Abstract
It is observed that structure cab me made adaptive so as to have better performance. The structure can behave efficiently by having adaptive and responsive properties. SMA-Shape Memory Alloy belongs to a smart materials family which can sense the change and activate its special properties. These SMA-shape memory alloys have very high recovery capacity which in term needed for active/passive vibration control. In this study, the response of plate with SMA is observed under loading, unloading cycling. Hence, the steel and NiTi plate analysis is performed to compare the residual deflection after loading and unloading. The reference maximum deflection is categorized depending upon dimension of steel plate. Incremental load is applied to attain the maximum deflection. Further loading and unloading is done with same incremental and decrease in loads. The maximum and residual deflection of both steel and NiTi plates is compared and results are presented through graphs and tables.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Tanaka, K., Nagaki, S.: A thermomechanical description of materials with internal variables in the process of phase transitions. Archive App. Mech. 51(5), 287–299 (1982)
Tanaka, K.: A thermomechanical sketch of shape memory effect: one dimensional tensile behaviour. Mater. Sci. Res. Int. 18, 251–263 (1985)
Liang, C., Rogers, C.A.: One-dimensional thermomechanical constitutive relations for shape memory materials. J. Intell. Mater. Syst. Struct. 1(2), 207–234 (1990). https://doi.org/10.1177/1045389X9000100205
Brinson, L.: One-dimensional constitutive behaviour of shape memory alloys: thermomechanical derivation with non-constant material functions and redefined martensite internal variable. J. Intell. Mater. Syst. Struct. 4, 229–242 (1993)
Auricchio, F.: A robust integration-algorithm for a finite-strain shape-memory-alloy. Int. J. Plast. 17(7), 971–990 (2001)
Murasawa, G., Yoneyama, S., Sakuma, T., Takashi, M.: Influence of cyclic loading on inhomogeneous deformation behavior arising in NiTi shape memory alloy plate. Mater. Trans. 47(3), 780–786 (2006). https://doi.org/10.2320/matertrans.47.780
Fawzia, A., Riadh, A., Zhao, X.: Experimental and finite element analysis of a double strap joint between steel plates and normal modulus CFRP. Sabrina Compos. Struct. 75, 156–162 (2006)
Amini, M., Isaacs, J., Nemat, S.: Experimental investigation of response of monolithic and bilayer plates to impulsive loads. Int. J. Impact. Eng. 3(7), 82–89 (2010)
Yen, J., Chien, H.: Steel plates rehabilitated RC beam–column joints subjected to vertical cyclic loads. Constr. Build. Mater. 24, 332–339 (2010)
Ye, H., Christian, K., Ummenhofer, T., Shizhong, Q., Plum, R.: Fatigue performance of tension steel plates strengthened with prestressed CFRP laminates. J. Compos. Constr. 14(5), 609–615 (2010). https://doi.org/10.1061/(ASCE)CC.1943-5614.0000111
Bajoria, K.M., Wankhade, R.L.: Free vibration of simply supported piezolaminated composite plates using finite element method. Adv. Mater. Res. 587, 52–56 (2012)
Wankhade, R.L., Bajoria, K.M.: Stability of simply supported smart piezolaminated composite plates using finite element method. In: Proceedings of International Conference Advance Aeronautical Mechanical Engineering AME, pp. 14–19 (2012)
Shariat, B., Liu, Y., Meng, Q., Rio, G.: ‘Analytical modelling of functionally graded NiTi shape memory alloy plates under tensile loading and recovery of deformation upon heating. Acta Mater. 61, 3411–3421 (2013)
Wankhade, R., Bajoria, K.M.: Free vibration and stability analysis of piezolaminated plates using finite element method Smart. Mater. Struct. 22(125040), 1–10 (2013)
Wankhade, R.L., Bajoria, K.M.: Buckling analysis of piezolaminated plates using higher order shear deformation theory. Int. J. Compos. Mater. 3, 92–99 (2013)
Wankhade, R.L., Bajoria, K.M.: Vibration of cantilever piezolaminated beam with extension and shear mode piezo actuators. Active. Passive. Smart. Struct. Integr. Syst. Proc. SPIE. 9431, 943122–943131 (2015)
Rasid, Z.A., Zahari, R., Ayob, A.: The instability improvement of the symmetric angle-ply and cross-ply composite plates with shape memory alloy using finite element method. Adv. Mech. Eng. 6, 632825 (2014). https://doi.org/10.1155/2014/632825
Samadpour, M., Sadighi, M., Shakeri, M., Zamani, H.: Vibration analysis of thermally buckled SMA hybrid composite sandwich plate. Compos. Struct. 119, 251–263 (2015)
