Abstract
Lattice structures have many outstanding properties, and their use in diversified industrial and biomedical fields is widely studied. The advent of additive manufacturing (AM) technologies has further pushed the design of these cellular structures allowing for the fabrication of complex trusses and tailored local geometries. However, geometrical defects introduced by the AM process into printed lattice structures significantly affect their mechanical properties. In this work, the effect of chemical post-processing on the compressive properties of FDM-PLA strut-and-node-based lattice structures is evaluated. A UV resin has been used as a coating film on samples fabricated using Simple Cubic (SC) and Face-Centered Cubic (FCC) unit cells. Results demonstrated a 65% increase in compressive strength for SC unit cells and a 12% increase for FCC unit cells with respect to as-printed samples. Resin coating demonstrated to represent an effective approach to minimize defects of strut-and-node-based lattice structures, thus enhancing mechanical properties.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Syam, W.P., Wu, J.W., Zhao, B., Maskery, I., Elmadih, W., Leach, R.: Design and analysis of strut-based lattice structures for vibration isolation. Precis. Eng. 52, 494–506 (2018)
Pan, C., Han, Y.F., Lu, J.P.: Design and optimization of lattice structures: a review. Appl. Sci.-Basel 10, 6374 (2020)
Kumbhar, N.N., Mulay, A.V.: Post processing methods used to improve surface finish of products which are manufactured by additive manufacturing technologies: a review. J. Inst. Eng. (India): Ser. C 99(4), 481–487 (2016). https://doi.org/10.1007/s40032-016-0340-z
Chohan, J.S., Singh, R.: Pre and post processing techniques to improve surface characteristics of FDM parts: a state of art review and future applications. Rapid Prototyping J. 23, 495–513 (2017)
Wickramasinghe, S., Do, T., Tran, P.: FDM-based 3D printing of polymer and associated composite: a review on mechanical properties, defects and treatments. Polymers-Basel 12, 1529 (2020)
Zhu, J., Chen, J.L., Lade, R.K., Suszynski, W.J., Francis, L.F.: Water-based coatings for 3D printed parts. J. Coat. Technol. Res. 12(5), 889–897 (2015). https://doi.org/10.1007/s11998-015-9710-3
Lee, K.M., Park, H., Kim, J., Chun, D.M.: Fabrication of a superhydrophobic surface using a fused deposition modeling (FDM) 3D printer with poly lactic acid (PLA) filament and dip coating with silica nanoparticles. Appl. Surf. Sci. 467, 979–991 (2019)
Leite, M., Varanda, A., Ribeiro, A.R., Silva, A., Vaz, M.F.: Mechanical properties and water absorption of surface modified ABS 3D printed by fused deposition modelling. Rapid Prototyping J. 24, 195–203 (2018)
Miguel, M., Leite, M., Ribeiro, R., Deus, A.M., Reis, L., Vaz, M.F.: Failure of polymer coated nylon parts produced by additive manufacturing. Eng. Fail. Anal. 101, 485–492 (2019)
Barone, S., Neri, P., Orsi, S., Paoli, A., Razionale, A.V., Tamburrino, F.: Two coatings that enhance mechanical properties of fused filament-fabricated carbon-fiber reinforced composites. Addit. Manuf. 32, 101105 (2020)
Vicente, C.M.S., Fernandes, J., Reis, L., de Deus, A.M., Vaz, M.F., Leite, M.: Effect of protective coatings on the water absorption and mechanical properties of 3D printed PLA. Frattura Ed Integrita Strutturale 13, 748–756 (2019)
Tamburrino, F., Graziosi, S., Bordegoni, M.: The design process of additively manufactured mesoscale lattice structures: a review. J. Comput. Inf. Sci. Eng. 18, 6374 (2018)
Latture, R.M., Rodriguez, R.X., Holmes, L.R., Zok, F.W.: Effects of nodal fillets and external boundaries on compressive response of an octet truss. Acta Mater. 149, 78–87 (2018)
Ashby, M.F.: The properties of foams and lattices. Philos. Trans. R. Soc. A 364, 15–30 (2006)
Zok, F., Begley, M., Latture, R.: Design and performance of periodic trusses. In: Proceedings of the IUTAM Symposium Architectured Materials Mechanics, pp. 1–2. Purdue University Libraries Scholarly Publishing Services (2018)
Portela, C.M., Greer, J.R., Kochmann, D.M.: Impact of node geometry on the effective stiffness of non-slender three-dimensional truss lattice architectures. Extreme Mech. Lett. 22, 138–148 (2018)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2022 The Author(s), under exclusive license to Springer Nature Switzerland AG
About this paper
Cite this paper
Barone, S., Neri, P., Paoli, A., Razionale, A.V., Tamburrino, F. (2022). Effects of Coating Post-processing on the Compressive Properties of Strut-and-Node-Based FDM Lattice Structures. In: Rizzi, C., Campana, F., Bici, M., Gherardini, F., Ingrassia, T., Cicconi, P. (eds) Design Tools and Methods in Industrial Engineering II. ADM 2021. Lecture Notes in Mechanical Engineering. Springer, Cham. https://doi.org/10.1007/978-3-030-91234-5_45
Download citation
DOI: https://doi.org/10.1007/978-3-030-91234-5_45
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-91233-8
Online ISBN: 978-3-030-91234-5
eBook Packages: EngineeringEngineering (R0)