Abstract
The problems of modeling and research of disk tool magazines of drilling-milling-boring machining centers are considered. Three-dimensional modeling of the tool magazine structures and auto operator devices (manipulator) as the main components of the automatic tool change system during processing body parts has been carried out. The integrated computer-aided design system and specialized applied libraries in the express mode of 3D modeling were used. A new approach to improving the drive device of the tool magazine is proposed, based on the modification of the gear drive design using an incline-arched profile of the teeth. The design technique of its closest analogue – a cylindrical gear transmission with helical teeth according to the criterion of contact endurance of the teeth as the main method for the calculation was adopted. An experiment is carried out to assess the main kinetic-geometric parameters of spur gears with incline-arched teeth. The relationship between the engagement parameters and the size of the gear cutting head has been established. The extreme values of the inclination angles for the incline-arched teeth for the given basic dimensions of the transmission have been determined. Dependences for calculating the longitudinal curvature and length of the cut teeth are obtained to research the bending strength of the transmission teeth.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Dervoort, W.H.: Modern Machine Shop Tools, Their Construction, Operation and Manipulation, Including Both Hand and Machine Tools. Creative Media, London, LLS (2018)
Borovik, A., Gorlachev, V., Lelyukhin, V., Cheboksarov, V.: Metal-cutting machines. Training and methodology complex. Prospect, Moscow (2019)
Lynch, M.: Machining Center. Setup and Operation. CNC Concept, Inc., Illinois (2013)
Platonov, L.: 15 novelties of KOMPAS-3D vol 15. CAD Graph. 6, 7–21 (2014)
Nikonov, I.: KOMPAS-3D Creation of models. Progress book, Moscow (2020)
Schaupp, E., Abele, E., Metternich, J.: Evolution relevant factors for developing an optimal tool storage strategy. Procedia CIRP 55, 23–28 (2016). https://doi.org/10.1016/j.procir.2016.08.047
Rochov, P., Hund, E., Gruss, M., Nuhuis, P.: Development of a mathematical model for the calculation of the tool appropriation delay depending on the tool inventory. Logist. J. referierte Veröffentlichungen 2015 (2015). https://doi.org/10.2195/lj_Rev_rochow_en_201503_01
Chen, C., Tian, H., Zhang, J., et al.: Study on failure warning of tool magazine and automatic tool changer. J. Vibroeng. 18(2), 883–899 (2016)
Li, G., Wang, Y., He, J., et al.: Fault forecasting of a machining center tool magazine based on health assessment. Math. Prob. Eng., 1–10 (2020). DOI: https://doi.org/10.1155/2020/5796965
Yan, Y., Yin, Y., Xiong, Z., Wu, L.: The simulation and optimization of chain tool magazine automatic tool change process. Adv. Mater. Res. 834–836, 1758–1761 (2014)
Litvin, F.L., Qi, Fan, Fuentes, A.: Computerized design, generation, simulation of meshing and contact of face-milled format cut spiral bevel gears (2001). https://doi.org/10.21236/ada394095
Janigova, S., Schurger, B.: Design optimization of the modified planetary carrier. J. Eng. Sci. 8(1), E17–E22 (2020). https://doi.org/10.21272/jes.2021.8(1).e3
Zhilevski, M., Mikhov, M.: Study and performance improvement of the drive systems for a class of machine tools. In: 14th International Conference on Modern Technologies in Manufacturing, MATEC Web of Conferences, Cluj Napoca, Romania, vol. 299, p. 05003 (2019). DOI: https://doi.org/10.1051/matecconf/201929905003
Pavlenko, I., Ivanov, V., Kuric, I., Gusak, O., Liaposhchenko, O.: Ensuring vibration reliability of turbopump units using artificial neural networks. In: Trojanowska, J., Ciszak, O., Machado, J.M., Pavlenko, I. (eds.) MANUFACTURING 2019. LNME, pp. 165–175. Springer, Cham (2019). https://doi.org/10.1007/978-3-030-18715-6_14
Krol, O., Porkuian, O., Sokolov, V., Tsankov, P.: Vibration stability of spindle nodes in the zone of tool equipment optimal parameters. Compters rendus de l’Acade’mie bulgare des Sciences 72(11), 1546–1556 (2019). https://doi.org/10.7546/CRABS.2019.11.12
Rogovyi, A., Korohodskyi, V., Medvediev, Y.: Influence of Bingham fluid viscosity on energy performances of a vortex chamber pump. Energy 218, 119432 (2021)
Tsankov, P.: Modeling of vertical spindle head for machining center. J. Phys. Conf. Ser. 1553, 012012 (2020). https://doi.org/10.1088/1742-6596/1553/1/012012
Krivosheya, A.V., Voznyy, V.V., Melnyk, V.E.: Analysis of the gear tooth gearing by the module m = 2625 mm of hydraulic pumps. J. Eng. Sci. 4(1), A11–A15 (2017)
Ivanov, V., Dehtiarov, I., Pavlenko, I., Kosov, I., Kosov, M.: Technology for complex parts machining in multiproduct manufacturing. Manag. Prod. Eng. Rev. 10(2), 25–36 (2019). https://doi.org/10.24425/mper.2019.129566
Syzyi, Y., Ushakov, O., Slipchenko, S., Basova, Y., Ivanova, M.: Simulation of the contact temperature in the cylindrical plunge grinding process. Diagnostyka 21(2), 77–86 (2020). https://doi.org/10.29354/diag/122532
Radzevich, S.: Theory of Gearing: Kinematics, Geometry, and Synthesis, 2nd edn. CRC Press, Boca Raton (2018)
Krol, O., Sokolov, V.: Research of modified gear drive for multioperational machine with increased load capacity. Diagnostyka 21(3), 87–93 (2020). https://doi.org/10.29354/diag/126026
Ivanov, V., Dehtiarov, I., Pavlenko, I., Kosov, M., Hatala, M.: Technological assurance and features of fork-type parts machining. In: Ivanov, V., et al. (eds.) DSMIE 2019. LNME, pp. 114–125. Springer, Cham (2020). https://doi.org/10.1007/978-3-030-22365-6_12
Kubo, A., Ueda, A.: Gear geometry as function of production method. In: The Proceedings of the JSME International Conference on Motion and Power Transmission, vol. 5, no. 1, pp. 27–44 (2017)
Solid cutters for bevel gears. Standard ASP 2023-special S390. Padova (2014)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2022 The Author(s), under exclusive license to Springer Nature Switzerland AG
About this paper
Cite this paper
Krol, O., Sokolov, V. (2022). Development of the Disk Tool Magazine with Modified Gear Drive. In: Ivanov, V., Trojanowska, J., Pavlenko, I., Rauch, E., Peraković, D. (eds) Advances in Design, Simulation and Manufacturing V. DSMIE 2022. Lecture Notes in Mechanical Engineering. Springer, Cham. https://doi.org/10.1007/978-3-031-06025-0_17
Download citation
DOI: https://doi.org/10.1007/978-3-031-06025-0_17
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-031-06024-3
Online ISBN: 978-3-031-06025-0
eBook Packages: EngineeringEngineering (R0)