Abstract
This chapter defines circular construction, and how the construction industry should prepare and make interventions to promote the transition from a linear model to circular and sustainable ways of designing, constructing, maintaining and dealing with waste. Circular construction is an emerging business strategy that promotes the reuse and recycling of as many raw materials as possible in a bid to minimise CO2 emissions and waste to landfill. The chapter focuses on construction and demolition waste (CDW) and how potential new technologies developed for other applications can be utilised to bring circularity to CDW management. CDW alarming impacts have caused increased public concerns. Aiming to boost resource exploitation efficiency, circular construction should improve CDW waste management practices. However, transition and implementation of circular construction practices are slowed down by technical, social and legislative barriers. Circular construction, as an important component of sustainability, is a new business model that promotes the maximum reuse and recycling of raw materials and products to reduce waste and CO2 emissions. Reduce, reuse, recycle and recover are essential interventions for a circular construction, with a systemic shift in the culture and mindsets of stakeholders.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Advanced Dry Recovery (ADR) technology upgrades fine non-ferrous metals from municipal waste-to-energy ash. European Circular Economy Stakeholder Platform, 2008. https://circulareconomy.europa.eu/platform/en/good-practices/advanced-dry-recovery-adr-technology-upgrades-fine-non-ferrous-metals-municipal-waste-energy-ash
Afshinnia, K., & Poursaee, A. (2015). The potential of ground clay brick to mitigate Alkali-Silica reaction in mortar prepared with highly reactive aggregate. Construction and Building Materials, 95, 164–170. https://doi.org/10.1016/j.conbuildmat.2015.07.155
Ajayi, S. O., & Oyedele, L. O. (2017). Policy imperatives for diverting construction waste from landfill: Experts’ recommendations for UK policy expansion. Journal of Cleaner Production, 147, 57–65. https://doi.org/10.1016/j.jclepro.2017.01.075
Artificial intelligence and the circular economy AI as a tool to accelerate, 2013. https://www.ellenmacarthurfoundation.org/assets/downloads/Artificial-intelligence-and-the-circular-economy.pdf
Aslam, M. S., Huang, B., & Cui, L. (2020). Review of construction and demolition waste management in China and USA. Journal of Environmental Management, 264, 110445. https://doi.org/10.1016/j.jenvman.2020.110445
Aslani, F., Ma, G., Yim Wan, D. L., & Muselin, G. (2018). Development of high-performance self-compacting concrete using waste recycled concrete aggregates and rubber granules. Journal of Cleaner Production, 182, 553–566. https://doi.org/10.1016/j.jclepro.2018.02.074
Bao, Z., Lee, W. M. W., & Lu, W. (2020). Implementing on-site construction waste recycling in Hong Kong: Barriers and facilitators. Science of the Total Environment, 747, 141091. https://doi.org/10.1016/j.scitotenv.2020.141091
Bao, Z., & Lu, W. (2020). Developing efficient circularity for construction and demolition waste management in fast emerging economies: Lessons learned from Shenzhen, China. Science of the Total Environment, 724, 138264. https://doi.org/10.1016/j.scitotenv.2020.138264
Benachio, G. L. F., Freitas, M. C. D., & Tavares, S. F. (2020). Circular economy in the construction industry: A systematic literature review. Journal of Cleaner Production, 260, 121046. https://doi.org/10.1016/j.jclepro.2020.121046
Boarder, R., & Owens, P. (2014). The Innovate 18 project: Light weight aggregate for concrete. Crossrail Ltd: INV00031 Manufacture of Lightweight Aggregate from London Clay (n.d.).
