Abstract
Non-structural elements such as electrical cabinets play a key role in determining the seismic performance of buildings. Seismic qualification shake table testing of non-structural elements is a relatively simple way to evaluate their expected seismic performance. This paper presents a shake table testing campaign performed on several electrical cabinet specimens using the 6DLAB laboratories at the EUCENTRE Foundation located in Pavia, Italy. These shake table tests were performed as part of the research project Creazione di un Ambiente Domestico Sicuro (CADS). The physical properties of all the tested electrical cabinet archetypes varied considerably including: base-mounted electrical cabinets, wall-mounted electrical cabinets, electrical cabinets with different attachment strengths, and electrical cabinets with different framing structure strengths. The shake table tests were carried out using two seismic testing protocols, one of which is commonly used for the seismic qualification of non-structural elements, whereas the second one was proposed within the scope of the CADS Project. The performance of selected electrical cabinet archetypes during the shake table tests are presented and discussed in this paper.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Dhakal, R.P.: Damage to non-structural components and contents in 2010 Darfield earthquake. Bull. N. Z. Soc. Earthq. Eng. 43(4), 404–411 (2010)
Miranda, E., Mosqueda, G., Retamales, R., Pekcan, G.: Performance of nonstructural components during the 27 February 2010 Chile earthquake. Earthq. Spectra 28(S1), S453–S471 (2012)
Perrone, D., Calvi, P.M., Nascimbene, R., Fischer, E., Magliulo, G.: Seismic performance and damage observation of non-structural elements during the 2016 Central Italy earthquake. Bull. Earthq. Eng. 17, 5655–5677 (2019)
FEMA: Reducing the risks of nonstructural earthquake damage—a practical guide, FEMA E-74. In: Federal Emergency Management Agency and National Earthquake Hazard Reduction Program, USA (2012)
Filiatrault, A., Perrone, D., Merino, R.J., Calvi, G.M.: Performance-based seismic design of non-structural building elements. J. Earthq. Eng. 25(2), 237–269 (2021)
Merino, R.J., Perrone, D., Filiatrault, A.: Calibrated equivalent viscous damping for direct displacement-based seismic design of suspended piping trapeze restraint installations. J. Earthq. Eng. (2021). https://doi.org/10.1080/13632469.2021.1987357
Perrone, D., Rodriguez, D., Filiatrault, A., Brunesi, E., Beiter, C., Piccinin, R.: A framewaork for the quantification of non-structural seismic performance factors. J. Earthq. Eng. (2022). https://doi.org/10.1080/13632469.2021.1991516
NTC: Aggiornamento delle Norme tecniche per le costruzioni. Ministero delle Infrastrutture e dei Trasporti; Roma, Italia (2018)
ASCE: ASCE7-22, Minimum design loads for buildings and other structures. American Society of Civil Engineers, Reston, Virginia, USA (2022)
EUCENTRE. 2022. 6DLAB Eucentre. https://www.eucentre.it/6dlab-laboratory/?lang=en. Last accessed 25 May 2022
Telcordia-GR-63-CORE: NEBSTM Requirements: Physical Protection, Telcordia Technologies Generic Requirements, Piscataway, New Jersey, USA (2006)
Merino, R.J., Perrone, D., Filiatrault, A., Nascimbene, R.: A seismic classification procedure for non-structural building elements based on shake-table qualification testing. In: Proceedings of the 3rd European Conference on Earthquake Engineering and Seismology. Bucharest, Romania (2022)
ISO13033. 2013. Bases for design of structures—loads, forces and other actions -Seismic actions on nonstructural components for building applications. International Organization for Standardization, Geneva, Switzerland
EN 1998-1: Eurocode 8—Design provisions for earthquake resistant structures, EN-1998-1:2011, Comite Europeen de Normalization, Brussels, Belgium (2011)
ICC-ES: Acceptance criteria for seismic qualification by shake table testing of nonstructural components and systems. International Code Council Evaluation Service, International Code Council AC156, Whittier, CA (2012)
Acknowledgements
The authors gratefully acknowledge the funding by Italian Ministry of Education, University and Research (PON Grant n.1735/2017, CADS Project). The authors would also like to acknowledged ETA SpA for providing the electrical cabinet specimens used for the qualification shake table testing.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2023 The Author(s), under exclusive license to Springer Nature Switzerland AG
About this paper
Cite this paper
Merino, R.J. et al. (2023). A Shake Table Testing Campaign of Electrical Cabinets. In: Cimellaro, G.P. (eds) Seismic Isolation, Energy Dissipation and Active Vibration Control of Structures. WCSI 2022. Lecture Notes in Civil Engineering, vol 309. Springer, Cham. https://doi.org/10.1007/978-3-031-21187-4_63
Download citation
DOI: https://doi.org/10.1007/978-3-031-21187-4_63
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-031-21186-7
Online ISBN: 978-3-031-21187-4
eBook Packages: EngineeringEngineering (R0)