Abstract
One of mankind's main challenges is to study the benefits of the mining, extractive and manufacturing industries and the environmental impacts caused by their activity. The natural stones sector generates high amounts of sludge. This work aims to complement existing research to find sustainable solutions for this problem. For that purpose, a physical and chemical characterisation was made of four sludges from a Portuguese industry, generated in the sawing and primary cut of natural stones, known as LCA, LARM, FPEM and FPMC. The tests included grading analysis by sieving and sedimentation (X-ray attenuation method), determining density, the quality of fine particles (methylene blue test), and finally, quantitative chemical measurements by X-ray fluorescence. After that, the sludges were incorporated in mortars, replacing part of the cement (20% and 40%) in those mortars’ manufacture. To investigate this possibility, tests of resistance to compression and bending were carried out on the mortars at different ages. Based on the results, the objective of characterising the sludges was fulfilled, and it was concluded that it would be possible to incorporate them in mortars.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Cruz DFM, Lameiras RM, Barboza ASR, Lima LA (2003) Estudo das propriedades mecânicas de argamassas produzidas utilizando-se resíduo do corte de mármore e granito. In: VI Seminário Desenvolvimento Sustentável e a Reciclagem na Construção Civil Proceedings, p 14. São Paulo, Brasil
Dixo J (2018) Caracterização e aproveitamento das lamas geradas no corte primário de rocha ornamental. Instituto Superior de Engenharia do Porto, Porto (MSc Dissertation)
EN 13043:2002/AC (2004) Aggregates for bituminous mixtures and surface treatments for roads, airfields, and other trafficked areas
EN 196-1 (2016) Methods of testing cement—Part 1: Determination of strength
EN 933-9:2009+A1 (2013) Tests for geometrical properties of aggregates—Part 9: Assessment of fines—Methylene blue test
LNEC E 239 (1970) Solos. Análise Granulométrica por peneiração Húmida, Lisboa
LNEC E 64 (1979) Cimentos. Determinação da Massa Volúmica, Lisboa
Moura W, Gonçalves JP, Leite RS (2002) Utilização do resíduo de corte de mármore e granito em argamassas de revestimento e confeção de lajetas para piso. In Sitienbus, Feira De Santana, Brasil 26:49–61
Moura W, Lima MBL, Calmon JL, Moratti M, Souza FLS (2006) Utilização de resíduo de serragem de rochas ornamentais (RSRO) como substituição parcial do cimento na produção de blocos pré-moldados de argamassa. Proceedings Encontro Nacional De Tecnologia Do Ambiente Construído, Porto Alegre, Brasil 11:4217–4226
Tenório JJL, Lameiras RM, Lima LA (2005) Desempenho de argamassas produzidas com resíduos do beneficiamento de chapas de granito (RBCG). In: Proceedings VI Seminário Brasileiro de Tecnologia das argamassas e I International Symposium on Mortars Tecnology, Florianópolis, Brasil, pp 34–44
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2023 The Author(s), under exclusive license to Springer Nature Switzerland AG
About this paper
Cite this paper
Dixo, J., Spínola, S., Teixeira, A. (2023). Sludges from the Ornamental Rock Primary Cut: Mortar Incorporation Study. In: Chaminé, H.I., Fernandes, J.A. (eds) Advances in Geoengineering, Geotechnologies, and Geoenvironment for Earth Systems and Sustainable Georesources Management. Advances in Science, Technology & Innovation. Springer, Cham. https://doi.org/10.1007/978-3-031-25986-9_3
Download citation
DOI: https://doi.org/10.1007/978-3-031-25986-9_3
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-031-25985-2
Online ISBN: 978-3-031-25986-9
eBook Packages: Earth and Environmental ScienceEarth and Environmental Science (R0)