Abstract
Sodium-Metal Halide Batteries are a very promising alternative to the Lithium-ion ones for stationary applications, but their chemical complexity requires an accurate battery model to optimize their use. The electrical equivalent model of the battery is ordinarily used to this aim. The temperature dependency of the model parameters is studied in this work. Three characterization tests are carried-out at 270, 300, and 330 \({}^{\circ }\text {C}\) and analyzed to identify the model parameters. The parameters obtained are then compared with the literature showing that introducing in the model the temperature dependency can improve the accuracy of about six times.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Telaretti, E., Dusonchet, L.: Stationary battery systems in the main world markets: part 1: overview of the state-of-the-art. In: 2017 IEEE International Conference on Environment and Electrical Engineering and 2017 IEEE Industrial and Commercial Power Systems Europe (EEEIC/I &CPS Europe). Institute of Electrical and Electronics Engineers Inc. (2017)
Sessa, S.D., Crugnola, G., Todeschini, M., Zin, S., Benato, R.: Sodium nickel chloride battery steady-state regime model for stationary electrical energy storage. J. Energy Storage 6, 105–115 (2016)
Benato, R., et al.: Sodium nickel chloride battery technology for large-scale stationary storage in the high voltage network. J. Power Sources 293, 127–136 (2015)
Dustmann, C.H.: ZEBRA battery meets USABC goals. J. Power Sources 72(1), 27–31 (1998)
Benato, R., et al.: Sodium-nickel chloride (Na-NiCl\(_2\)) battery safety tests for stationary electrochemical energy storage. In: AEIT 2016 - International Annual Conference: Sustainable Development in the Mediterranean Area, Energy and ICT Networks of the Future (2016)
Boi, M., Battaglia, D., Salimbeni, A., Damiano, A.: A novel electrical model for iron doped-sodium metal halide batteries. IEEE Trans. Ind. Appl. 55(6), 6247–6255 (2019)
Sun, K., Shu, Q.: Overview of the types of battery models. In: Proceedings of the 30th Chinese Control Conference, CCC 2011, pp. 3644–3648 (2011)
Boi, M., Battaglia, D., Salimbeni, A., Damiano, A.: A non-linear electrical model for iron doped sodium metal halides batteries. In: 2018 IEEE Energy Conversion Congress and Exposition, ECCE 2018, pp. 2039–2046 (2018)
Di Rienzo, R., Simonte, G., Biagioni, I., Baronti, F., Roncella, R., Saletti, R.: Experimental investigation of an electrical model for sodium-nickel chloride batteries. Energies 13(10), 2652 (2020)
Simonte, G., Di Rienzo, R., Biagioni, I., Baronti, F., Roncella, R., Saletti, R.: Novel setup to extend the temperature characterization range of a sodium-metal halide battery. In: Saponara, S., De Gloria, A. (eds.) ApplePies 2021. LNEE, vol. 866, pp. 126–131. Springer, Cham (2022). https://doi.org/10.1007/978-3-030-95498-7_18
Morello, R., Di Rienzo, R., Roncella, R., Saletti, R., Baronti, F.: Hardware-in-the-loop platform for assessing battery state estimators in electric vehicles. IEEE Access 6, 68210–68220 (2018)
Acknowledgments
This research was partially funded by the University of Pisa Project PRA AUTENS, and supported by CrossLab project, funded by MIUR “Department of Excellence” program.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2023 The Author(s), under exclusive license to Springer Nature Switzerland AG
About this paper
Cite this paper
Simonte, G., Di Rienzo, R., Baronti, F., Roncella, R., Saletti, R. (2023). Improvement of Sodium-Metal Halide Battery Electrical Equivalent Model Including Temperature Dependency. In: Berta, R., De Gloria, A. (eds) Applications in Electronics Pervading Industry, Environment and Society. ApplePies 2022. Lecture Notes in Electrical Engineering, vol 1036. Springer, Cham. https://doi.org/10.1007/978-3-031-30333-3_48
Download citation
DOI: https://doi.org/10.1007/978-3-031-30333-3_48
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-031-30332-6
Online ISBN: 978-3-031-30333-3
eBook Packages: EngineeringEngineering (R0)