Wankhade, R.L., Bajoria, K.M.: Shape control and vibration analysis of piezolaminated plates subjected to electro-mechanical loading. Open J. Civ. Eng. 6, 335–345 (2016)
Bajoria, K.M., Wankhade, R.L.: Vibration of cantilever piezolaminated beam with extension and shear mode piezo actuators. Proc. SPIE. 9431(943122), 1–6 (2015)
Dehkordi, B., Khalili, S.: Frequency analysis of sandwich plate with active SMA hybrid composite face-sheets and temperature dependent flexible core. Compos. Struct. 123, 408–419 (2015)
Shahverdi, M., Czaderski, C., Motavalli, M.: Iron-based shape memory alloys for prestressed near-surface mounted strengthening of reinforced concrete beams. Constr. Build. Mater. 112, 28–38 (2016)
Bendine, K., Wankhade, R.L.: Vibration control of FGM piezoelectric plate based on LQR genetic search. Open J. Civ. Eng. 6, 1–7 (2016)
Wankhade, R.L., Bajoria, K.M.: Shape control and vibration analysis of piezolaminated plates subjected to electro-mechanical loading, open. Open J. Civ. Eng. 6, 335–345 (2016)
Mahabadi, K., Shakeri, M., Pazhooh, D.: Free vibration of laminated composite plate with shape memory alloy fibers. Latin Am. J. Solids Struct. 13(2), 314–330 (2016). https://doi.org/10.1590/1679-78252162
Wankhade, R.L., Bajoria, K.M.: Numerical optimization of piezolaminated beams under static and dynamic excitations. J. Sci. Adv. Mater. Dev. 2(2), 255–262 (2017)
Bendine, K., Wankhade, R.L.: Optimal shape control of piezolaminated beams with different boundary condition and loading using genetic algorithm. Int. J. Adv. Struct. Eng. 9(4), 375–384 (2017). https://doi.org/10.1007/s40091-017-0173-x
Izadi, M.R., Ghafoori, E., Shahverdi, M., Motavalli, M., Maalek, S.: Development of an iron-based shape memory alloy (Fe-SMA) strengthening system for steel plates. Eng. Struct. 174, 433–446 (2018). https://doi.org/10.1016/j.engstruct.2018.07.073
Shahverdi, M., Michels, J., Czaderski, C., Motavalli, M.: Iron-based shape memory alloy strips for strengthening RC members: material behavior and characterization. Constr. Build. Mater. 173, 586–599 (2018)
Wankhade, R.L., Bajoria, K.M.: Vibration analysis of piezolaminated plates for sensing and actuating applications under dynamic excitation. Int. J. Struct. Stab. Dyn. 19(10), 1950121 (2019)
Yang, B., Soares, G., Wang, D.: Dynamic ultimate compressive strength of simply supported rectangular plates under impact loading. Mar. Struct. 66, 258–271 (2019)
Chang, M., Wang, Z., Liang, W., Sun, M.: A novel failure analysis of SMA reinforced composite plate based on a strain-rate-dependent model: low-high velocity impact. J. Mater. Res. Technol. 8(1), 812–826 (2019). https://doi.org/10.1016/j.jmrt.2018.06.012
Wankhade, R.L., Niyogi, S.B.: Buckling analysis of symmetric laminated composite plates for various thickness ratios and modes. Innov. Infrastruct. Solut. 5(3), 1–12 (2020). https://doi.org/10.1007/s41062-020-00317-8
Joaquin, G., Pinilla, R., Montoya-Coronado, L.A., Ribas, C., Cladera, A.: Finite element modeling of RC beams externally strengthened with iron-based shape memory alloy (Fe-SMA) strips, including analytical stress-strain curves for Fe-SMA. Eng. Struct. 223, 111152 (2020). https://doi.org/10.1016/j.engstruct.2020.111152
Wankhade, R.L., Bajoria, K.M.: Vibration attenuation and dynamic control of piezolaminated plates for sensing and actuating applications. Arch. Appl. Mech. 91(1), 411–426 (2021)
Wankhade, R.L., Niyogi, S., Gajbhiye, P.: Buckling analysis of laminated composites considering the effect of orthotropic material. IOP Sci. J. Phys. Conf. Ser. 1706(1), 012188 (2021)
Bendine, K., Wankhade, R.L.: Piezoelectric energy harvesting from a curved plate subjected to time-dependent loads using finite elements. IOP Sci. J. Phys. Conf. Ser. 1706(1), 012008 (2021)
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2022 The Author(s), under exclusive license to Springer Nature Switzerland AG
About this paper
Cite this paper
Jadhav, R., Wankhade, R.L. (2022). Thermo-mechanical Modeling and Analysis of Adaptive NiTi Shape Memory Alloy Plates. In: Khang, N.V., Hoang, N.Q., Ceccarelli, M. (eds) Advances in Asian Mechanism and Machine Science. ASIAN MMS 2021. Mechanisms and Machine Science, vol 113. Springer, Cham. https://doi.org/10.1007/978-3-030-91892-7_89
Download citation
DOI: https://doi.org/10.1007/978-3-030-91892-7_89
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-91891-0
Online ISBN: 978-3-030-91892-7
eBook Packages: EngineeringEngineering (R0)