Skip to main content

Research of Automatic Rotational Frequency Control Systems of Automobile Diesel Engine

  • Conference paper
  • First Online:
TRANSBALTICA XII: Transportation Science and Technology (TRANSBALTICA 2019)

Abstract

The purpose of the research is to compare the quality indicators of speed control of the automobile diesel engine with all-mode mechanical and microprocessor regulators in steady state conditions and in transient. Comparative motor research conducted on the same automobile diesel engine (125 kW, 4-cylinder, 120 mm cylinder diameter and 140 mm stroke). The object of experimental research is the automatic rotational frequency control systems of crankshaft diesel engine developed by the Authors. The results of the comparative analysis show that the parameters of PID controller (proportional-integral-differential) need to adjust according to the operating modes of the diesel engine. The stability of the rotational speed was achieved, developed by the microprocessor regulator at various steady speed modes, not exceed 5%. It was found that the values of the engine speed deviation and the duration of transients as good as using a serial mechanical regulator.

This is a preview of subscription content, log in via an institution to check access.

Access this chapter

Chapter
USD 29.95
Price excludes VAT (USA)
  • Available as PDF
  • Read on any device
  • Instant download
  • Own it forever
eBook
USD 169.00
Price excludes VAT (USA)
  • Available as EPUB and PDF
  • Read on any device
  • Instant download
  • Own it forever
Softcover Book
USD 219.99
Price excludes VAT (USA)
  • Compact, lightweight edition
  • Dispatched in 3 to 5 business days
  • Free shipping worldwide - see info
Hardcover Book
USD 219.99
Price excludes VAT (USA)
  • Durable hardcover edition
  • Dispatched in 3 to 5 business days
  • Free shipping worldwide - see info

Tax calculation will be finalised at checkout

Purchases are for personal use only

Institutional subscriptions

Similar content being viewed by others

References

  1. Aleksandrov, A.A., Ivashchenko, N.A.: Encyclopedia, vol. 4. Internal combustion engines [“Entsiklopediya. Tom IV. Dvigateli vnutrennego sgoraniya”]. Machine Building, Moscow (2013)

    Google Scholar 

  2. Wargula, L., Krawiec, P.: The research on the characteristic of the cutting force while chipping of the Caucasian Fir (Abies Nordmanniana) with a single-shaft wood chipper. IOP Conf. Ser. Mater. Sci. Eng. 776 (2020). https://doi.org/10.1088/1757-899X/776/1/012012

  3. Krutov, V.I.: Automatic control and management of internal combustion engines [“Avtomaticheskoe regulirovanie i upravlenie dvigateley vnutrennego sgoraniya”]. Machine Building, Moscow (1989)

    Google Scholar 

  4. Heywood, J.B.: Internal Combustion Engine Fundamentals, 2nd edn. McGraw-Hill Education, New York (2018)

    Google Scholar 

  5. Rimkus, A., Pukalskas, S., Matijošius, J., Sokolovskij, E.: Betterment of ecological parameters of a diesel engine using Brown’s gas. J. Environ. Eng. Landsc. Manag. 21(2), 133–140 (2012). https://doi.org/10.3846/16486897.2012.679661

    Article  Google Scholar 

  6. Markov, V.A., Furman, V.V., Bebenin, E.V.: Improvement of diesel and gas-diesel engine speed control system [“Sovershenstvo-vaniye sistemy regulirovaniya chastoty vrashcheniya dizel’nogo i gazodizel’nogo dvigateley”]. Autogas Fuelling Complex + Altern. Fuel 4 (2016)

    Google Scholar 

  7. Denisenko, V.V.: PID-controllers: the issues of realization [“PID-regulyatory: voprosy realizatsii”]. Mod. Autom. Technol. 4, 60–65 (2007)

    Google Scholar 

  8. Kutrubas, V.A., Sycheva, E.E.: Effective PID controller [“Effektivnyy PID- regulyator”]. Ind. ACS Controllers 5, 60–65 (2013)

    Google Scholar 

  9. Wahlström, J., Eriksson, L., Nielsen, L., Pettersson, M.: PID controllers and their tuning for EGR and VGT control in diesel engines. IFAC Proc. Vol. 38(1), 212–217 (2005). https://doi.org/10.3182/20050703-6-CZ-1902.01923

    Article  Google Scholar 

  10. Kwiatkowski, A., Werner, H., Blath, J.P., Ali, A., Schultalbers, M.: Linear parameter varying PID controller design for charge control of a spark-ignited engine. Control Eng. Pract. 17(11), 1307–1317 (2009). https://doi.org/10.1016/j.conengprac.2009.06.005

    Article  Google Scholar 

  11. Markov, V.A., Pozdnyakov, E.F., Furman, V.V., Plakhov, S.V.: Simulation of the diesel engine rotational speed automatic control system. Proc. High. Educ. Inst. Маch. Build. 7(712), 35–46 (2019). https://doi.org/10.18698/0536-1044-2019-7-35-46

    Article  Google Scholar 

  12. Kostritsya, S.V.: The choice of rational parameters and the development of electronic speed regulator of the diesel engine [“Vibir ratsionalnih parametriv i rozrobka elektronnogo regulyatora chastoti obertannya dizelya”]. National Transport University, Kyiv (2014)

    Google Scholar 

  13. Heinzmann: Basic information on digital control [“Bazovaya informatciya po tcufrovomu upravleniu”]. DG 95–105, Kyiv (1997)

    Google Scholar 

  14. Heinzmann: Basic digital system Pandaros II [“Tcufrovue regulyatoru skorosty”]. DG 95-105, Kyiv (1997)

    Google Scholar 

  15. Heinzmann: Digital speed controllers [“Tcufrovue regulyatoru skorosty”]. DG 95-105, Kyiv (1997)

    Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Alfredas Rimkus .

Editor information

Editors and Affiliations

Rights and permissions

Reprints and permissions

Copyright information

© 2022 The Author(s), under exclusive license to Springer Nature Switzerland AG

About this paper

Check for updates. Verify currency and authenticity via CrossMark

Cite this paper

Lisoval, A., Rimkus, A. (2022). Research of Automatic Rotational Frequency Control Systems of Automobile Diesel Engine. In: Prentkovskis, O., Yatskiv (Jackiva), I., Skačkauskas, P., Junevičius, R., Maruschak, P. (eds) TRANSBALTICA XII: Transportation Science and Technology. TRANSBALTICA 2019. Lecture Notes in Intelligent Transportation and Infrastructure. Springer, Cham. https://doi.org/10.1007/978-3-030-94774-3_31

Download citation

  • DOI: https://doi.org/10.1007/978-3-030-94774-3_31

  • Published:

  • Publisher Name: Springer, Cham

  • Print ISBN: 978-3-030-94773-6

  • Online ISBN: 978-3-030-94774-3

  • eBook Packages: EngineeringEngineering (R0)

Publish with us

Policies and ethics