Abstract
The paper presents some technical features regarding the realization of dental prostheses and models by modern CAD-CAM technologies that operate on both the subtractive principle and the additive principle highlighting the advantages and disadvantages for each manufacturing approach compared to traditional methods applied in dental prosthetics. It also describes the processing steps for making dental prostheses by CAD-CAM methods, the equipment used, as well as the characteristics of the resulting restorations.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Moraru, E.: Cercetări privind realizarea protezelor dentare prin depuneri selective cu laser și prin alte tehnologii aditive (Research on the realization of dental prostheses by selective laser deposition and other additive technologies). Ph.D. thesis, Politehnica University of Bucharest, Romania (2021)
Berkowitz, B., Holland, G., Moxham, B.: Oral Anatomy, Histology and Embriology. Edited by Mosby (2009)
Sabharwal, A., Stellrecht, E., Scannapieco, F.A.: Associations between dental caries and systemic diseases: a scoping review. BMC Oral Health 21 (2021). Article number: 472. https://doi.org/10.1186/s12903-021-01803-w
Wostmann, B., et al.: Indications for removable partial dentures: a literature review. Int. J. Prosthodont. 18(2), 139–145 (2005)
Al Jehani, Y.A., Baskaradoss, J.K., Geevarghese, A., AlShehry, M.A.: Current trends in aesthetic dentistry. Health 6, 1941–1949 (2014)
Wassell, R., Walls, A.W.G., Steele, J.G.: Crowns and extra-coronal restorations: materials selection. Br. Dent. J. 192(4), 199–202 (2002)
Christensen, G.J.: Fixed prosthodontics–state of the art. Aust. Dent. J. 40(3), 164–166 (1995)
Alghazzawi, T.F.: Advancements in CAD/CAM technology: options for practical implementation. J Prosthodont. Res. 60(2), 72–84 (2016)
Moraru, E., Dontu, O., Petre, A., Vaireanu, D., Constantinescu, F., Besnea, D.: Some technological particularities on the execution of dental prostheses realized by selective laser deposition. J. Optoelectron. Adv. Mater. 20(3–4), 208–213 (2018)
Moraru, E., Dontu, O., Rizescu, C., Spanu, A., Ciobanu, R., Draghici, C.: Laser-assisted additive technologies for the execution of dental restorative prostheses. IOP Conf. Ser. Mater. Sci. Eng. 997(1) (2020). Article number: 012050
Wendt, S.L., Jr.: Nonprecious cast-metal alloys in dentistry. Curr. Opin. Dent. 1(2), 222–227 (1991)
Chochlidakis, K.M., Papaspyridakos, P., Geminiani, A., Chen, C.J., Feng, I.J., Ercoli, C.: Digital versus conventional impressions for fixed prosthodontics: a systematic review and meta-analysis. J. Prosthet. Dent. 116(2), 184–190 (2016)
Chen, W.-C., Teng, F.-Y., Hung, C.-C.: Characterization of Ni-Cr alloys using different casting techniques and molds. Mater. Sci. Eng. C Mater. Biol. Appl. 35, 231–238 (2014)
Frazer, R.Q., Byron, R.T., Osborne, P.B., West, K.P.: PMMA: an essential material in medicine and dentistry. J. Long Term Eff. Med. Implants 15(6), 629–639 (2005)
Miyazaki, T., Hotta, Y.: CAD/CAM systems available for the fabrication of crown and bridge restorations. Aust. Dent. J. 56, 97–106 (2011)
Sulaiman, T.: Materials in digital dentistry-a review. J. Esthet. Restor. Dent. 32(2), 171–181 (2020)
Coandǎ, P., Avram, M., Constantin, V.: A state of the art of predictive maintenance techniques. IOP Conf. Ser. Mater. Sci. Eng. 997(1) (2020). Article number: 012039
Bratu, E., Bratu, D., Borsanu, I.: Telescoping implant prosthese with galvano mesostructures. Rom. J. Oral Rehabil. 1(4), 29–34 (2009)
Kruth, J.P., Wang, X., Laoui, T., Froyen, L.: Lasers and materials in selective laser sintering. Assembly Autom. 23(4), 357–371 (2003)
Kruth, J.P., Mercelis, P., Van Vaerenbergh, J., Froyen, L., Rombouts, M.: Binding mechanisms in selective laser sintering and selective laser melting. Rapid Prototyping J. 11(1), 26–36 (2005)
Moraru, E., Besnea, D., Dontu, O., Gheorghe, G.I., Constantin, V.: Applications of additive technologies in realization of customized dental prostheses. In: Gheorghe, G.I. (ed.) ICOMECYME 2018. LNNS, vol. 48, pp. 8–17. Springer, Cham (2019). https://doi.org/10.1007/978-3-319-96358-7_2
Moraru, E., Dontu, O., Besnea, D., Constantin, V.: Study and realization of prosthetic dental models by additive technologies. IOP Conf. Ser. Mater. Sci. Eng. 444 (2018). Article number: 042017
Moraru, E., Dontu, O., Spanu, A., Prisecaru, D., Draghici, C.: Some considerations regarding the use of vat photopolymerisation technique in prosthodontics. Int. J. Mechatron. Appl. Mech. 6(I), 87–90 (2019)
Trident Dental Clinic Bucharest. https://clinicatrident.ro/
Ceramill Motion 2 CAD-CAM milling machine. https://www.amanngirrbach.com/
CEREC MC XL Sirona CAD-CAM installation. https://www.dentsplysirona.com/
Moraru, E., Dontu, O., Besnea, D., Rizescu, C., Rizescu, D., Constantin, V.: Theoretical and numerical researches on the electrochemical polishing of dental prostheses realized by selective laser melting. IOP Conf. Ser. Mater. Sci. Eng. 564 (2019). Article number: 012029
Moraru, E., Dontu, O., Rizescu, C., Rizescu, D.: Comparative study and mechanical analysis of some additive manufactured dental models. Acta Tech. Napocensis-Ser. Appl. Math. Mech. Eng. 64(3), 503–508 (2021)
Sandu, A., Bogatu, L., Ionascu, G., Manea, E., Gheorghe, V.: Modeling, simulation and experimental research for MEMS cantilevers of complex geometry. In: MATEC Web of Conferences, vol. 290, p. 08002 (2019)
Acknowledgements
Research has been partially supported by the European Social Fund from the Sectoral Operational Programme Human Capital 2014–2020, through the Financial Agreement with the title “Scholarships for entrepreneurial education among doctoral students and postdoctoral researchers (Be Antreprenor!)”, Contract no. 51680/09.07.2019 - SMIS code: 124539.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2023 The Author(s), under exclusive license to Springer Nature Switzerland AG
About this paper
Cite this paper
Moraru, E., Dontu, G.O., Apostolescu, T.C., Cartal, L.A., Grămescu, B., Dawod, N. (2023). Aspects Regarding Subtractive and Additive CAD-CAM Processes Applied in Prosthetic Dentistry. In: Machado, J., et al. Innovations in Mechanical Engineering II. icieng 2022. Lecture Notes in Mechanical Engineering. Springer, Cham. https://doi.org/10.1007/978-3-031-09382-1_9
Download citation
DOI: https://doi.org/10.1007/978-3-031-09382-1_9
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-031-09381-4
Online ISBN: 978-3-031-09382-1
eBook Packages: EngineeringEngineering (R0)