Abstract
The vibration experiment of the sugarcane harvester is of significant value, and it is mainly done in the sugarcane field. This method has low efficiency, poor security and reliability. So, a sugarcane field excitation device is designed in this paper based on the sugarcane field excitation signal already collected. The dynamic characteristics of the sugarcane field excitation device are studied by using theoretical analysis, simulation analysis and experimental research methods. The multi-body dynamic model is studied by using rigid-flexible coupling simulation technology. Based on the simulation results, the sugarcane field excitation device is manufactured. The output frequency of the sugarcane field excitation device is calibrated by the speed calibration method. Finally, based on the experimental optimization results, the function of the sugarcane field excitation device is verified.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Dongsheng, L., Sijing, T.: The analysis of the accounting and controlling of sugarcane production cost in Guangxi. Academic Forum 08, 28–43 (2013)
Lin, H., Lai, R., Zeng, Z.: Study on the technical specification of sugarcane mechanization harvesting. In: International Academic Conference of Chinese Society for Agricultural Machinery (2012)
Chen, C., He, L., Yan, H.: Research on the several agronomic techniques of sugarcane mechanization harvesting. In: The Annual Meeting of the Crop Science Society of China (in Chinese with English abstract) (2014)
Oduori, M.F., Sakai, J., Gupta, C.P.: Kinematics of revolving-knife disk-type sugarcane basecutter-1. AMA 23(4), 9–15 (1992)
Kroes, S., Harris, H.D.: Variation of cutting energies along a sugarcane internode. In: Conference on Engineering in Agriculture and Food Processing. Held University of Queensland, Gatton College, Lawes. Agricultural-Engineering-Australia, Vol. 25, 3, 55 (1996)
Kroes, S., Harris, H.D.: The specific splitting energy of sugarcane. In: Proceedings of the 1998 Conference of the Australian Society of Sugar Cane Technologists held at Ballina. NSW, Australia, pp. 349–356 (1998)
da Cunha Mello, R., Harris, H.: Cane damage and mass losses for conventional and serrated hasecutter blades. Proc. Aust. Soc. Soc. Sugar Cane Technol. 22, 84–91 (2000)
Kroes, S., Harris, H.: Effects of cane harvester base cutter parameters on the quality of cut. Proc. Aust. Soc. Sugar Stalk Technol. 169–179 (1994)
Mello, R.D.C., Harris, H.: Performance of basecutter of sugarcane harvester with angled and serrated blades. Revista Brasileira De Engenharia Agricola E Ambiental 7(2), 355–358 (2003)
Liu, Q., Ou, Y., Qing, S., et al.: Failure experiments of sugarcane stalks under torsion, compression and tension load. Trans. Chinese Soc. Agric. Eng. 22(6), 201–204 (2006) (in Chinese with English abstract)
Liu, Q., Ou, Y., Qing, S., Song, C.: Mechanics analysis on stubble damage of sugarcane stalk during cutting by smooth-edge blade. Trans. Chinese Soc. Agric. Mach. 38(9), 70–73 (2007) (in Chinese with English abstract)
Liu, Q., Ou, Y., Qing, S., et al.: Stubble damage of sugarcane stalks in cutting experiment by smooth-edge blade. Trans. CSAE 23(3), 103–107 (2007) (in Chinese with English abstract)
Liu, Q., Ou, Y., Qing, S., et al.: Study on the cutting mechanism of sugarcane stem. J. Agric. Mechanization Res. (01), 21–24 2007
Yang, J., Chen, G.: Experimental study on influencing factors of broken biennial root rate for a single base cutter of sugarcane harvester. Trans. Chinese Soc. Agric. Mach. 38(3), 69–74 (2007) (in Chinese with English abstract)
Jian, Y., Zhaoxin, L., Mo, J., et al.: Experimental research on factors affecting the cutting quality o f sugarcane cutter. Trans. Chinese Soc. Agric. Eng. 21(5), 60–64 (2005). (in Chinese with English abstract)
Wang, Y., Jian, Y., Zenghan, L., et al.: Dynamic simulation experiment on effects of sugarcane cutting beneath surface soil. Chinese Soc. Agric. Eng. 27(08), 150–157 (2011). (in Chinese with English abstract)
Zhiqing, C.: Structure Design and Analysis and Experiment Research of the Carrying Frame in Minitype Sugarcane Harvester. Guangxi University, Guangxi (2007).(in Chinese with English abstract)
Li, J., Zhang, Z., Xu, H., Feng, Z.: Dynamic characteristics of the vibratory roller experiment-bed vibration isolation system: simulation and experiment. J. Terramechanics Dyn. 56, 139–156 (2014)
Qiu, C., Li, S., Mo, H., Yang, D., et al.: Collection and analysis of main excitation source signals of sugarcane harvester. In: Agricultural Mechanization Research (2018) (in Chinese)
Mo, H., Li, S., Zhou, J., Qiu, C., et al.: Axial vibration experiments for cutter frames of sugarcane harvesters with different structures under complicated excitation. IAEJ 27(3), 18 (2018)
Liu, F., Wu, J., Gu, F., Ball, A.D.: An introduction of a robust OMA method: CoS-SSI and its performance evaluation through the simulation and a case study. Shock Vib. (2019)
Soria, L., Peeters, B., Anthonis, J., der Auweraer, H.V.: Operational modal analysis and the performance assessment of vehicle suspension systems. Shock Vib. 19(5), 1099–1113 (2012)
Shi, F., Wang, H., et al.: Road spectrum bench experiment research. J. Vib. Shock 19 (2012)
Geng, Y., et al.: Vehicle road simulation experiment control technology. Autom. Appl. 03, 28–31 (2011)
Acknowledgements
Fund projects: 1. Middle-aged and Young Teachers’ Basic Scientific Research Ability Promotion Project of Guangxi Universities called Dynamic reverse design research on sugarcane harvesters for hilly areas based on dynamic characteristics of cutters (Project number: 2020KY17008) of China, 2020.
2. Major university-level research project of Wuzhou University called Reverse design method research on sugarcane harvesters for hilly areas based on dynamic characteristics of cutters (Project number: 2020B003) of China, 2020.
3. National Natural Science Foundation Project called Research on cutting system vibration characteristics of sugarcane harvesters under complicated excitations (Grant Number: 51465006) of China, 2014.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2023 The Author(s), under exclusive license to Springer Nature Switzerland AG
About this paper
Cite this paper
Mo, H., Qiu, C., Li, S., He, G., Zeng, B., Yang, D. (2023). Emulational and Experimental Research on a Sugarcane Field Excitation Device. In: Zhang, H., Feng, G., Wang, H., Gu, F., Sinha, J.K. (eds) Proceedings of IncoME-VI and TEPEN 2021. Mechanisms and Machine Science, vol 117. Springer, Cham. https://doi.org/10.1007/978-3-030-99075-6_6
Download citation
DOI: https://doi.org/10.1007/978-3-030-99075-6_6
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-99074-9
Online ISBN: 978-3-030-99075-6
eBook Packages: EngineeringEngineering (R0)