Bonoli, A., Zanni, S., & Serrano-Bernardo, F. (2021). Sustainability in building and construction within the framework of circular cities and European new green deal. The Contribution of Concrete Recycling, Sustainability, 13, 1–16. https://doi.org/10.3390/su13042139
Chi, B., Lu, W., Ye, M., Bao, Z., & Zhang, X. (2020). Construction waste minimization in green building: A comparative analysis of LEED-NC 2009 certified projects in the US and China. Journal of Cleaner Production, 256, 120749. https://doi.org/10.1016/j.jclepro.2020.120749
Chiaroni, D., Orlandi, M., & Urbinati, A. (2021). The role of digital technologies in business model transition toward circular economy in the building industry. In Digitalization: Approaches, case studies, and tools for strategy, transformation and implementation. https://doi.org/10.1007/978-3-030-69380-0_3
Chougan, M., Ghaffar, S. H., Sikora, P., Chung, S. Y., Rucinska, T., Stephan, D., Albar, A., & Swash, M. R. (2021). Investigation of additive incorporation on rheological, microstructural and mechanical properties of 3D printable alkali-activated materials. Materials and Design, 202, 109574. https://doi.org/10.1016/j.matdes.2021.109574
Construction and demolition debris: Material-specific data, U.S. EPA. (2020). https://www.epa.gov/facts-and-figures-about-materials-waste-and-recycling/construction-and-demolition-debris-material
de Juan, M. S., & Gutiérrez, P. A. (2009). Study on the influence of attached mortar content on the properties of recycled concrete aggregate. Construction and Building Materials, 23, 872–877. https://doi.org/10.1016/j.conbuildmat.2008.04.012
Devi, S. V., Gausikan, R., Chithambaranathan, S., & Jeffrey, J. W. (2020). Utilization of recycled aggregate of construction and demolition waste as a sustainable material. Material Today Proceedings, 45, 6649–6654. https://doi.org/10.1016/j.matpr.2020.12.013
Eurostat. (2018). Generation of waste by waste category, hazardousness and NACE Rev. 2 activity, 2018. http://appsso.eurostat.ec.europa.eu/nui/show.do?dataset=env_wasgen&lang=en
Ferdous, W., Manalo, A., Siddique, R., Mendis, P., Zhuge, Y., Wong, H. S., Lokuge, W., Aravinthan, T., & Schubel, P. (2021). Recycling of landfill wastes (tyres, plastics and glass) in construction—A review on global waste generation, performance, application and future opportunities. Resources, Conservation and Recycling, 173, 105745. https://doi.org/10.1016/j.resconrec.2021.105745
Fořt, J., & Černý, R. (2020). Transition to circular economy in the construction industry: Environmental aspects of waste brick recycling scenarios. Waste Management, 118, 510–520. https://doi.org/10.1016/j.wasman.2020.09.004
Gao, C., Huang, L., Yan, L., Jin, R., & Chen, H. (2020). Mechanical properties of recycled aggregate concrete modified by nano-particles. Construction and Building Materials, 241, 118030. https://doi.org/10.1016/j.conbuildmat.2020.118030
Geissdoerfer, M., Savaget, P., Bocken, N. M. P., & Hultink, E. J. (2017). The circular economy—A new sustainability paradigm? Journal of Cleaner Production, 143, 757–768. https://doi.org/10.1016/j.jclepro.2016.12.048
Ghaffar, S., & Mullett, P. (2018). Commentary: 3D printing set to transform the construction industry. Structures and Buildings, 1–2. https://doi.org/10.1680/jstbu.18.00136
Ghaffar, S. H., Burman, M., & Braimah, N. (2020). Pathways to circular construction: An integrated management of construction and demolition waste for resource recovery. Journal of Cleaner Production, 244, 118710. https://doi.org/10.1016/j.jclepro.2019.118710
Global waste generation will nearly double by 2050. Economist, 2018. https://www.economist.com/graphic-detail/2018/10/02/global-waste-generation-will-nearly-double-by-2050
Hossain, M. U., Poon, C. S., Lo, I. M. C., & Cheng, J. C. P. (2016). Comparative environmental evaluation of aggregate production from recycled waste materials and virgin sources by LCA. Resources, Conservation and Recycling, 109, 67–77. https://doi.org/10.1016/j.resconrec.2016.02.009
Ismail, S., & Ramli, M. (2013). Engineering properties of treated recycled concrete aggregate (RCA) for structural applications. Construction and Building Materials, 44, 464–476. https://doi.org/10.1016/j.conbuildmat.2013.03.014
