Skip to main content
SpringerLink
Log in

Selection, Dimensioning and Maintenance of Roller Bearings

  • Conference paper
  • First Online:
31st International Conference on Organization and Technology of Maintenance (OTO 2022) (OTO 2022)

Part of the book series: Lecture Notes in Networks and Systems ((LNNS,volume 592))

Included in the following conference series:

Abstract

Knowledge of issues related to the selection and dimensioning of roller bearings is extremely important in the work of engineers and designers, and from the point of view of the availability of available literature in this area, in general, is not at the level it should be. The main goal of this paper is to present the current procedures for the selection of roller bearings, to point out the most important factors to consider when choosing standard types of roller bearings, based on which their further selection can be significantly facilitated. Each type of bearing shows characteristic features, based on its design, which more or less make, or more or less correspond to the given conditions of application. Current methods and procedures for diagnosing the condition and maintenance of roller bearings as well as trends in their development will be presented. The paper deals with topics that show historical development of roller bearings, basic characteristics and types of roller bearings, selection and dimensioning of bearings, a diagnostic bearing condition inspection as a maintenance procedure is presented and described.

This is a preview of subscription content, log in via an institution to check access.

Access this chapter

Log in via an institution
Chapter
USD 29.95
Price excludes VAT (USA)
  • Available as PDF
  • Read on any device
  • Instant download
  • Own it forever
eBook
USD 149.00
Price excludes VAT (USA)
  • Available as EPUB and PDF
  • Read on any device
  • Instant download
  • Own it forever
Softcover Book
USD 199.99
Price excludes VAT (USA)
  • Compact, lightweight edition
  • Dispatched in 3 to 5 business days
  • Free shipping worldwide - see info

Tax calculation will be finalised at checkout

Purchases are for personal use only

Institutional subscriptions

References

  1. Mehmet, I., Dogan, G., Chitariu, D.F., Dumitraș, C., Negoescu, F.: Research on advances in roller bearing manufacturing. IOP Conf. Ser. Mater. Sci. Eng. 1182, 012045 (2021). https://doi.org/10.1088/1757-899X/1182/1/012045

  2. Janjic, N., Adamovic, Z., Nikolic, D., Asonja, A., Stojanovic, B.: Impact of diagnostics state model to the reliability of motor vehicles. J. Balkan Tribological Assoc. 21(2), 511–522 (2015)

    Google Scholar 

  3. Mikic, D., Desnica, E., Asonja, A., Stojanovic, B., Epifanic-Pajic, V.: Reliability analysis of ball bearing on the crankshaft of piston compressors. J. Balkan Tribological Assoc. 22(4-IV), 5060–5070 (2016)

    Google Scholar 

  4. Gligorić, R.: Mechanisms of Agricultural Machinery. University of Novi Sad, Faculty of Agriculture, Novi Sad, (2005)

    Google Scholar 

  5. Gülbahçe, E., Çelik, M.: Investigation of piezoelectric patches placement according to the strain intensity. Appl. Eng. Lett. 5(2), 46–49, (2020). https://doi.org/10.18485/aeletters.2020.5.2.2

  6. Ašonja, A., Adamović, Ž., Gligorić, R.: Development of roller bearings throughout history. In: XXXIII May Meeting of Maintainers “Teleautomation of Machines and Plants in Industry—Informatics and Ecology”. Vrnjačka Banja (2010)

    Google Scholar 

  7. Ašonja, A., Adamović, Ž., Gligorić, R.: Selection and Dimensioning of Roller Bearings. Duga knjiga, Sremski Karlovci (2010)

    Google Scholar 

  8. Timken Roller Bearing Patent Art 1898, No606,635, Art Print, by Ian Monk

    Google Scholar 

  9. Zarei, A., Farahani, S., Pradeep, S.A., Driscoll, J. Lukasiewicz R., Pilla S.: Design and manufacturing of roller bearing polymeric cages and development of a theoretical model for predicting the roller push-out force. Sci. Rep. 12, 1017 (2022). https://doi.org/10.1038/s41598-022-04959-9

