Skip to main content

Fundamental Ideas About Intelligent Manufacturing Systems

  • 267 Accesses

Part of the Mechanisms and Machine Science book series (Mechan. Machine Science,volume 109)

Abstract

The current product quality and productivity-increasing trend are affected by time analysis of the entire manufacturing process. The primary requirement of manufacturing is to produce as many products as soon as possible. The production realizes at the lowest cost, but of course with the highest quality. Such requirements may be satisfied if all elements entering and affecting the production cycle are fully functional. The “Intelligent manufacturing system” it is a system that can respond to changes of internal and external processes status.

Keywords

  • Intelligent manufacturing systems
  • Manufacturing process
  • Control system

This is a preview of subscription content, access via your institution.

Buying options

Chapter
USD   29.95
Price excludes VAT (USA)
  • DOI: 10.1007/978-3-030-88465-9_34
  • Chapter length: 8 pages
  • Instant PDF download
  • Readable on all devices
  • Own it forever
  • Exclusive offer for individuals only
  • Tax calculation will be finalised during checkout
eBook
USD   44.99
Price excludes VAT (USA)
  • ISBN: 978-3-030-88465-9
  • Instant PDF download
  • Readable on all devices
  • Own it forever
  • Exclusive offer for individuals only
  • Tax calculation will be finalised during checkout
Hardcover Book
USD   59.99
Price excludes VAT (USA)
Fig. 34.1

References

  1. Holubek, R., Delgado Sobrino, D.R., Košťál, P., Oravcova, J.: Incorporation, programming and use of an ABB robot for the operations of palletizing and despalletizing at an academic-research oriented intelligent manufacturing cell. Appl. Mech. Mater. 309, 62–68 (2013)

    CrossRef  Google Scholar 

  2. Danišová, N., Velíšek, K.: Intelligent manufacturing and assembly system. In: Monograph machine design 2007: On the occasion of 47th anniversary of the Faculty of Technical Sciences: 1960–2007, pp. 413–416 (2007)

    Google Scholar 

  3. Košťál, P., Velíšek, K.: Flexible manufacturing system. World Acad. Sci. Eng. Technol. 77, 825–829 (2011)

    Google Scholar 

  4. Horváth, Š, Hrušková, E., Mudriková, A.: Areas in flexible manufacturing-assembly cell. Ann. Fac. Eng. Hunedoara 6(3), 123–127 (2008)

    Google Scholar 

  5. Meziane, F., Vadera, S., Kobbacy, K., & Proudlove, N. (2000). Intelligent systems in manufacturing: current developments and future prospects. Integr. Manuf. Syst.

    Google Scholar 

  6. Cselenyi, J., Shmidt, L., Kovács, G.: Evaluation methods of storage capacity between manufacturing levels of eees at changing product structure. In. Proceedings of the International Scientific Conference microCAD 2002, pp. 63–71. Miskolc (2002)

    Google Scholar 

  7. Kovács, G.: Methods for efficiency improvement of production and logistic processes. Res. Pap. Fac. Mater. Sci. Technol. Slovak Univ. Technol. 26(42), 55–61 (2018)

    Google Scholar 

  8. Varga, G., Dudas, I.: Caмoopгaнизyющиecя пpoизвoдcтвeнныe cиcтeмы c тoчки зpeния пpoизвoдcтвa cлoжныx пoвepxнocтныx пap. Пpoблeмы Maшинocтpoeния и Aвтoмaтизaции 3, 39–44 (2009)

    Google Scholar 

  9. Košťál, P., Mudriková, A., Kerak, P.: Clamping fixture for new paradigms of manufacturing. In: Proceedings of the 21st International DAAAM Symposium: Intelligent Manufacturing & Automation: Focus on Interdisciplinary Solutions, pp. 361–362. DAAAM International, Vienna (2010)

    Google Scholar 

  10. Chituc, C., José Restivo, F.: Challenges and Trends in Distributed Manufacturing Systems: Are Wise Engineering Systems the Ultimate Answer? Massachusetts, Cambridge (2009)

    Google Scholar 

Download references

Acknowledgements

This publication has been written thanks to support of the research project ERASMUS+ Programme—Strategic Partnership: “Development of mechatronics skills and innovative learning methods for Industry 4.0”, project Nr: 2019-1-RO01-KA203-063153.

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Peter Košťál .

Editor information

Editors and Affiliations

Rights and permissions

Reprints and Permissions

Copyright information

© 2022 The Author(s), under exclusive license to Springer Nature Switzerland AG

About this paper

Verify currency and authenticity via CrossMark

Cite this paper

Prajova, V., Košťál, P., Stan, SD., Václav, Š. (2022). Fundamental Ideas About Intelligent Manufacturing Systems. In: Rackov, M., Mitrović, R., Čavić, M. (eds) Machine and Industrial Design in Mechanical Engineering. KOD 2021. Mechanisms and Machine Science, vol 109. Springer, Cham. https://doi.org/10.1007/978-3-030-88465-9_34

Download citation

  • DOI: https://doi.org/10.1007/978-3-030-88465-9_34

  • Published:

  • Publisher Name: Springer, Cham

  • Print ISBN: 978-3-030-88464-2

  • Online ISBN: 978-3-030-88465-9

  • eBook Packages: EngineeringEngineering (R0)