Abstract
Displacement amplification ratio and input stiffness modeling of three types of piezoelectric displacement amplifiers (PDAs) were investigated in this paper. The main feature is that we further improved the accuracy of matrix displacement model (MDM) by setting a node on both input and output points, and simplified modeling process of the MDM by utilizing axial symmetry of PDAs. Firstly, we deduced the stiffness matrix of the flexure element based on the general flexure hinge’s compliance formulas. Then, we established the MDM of a PDA by discretizing a displacement amplifier into flexure elements and assembling element stiffness matrices. The finite element method was employed to verify the superiority of presented model and to compare with typical analytical models and conventional MDMs. The results show that the presented model of both the displacement amplification ratio and input stiffness has better accuracy on the whole, thanks to consider deformation of both the input and output points during modeling and abandons considering input and output ends as a lumped mass.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Wang, R.Z., Zhang, X.M.: Parameters optimization and experiment of a planar parallel 3-DOF nanopositioning system. IEEE Trans. Industr. Electron. 65(3), 2388–2397 (2016)
Chen, W.L., Lu, Q.H., Zhang, X.M., et al.: A novel compression-based compliant orthogonal displacement amplification mechanism for the typical actuators used in micro-grasping. Sens. Actuators A 297, 111463 (2019)
Wang, Z.W., Zhang, X.M., Yin, Z.Q.: Design and stiffness modeling of a compact 3-dof compliant parallel nanopositioner for the tool servo of the ultra precision machining. In: 2018 IEEE International Conference on Robotics and Biomimetics, pp. 964–971. IEEE (2018)
Chen, F.X., Zhang, Q.J., Gao, Y.Z., et al.: A Review on the flexure-based displacement amplification mechanisms. IEEE Access 8, 205919–205937 (2020)
Lobontiu, N., Garcia, E.: Analytical model of displacement amplification and stiffness optimization for a class of flexure-based compliant mechanisms. Comput. Struct. 81(32), 2797–2810 (2003)
Xu, Q.S., Li, Y.M.: Analytical modeling, optimization and testing of a compound bridge-type compliant displacement amplifier. Mech. Mach. Theory 46(2), 183–200 (2011)
Qi, K.Q., Xiang, Y., Fang, C., et al.: Analysis of the displacement amplification ratio of bridge-type mechanism. Mech. Mach. Theory 87, 45–56 (2015)
Ling, M., Cao, J., Zeng, M., et al.: Enhanced mathematical modeling of the displacement amplification ratio for piezoelectric compliant mechanisms. Smart Mater. Struct. 25(7), 075022 (2016)
Liu, P., Peng, Y.: Kinetostatic modeling of bridge-type amplifiers based on Timoshenko beam constraint model. Int. J. Precis. Eng. Manuf. 19(9), 1339–1345 (2018)
Zhang, Q., Zhao, J., Peng, Y., et al.: A novel amplification ratio model of a decoupled XY precision positioning stage combined with elastic beam theory and Castigliano’s second theorem considering the exact loading force. Mech. Syst. Signal Process. 136, 106473 (2020)
Wang, H., Zhang, X.M.: Input coupling analysis and optimal design of a 3-DOF compliant micro-positioning stage. Mech. Mach. Theory 43(4), 400–410 (2008)
Ling, M.X., Cao, J.Y., Howell, L.L., et al.: Kinetostatic modeling of complex compliant mechanisms with serial-parallel substructures: a semi-analytical matrix displacement method. Mech. Mach. Theory 125, 169–184 (2018)
Ling, M.X.: A general two-port dynamic stiffness model and static/dynamic comparison for three bridge-type flexure displacement amplifiers. Mech. Syst. Signal Process. 119, 486–500 (2019)
Lobontiu, N.: Note: bending compliances of generalized symmetric notch flexure hinges. Rev. Sci. Instrum. 83(1), 249–253 (2012)
Bathe, K.J.: Finite Element Procedures. 2nd edn. Prentice Hall, New Jersey (2014)
Wu, Y.F., Zhou, Z.Y.: Design calculations for flexure hinges. Rev. Sci. Instrum. 73(8), 3101–3106 (2002)
Acknowledgements
This research was supported by the National Natural Science Foundation of China (Grant No. 52035013), the Guangdong Basic and Applied Basic Research Foundation (Grant No. 2021B1515020053 & 2021A1515012418).
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2021 Springer Nature Switzerland AG
About this paper
Cite this paper
Song, D., Zhu, B., Li, H., Zhang, X. (2021). Kinetostatic Modeling of Piezoelectric Displacement Amplifiers Based on Matrix Displacement Method. In: Liu, XJ., Nie, Z., Yu, J., Xie, F., Song, R. (eds) Intelligent Robotics and Applications. ICIRA 2021. Lecture Notes in Computer Science(), vol 13014. Springer, Cham. https://doi.org/10.1007/978-3-030-89098-8_39
Download citation
DOI: https://doi.org/10.1007/978-3-030-89098-8_39
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-89097-1
Online ISBN: 978-3-030-89098-8
eBook Packages: Computer ScienceComputer Science (R0)