  10. Patil, A.A., Desai, S.S., Patil, L.N., Patil, S.A.: Adopting artificial neural network for wear investigation of ball bearing materials under pure sliding condition. Appl. Eng. Lett. 7(2), 81–88 (2022). https://doi.org/10.18485/aeletters.2022.7.2.5

  11. Gligorić, R.: Machine elements. University of Novi Sad, Faculty of Agriculture, Novi Sad (2015)

    Google Scholar 

  12. Mikić, D., Desnica, E., Kiss, I., Mikić, V.: Reliability analysis of rolling ball bearings considering the bearing radial clearance and operating temperature. Adv. Eng. Lett. 1(1), 16–22 (2022). https://doi.org/10.46793/adeletters.2022.1.1.3

  13. Ašonja, A., Adamović, Ž.: Maintenance of Roller Bearings. Duga knjiga, Sremski Karlovci (2010)

    Google Scholar 

  14. FKL catalog, Feljton, Novi Sad (2002)

    Google Scholar 

  15. Lundberg, J., Parida, A., Söderholm, P.: Running temperature and mechanical stability of grease as maintenance parameters of railway bearings. Int. J. Autom. Comput. 7(2), 160–166 (2010). https://doi.org/10.1007/s11633-010-0160-1

    Article  Google Scholar 

  16. Adamović, Ž, Adamov, J.: Tribology and Lubrication. Society for Technical Diagnostics of Serbia, Smederevo (2006)

    Google Scholar 

Download references

Author information

Authors and Affiliations

  1. University of Novi Sad, Technical Faculty “Mihajlo Pupin”, Zrenjanin, Republic of Serbia

    Eleonora Desnica, Ljiljana Radovanović & Ivan Palinkaš

  2. Faculty of Economics and Engineering Management in Novi Sad, University Business Academy in Novi Sad, Novi Sad, Republic of Serbia

    Aleksandar Ašonja

  3. Faculty of Engineering Hunedoara, University Politehnica Timisoara, Timisoara, Romania

    Imre Kiss

Authors
  1. Eleonora Desnica
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Aleksandar Ašonja
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Ljiljana Radovanović
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Ivan Palinkaš
    View author publications

    You can also search for this author in PubMed Google Scholar

  5. Imre Kiss
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Eleonora Desnica .

Editor information

Editors and Affiliations

  1. Faculty of Electrical Engineering, Computer Science and Information Technology, Josip Juraj Strossmayer University of Osijek, Osijek, Croatia

    Damir Blažević

  2. Faculty of Civil Engineering, University of Sarajevo, Sarajevo, Bosnia and Herzegovina

    Naida Ademović

  3. Faculty of Electrical Engineering, Computer Science and Information Technology, Josip Juraj Strossmayer University of Osijek, Osijek, Croatia

    Tomislav Barić

  4. Faculty of Mechanical Engineering, University of Slavonski Brod, Slavonski Brod, Croatia

    Josip Cumin

  5. Technical Faculty “Mihajlo Pupin”, University of Novi Sad, Zrenjanin, Serbia

    Eleonora Desnica

Rights and permissions

Reprints and permissions

Copyright information

© 2023 The Author(s), under exclusive license to Springer Nature Switzerland AG

About this paper

Check for updates. Verify currency and authenticity via CrossMark

Cite this paper

Desnica, E., Ašonja, A., Radovanović, L., Palinkaš, I., Kiss, I. (2023). Selection, Dimensioning and Maintenance of Roller Bearings. In: Blažević, D., Ademović, N., Barić, T., Cumin, J., Desnica, E. (eds) 31st International Conference on Organization and Technology of Maintenance (OTO 2022). OTO 2022. Lecture Notes in Networks and Systems, vol 592. Springer, Cham. https://doi.org/10.1007/978-3-031-21429-5_12

Download citation

  • DOI: https://doi.org/10.1007/978-3-031-21429-5_12

  • Published:

  • Publisher Name: Springer, Cham

  • Print ISBN: 978-3-031-21428-8

  • Online ISBN: 978-3-031-21429-5

  • eBook Packages: EngineeringEngineering (R0)

Publish with us

Policies and ethics

Search

Navigation