Kabirifar, K., Mojtahedi, M., Wang, C. C, & Vivian T. W. Y. (2020). A conceptual foundation for effective construction and demolition waste management. Cleaner Engineering Technology, 1, 100019. https://doi.org/10.1016/j.clet.2020.100019
Kirchherr, J., Piscicelli, L., Bour, R., Kostense-Smit, E., Muller, J., Huibrechtse-Truijens, A., & Hekkert, M. (2018). Barriers to the circular economy: Evidence from the European Union (EU). Ecological Economics, 150, 264–272. https://doi.org/10.1016/j.ecolecon.2018.04.028
Kirchherr, J., Reike, D., & Hekkert, M. (2017). Conceptualizing the circular economy: An analysis of 114 definitions. Resources, Conservation and Recycling, 127, 221–232. https://doi.org/10.1016/j.resconrec.2017.09.005
Kočí, V., Maděra, J., Jerman, M., Žumár, J., Koňáková, D., Čáchová, M., Vejmelková, E., Reiterman, P., & Černý, R. (2016). Application of waste ceramic dust as a ready-to-use replacement of cement in lime-cement plasters: an environmental-friendly and energy-efficient solution. Clean Technologies and Environmental Policy, 18, 1725–1733.https://doi.org/10.1007/s10098-016-1183-2
Komnitsas, K., Zaharaki, D., Vlachou, A., Bartzas, G., & Galetakis, M. (2015). Effect of synthesis parameters on the quality of construction and demolition wastes (CDW) geopolymers. Advanced Powder Technology, 26, 368–376. https://doi.org/10.1016/j.apt.2014.11.012
Liu, Q., Xiao, J., & Sun, Z. (2011). Experimental study on the failure mechanism of recycled concrete. Cement and Concrete Research, 41, 1050–1057. https://doi.org/10.1016/j.cemconres.2011.06.007
Lotfi, S., Deja, J., Rem, P., Mróz, R., Van Roekel, E., & Van Der Stelt, H. (2014). Mechanical recycling of EOL concrete into high-grade aggregates. Resources, Conservation and Recycling, 87, 117–125. https://doi.org/10.1016/j.resconrec.2014.03.010
Lv, H., Li, Y., Bin Yan, H., Wu, D., Shi, G., & Xu, Q. (2021). Examining construction waste management policies in mainland China for potential performance improvements. Clean Technologies and Environmental Policy, 23, 445–462. https://doi.org/10.1007/s10098-020-01984-y
Ma, M., Tam, V. W. Y., Le, K. N., & Li, W. (2020). Challenges in current construction and demolition waste recycling: A China study. Waste Management, 118, 610–625. https://doi.org/10.1016/j.wasman.2020.09.030
Mahpour, A. (2018). Prioritizing barriers to adopt circular economy in construction and demolition waste management. Resources, Conservation and Recycling, 134, 216–227. https://doi.org/10.1016/j.resconrec.2018.01.026
Malešev, M., Radonjanin, V., & Marinković, S. (2010). Recycled concrete as aggregate for structural concrete production. Sustainability., 2, 1204–1225. https://doi.org/10.3390/su2051204
Menegaki, M., & Damigos, D. (2018). A review on current situation and challenges of construction and demolition waste management. Current Opinion Green and Sustainable Chemistry, 13, 8–15. https://doi.org/10.1016/j.cogsc.2018.02.010
Mukharjee, B. B., & Barai, S. V. (2014). Influence of Nano-Silica on the properties of recycled aggregate concrete. Construction and Building Materials, 55, 29–37. https://doi.org/10.1016/j.conbuildmat.2014.01.003
Müller, C., Reiners, J. & Palm, S. (2015). Closing the loop: What type of concrete re-use is the most sustainable option? European Cement Research Academy. https://ecra-online.org/homesite/
Ogunmakinde, O. E., Sher, W., & Egbelakin, T. (2021). Circular economy pillars: A semi-systematic review. Clean Technologies and Environmental Policy, 23, 899–914.https://doi.org/10.1007/s10098-020-02012-9
Orr, J., Drewniok, M. P., Walker, I., Ibell, T., Copping, A., & Emmitt, S. (2019). Minimising energy in construction: Practitioners’ views on material efficiency. Resources, Conservation and Recycling, 140, 125–136. https://doi.org/10.1016/j.resconrec.2018.09.015
Papakosta, A., Fragkoulis, K., Pantelidou, H., & Burr-Hersey, T. (2020). Transformation of London clay into construction resources: Supplementary cementitious material and lightweight aggregate. https://learninglegacy.hs2.org.uk/document/transformation-of-london-clay-into-construction-resources-supplementary-cementitious-material-and-lightweight-aggregate/
Ranta, V., Aarikka-Stenroos, L., Ritala, P., & Mäkinen, S. J. (2018). Exploring institutional drivers and barriers of the circular economy: A cross-regional comparison of China, the US, and Europe. Resources, Conservation and Recycling, 135, 70–82. https://doi.org/10.1016/j.resconrec.2017.08.017
