Abstract
One of the easiest to observe conditions where waves occur in nature is the undulatory motion of aquatic animals and micro-organisms. In these bio-mechanisms, there is oscillatory locomotion which results in propulsion as the motion is accompanied by energy transfer from one end of the specimen or structure to the other end. Recent years have also seen a rise in the replication of the propulsive capabilities of these animals into aquatic robots. The use of smart materials to actuate and mimic the fin and tail characteristics of a fish has been attempted in various ways. Miniature robots actuated by piezoelectric materials have been effectively used for propulsion due to their simplicity and innovative actuating mechanism. These miniature robots find their application in the regime of underwater propulsion because of their size, flexibility, and ability to mimic fish locomotion. In most of these studies, the undulatory motion of these aquatic robots is achieved by discretizing the fin of the robot into multiple segments and synchronizing the oscillatory motion of individual segments to replicate continuous traveling waves. As a part of such endeavors, the present work attempts to use smart materials to actuate and mimic the fin motion characteristics of a fish. The bio-inspired design of the miniature robots consists of two brass shims supported by four piezoelectric bimorphs. The undulatory motion displayed by aquatic animals is mimicked by generating anechoic traveling waves in these brass fins. Anechoic traveling waves propagate in a structure without undergoing reflections at the structural boundaries. Such waves are generated by taking advantage of the structural dynamics of the fin under multi-input excitation.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Stone, H.A., Samuel, A.D.: Propulsion of microorganisms by surface distortions. Phys. Rev. Lett. 77(19), 4102 (1996)
Jones, L., et al.: Vehicle propulsion by solid state motion. In: ASME 2014 Conference on Smart Materials, Adaptive Structures and Intelligent Systems. American Society of Mechanical Engineers (2014)
Malladi, V.V.N.S.: Continual Traveling waves in Finite Structures: Theory, Simulations, and Experiments. Virginia Tech (2016)
Malladi, V.S., Avirovik, D., Priya, S., Tarazaga, P.A., et al.: Travelling wave phenomenon through a piezoelectric actuation on a free-free beam. In: Smart Materials, Adaptive Structures and Intelligent Systems, vol. 46148, p. V001T03A017. American Society of Mechanical Engineers (2014)
Motaharibidgoli, S., Malladi, V.V.N.S., Tarazaga, P.A.: Developing a Passive Vibration Absorber to Generate Traveling Waves in a Beam. In: Special Topics in Structural Dynamics, vol. 5, pp. 245–248. Springer International Publishing, Cham (2019)
Musgrave, P.F., Malladi, V.S., Tarazaga, P.A.: Generation of traveling waves in a 2D plate for future drag reduction manipulation. In: Special Topics in Structural Dynamics, vol. 6, pp. 129–138. Springer (2016)
Motaharibidgoli, S., Malladi, V.S., Tarazaga, P.A.: Generating anechoic traveling wave in beams with various boundary conditions. In: Sensors and Instrumentation, Aircraft/Aerospace, Energy Harvesting & Dynamic Environments Testing, vol. 7, pp. 387–393. Springer (2020)
Anakok, I., Davaria, S., Tarazaga, P.A., Malladi, V.V.: A study on steady-state traveling waves in one-dimensional non-dispersive finite media. J. Sound Vib. (528), 116907 (2022)
Malladi, V.V.S., et al.: Investigation of propulsive characteristics due to traveling waves in continuous finite media. In: Bioinspiration, Biomimetics, and Bioreplication 2017. International Society for Optics and Photonics (2017)
Malladi, V.V.S., Albakri, M., Tarazaga, P.A.: An experimental and theoretical study of two-dimensional traveling waves in plates. J. Intell. Mater. Syst. Struct. 28(13), 1803–1815 (2017)
Schwarz, B.J., Richardson, M.H.: Experimental modal analysis. CSI Reliability Week. 35(1), 1–12 (1999)
Krylov, V.V., Porteous, E.: Wave-like aquatic propulsion of mono-hull marine vessels. Ocean Eng. 37(4), 378–386 (2010)
Acknowledgements
Dr. Malladi and Dr. Tarazaga would like to acknowledge the generous support from the DARPA/NRL (Grant No. 450552) that provided the funding for this project. Dr. Tarazaga would like to acknowledge the financial support of the John R. Jones III Faculty Fellowship.
Approved for Public Release, Distribution Unlimited.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2023 The Author(s), under exclusive license to Springer Nature Switzerland AG
About this paper
Cite this paper
Davaria, S., Krishnan, M., Sriram Malladi, V.V.N., Tarazaga, P.A. (2023). Miniature Underwater Robot – An Experimental Case Study. In: Allen, M., Davaria, S., Davis, R.B. (eds) Special Topics in Structural Dynamics & Experimental Techniques, Volume 5. Conference Proceedings of the Society for Experimental Mechanics Series. Springer, Cham. https://doi.org/10.1007/978-3-031-05405-1_16
Download citation
DOI: https://doi.org/10.1007/978-3-031-05405-1_16
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-031-05404-4
Online ISBN: 978-3-031-05405-1
eBook Packages: EngineeringEngineering (R0)