteristics of the planetary hydraulic motor. In: Tonkonogyi, V., et al. (eds.) InterPartner 2020. LNME, pp. 744–754. Springer, Cham (2021). https://doi.org/10.1007/978-3-030-68014-5_72

    Chapter  Google Scholar 

  25. Andrenko, P., Rogovyi, A., Hrechka, I., Khovanskyi, S., Svynarenko, M.: Characteristics improvement of labyrinth screw pump using design modification in screw. J. Phys: Conf. Ser. 1741(1), 012024 (2021). https://doi.org/10.1088/1742-6596/1741/1/012024

    Article  Google Scholar 

  26. Kulikov, O., Ratushnyi, O., Moloshnyi, O., Ivchenko, O., Pavlenko, I.: Impact of the closed, semi-opened, and combined contra-rotating stages on volume loss characteristics. J. Eng. Sci. 9(1), D6–D13 (2022). https://doi.org/10.21272/jes.2022.9(1).d2

    Article  Google Scholar 

  27. Artyukhov, A., Artyukhova, N., Krmela, J., Krmelová, V.: Complex designing of granulation units with application of computer and software modeling: case “Vortex granulator.” IOP Conf. Ser. Mater. Sci. Eng. 776(1), 012016 (2020). https://doi.org/10.1088/1757-899X/776/1/012016

    Article  Google Scholar 

  28. Sommerfeld, M., Sgrott, O.L., Jr., Taborda, M.A., Koullapis, P., Bauer, K., Kassinos, S.: Analysis of flow field and turbulence predictions in a lung model applying RANS and implications for particle deposition. Eur. J. Pharm. Sci. 166, 105959 (2021). https://doi.org/10.1016/j.ejps.2021.105959

    Article  Google Scholar 

  29. Smirnov, P.E., Menter, F.R.: Sensitization of the SST turbulence model to rotation and curvature by applying the Spalart-Shur correction term. J. Turbomach. 131(4), 041010 (2009). https://doi.org/10.1115/1.3070573

    Article  Google Scholar 

  30. Islas, A., Rodríguez-Fernández, A., Betegón, C., Martínez-Pañeda, E., Pandal, A.: CFD simulations of turbulent dust dispersion in the 20 L vessel using OpenFOAM. Powder Technol. 397, 117033 (2022). https://doi.org/10.1016/j.powtec.2021.117033

    Article  Google Scholar 

  31. Pan, Y., Spijker, C., Raupenstrauch, H.: CFD modeling of particle dispersion behavior in the MIKE 3 apparatus. Alex. Eng. J. 61(12), 9305–9313 (2022). https://doi.org/10.1016/j.aej.2022.03.039

    Article  Google Scholar 

  32. Sokolov, V.: Diffusion of circular source in the channels of ventilation systems. In: Fujita, H., Nguyen, D.C., Vu, N.P., Banh, T.L., Puta, H.H. (eds.) ICERA 2018. LNNS, vol. 63, pp. 278–283. Springer, Cham (2019). https://doi.org/10.1007/978-3-030-04792-4_37

    Chapter  Google Scholar 

Download references

Author information

Authors and Affiliations

  1. National Technical University “Kharkiv Polytechnic Institute”, 2, Kyrpychova Street, Kharkiv, 61000, Ukraine

    Andrii Rogovyi & Olga Panamariova

  2. Kharkiv National Automobile and Highway University, 25, Yaroslava Mudrogo Street, Kharkiv, 61002, Ukraine

    Artem Neskorozhenyi

  3. Dmytro Motornyi, Tavria State Agrotechnological University, 18, B. Khmelnitsky Avenue, Melitopol, 72312, Ukraine

    Mykhailo Zoria

  4. Sumy State University, 2, Rymskogo-Korsakova Street, Sumy, 40007, Ukraine

    Serhii Khovanskyi

Authors
  1. Andrii Rogovyi
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Artem Neskorozhenyi
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Olga Panamariova
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Mykhailo Zoria
    View author publications

    You can also search for this author in PubMed Google Scholar

  5. Serhii Khovanskyi
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Andrii Rogovyi .

Editor information

Editors and Affiliations

  1. Sumy State University, Sumy, Ukraine

    Vitalii Ivanov

  2. Sumy State University, Sumy, Ukraine

    Ivan Pavlenko

  3. Sumy State University, Sumy, Ukraine

    Oleksandr Liaposhchenko

  4. University of Minho, Guimaräes, Portugal

    José Machado

  5. University of West Bohemia, Pilsen, Czech Republic

    Milan Edl

Rights and permissions

Reprints and permissions

Copyright information

© 2023 The Author(s), under exclusive license to Springer Nature Switzerland AG

About this paper

Check for updates. Verify currency and authenticity via CrossMark

Cite this paper

Rogovyi, A., Neskorozhenyi, A., Panamariova, O., Zoria, M., Khovanskyi, S. (2023). Hydrodynamic Characteristics of Pumping Bulk Materials Using Vortex Chamber Ejectors. In: Ivanov, V., Pavlenko, I., Liaposhchenko, O., Machado, J., Edl, M. (eds) Advances in Design, Simulation and Manufacturing VI. DSMIE 2023. Lecture Notes in Mechanical Engineering. Springer, Cham. https://doi.org/10.1007/978-3-031-32774-2_15

Download citation

  • DOI: https://doi.org/10.1007/978-3-031-32774-2_15

  • Published:

  • Publisher Name: Springer, Cham

  • Print ISBN: 978-3-031-32773-5

  • Online ISBN: 978-3-031-32774-2

  • eBook Packages: EngineeringEngineering (R0)

Publish with us

Policies and ethics

Search

Navigation