Sarc, R., Curtis, A., Kandlbauer, L., Khodier, K., Lorber, K. E., & Pomberger, R. (2019). Digitalisation and intelligent robotics in value chain of circular economy oriented waste management—A review. Waste Management, 95, 476–492. https://doi.org/10.1016/j.wasman.2019.06.035
Shaban, W. M., Yang, J., Su, H., Mo, K. H., Li, L., & Xie, J. (2019). Quality improvement techniques for recycled concrete aggregate: A review. Journal of Advanced Concrete Technology, 17, 151–167. https://doi.org/10.3151/jact.17.4.151
Shi, C., Li, Y., Zhang, J., Li, W., Chong, L., & Xie, Z. (2016). Performance enhancement of recycled concrete aggregate—A review. Journal of Cleaner Production, 112, 466–472. https://doi.org/10.1016/j.jclepro.2015.08.057
Singh, J., & Sung, K. (2021). Systems approach to scaling-up global upcycling: Framework for empirical research. In State-of-the-art upcycling research and practice (pp. 99–103). https://doi.org/10.1007/978-3-030-72640-9_19
Smol, M., Kulczycka, J., & Avdiushchenko, A. (2017). Circular economy indicators in relation to eco-innovation in European regions. Clean Technologies and Environmental Policy, 19, 669–678. https://doi.org/10.1007/s10098-016-1323-8
Tons of solid waste generated. World-Counts, 2020. https://www.theworldcounts.com/challenges/planet-earth/state-of-the-planet/solid-waste/story
Vejmelková, E., Keppert, M., Rovnaníková, P., Ondráček, M., Keršner, Z., & Černý, R. (2012). Properties of high performance concrete containing fine-ground ceramics as supplementary cementitious material. Cement and Concrete Composites, 34, 55–61. https://doi.org/10.1016/j.cemconcomp.2011.09.018
Wang, B., Yan, L., Fu, Q., & Kasal, B. (2021). A comprehensive review on recycled aggregate and recycled aggregate concrete. Resources, Conservation and Recycling, 171, 105565. https://doi.org/10.1016/j.resconrec.2021.105565
Wang, Z., Li, H., & Yang, X. (2020). Vision-based robotic system for on-site construction and demolition waste sorting and recycling. Journal of Building Engineering, 32, 101769. https://doi.org/10.1016/j.jobe.2020.101769
Yuan, H. (2017). Barriers and countermeasures for managing construction and demolition waste: A case of Shenzhen in China. Journal of Cleaner Production, 157, 84–93. https://doi.org/10.1016/j.jclepro.2017.04.137
Yuan, H., Shen, L., & Wang, J. (2011). Major obstacles to improving the performance of waste management in China’s construction industry. Facilities, 29, 224–242. https://doi.org/10.1108/02632771111120538
Zezhou, W., Ann T. W. Y., Hao, W., Yigang, W., & Xiaosen, H. (2019). Driving factors for construction waste minimization: empirical studies in Hong Kong and Shenzhen. Journal of Green Building, 14, 155–167. https://doi.org/10.3992/1943-4618.14.4.155
Zhang, H., Ji, T., Liu, H., & Su, S. (2018). Modifying recycled aggregate concrete by aggregate surface treatment using sulphoaluminate cement and basalt powder. Construction and Building Materials, 192, 526–537. https://doi.org/10.1016/j.conbuildmat.2018.10.160
Zhao, Y., Gao, J., Chen, F., Liu, C., & Chen, X. (2018). Utilization of waste clay bricks as coarse and fine aggregates for the preparation of lightweight aggregate concrete. Journal of Cleaner Production, 201, 706–715. https://doi.org/10.1016/j.jclepro.2018.08.103
Zheng, L., Wu, H., Zhang, H., Duan, H., Wang, J., Jiang, W., Dong, B., Liu, G., Zuo, J., & Song, Q. (2017). Characterizing the generation and flows of construction and demolition waste in China. Construction and Building Materials, 136, 405–413. https://doi.org/10.1016/j.conbuildmat.2017.01.055
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2022 The Author(s), under exclusive license to Springer Nature Switzerland AG
About this chapter
Cite this chapter
Ghaffar, S.H., Salman, M., Chougan, M. (2022). The Circular Construction Industry. In: Ghaffar, S.H., Mullett, P., Pei, E., Roberts, J. (eds) Innovation in Construction. Springer, Cham. https://doi.org/10.1007/978-3-030-95798-8_4
Download citation
DOI: https://doi.org/10.1007/978-3-030-95798-8_4
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-95797-1
Online ISBN: 978-3-030-95798-8
eBook Packages: EngineeringEngineering (R0)