Abstract
The large amount and different types of data and knowledge generated within the Additive Manufacturing (AM) value chain are highly challenging in terms of management and organization. Understanding the interconnections between all these immaterial corpuses is important for decision making and process optimization issues. Moreover, AM has more parameters than conventional manufacturing processes, and many of these parameters are difficult to assess and monitor. Therefore, it becomes important to develop computer-based solutions that are able to aid the decision maker and to support the management of all information along the AM value chain. In this paper, a knowledge-based decision support framework using ontological models and mechanisms is proposed for the above objective. Cost estimation is conducted as an application of the proposed framework.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Negi, S., Dhiman, S., Sharma, R.K.: Basics, applications and future of additive manufacturing technologies: a review. J. Manuf. Technol. Res. 5(1/2), 75 (2013)
Al-Meslemi, Y., Anwer, N., Mathieu, L.: Modeling key characteristics in the value chain of additive manufacturing. Procedia CIRP 70, 90–95 (2018)
Wang, Y., Zhong, R.Y., Xu, X.: A decision support system for additive manufacturing process selection using a hybrid multiple criteria decision-making method. Rapid Prototyping J. 24(9), 1544–1553 (2018)
Liu, X., Rosen, D.W.: Ontology based knowledge modeling and reuse approach of supporting process planning in layer-based additive manufacturing. In: 2010 International Conference on Manufacturing Automation, pp. 261–266 (2010)
Witherell, P.: Emerging Datasets and Analytics Opportunities in Metals Additive Manufacturing. In: Direct Digital manufacturing Conference (2018)
Kim, D.B., Witherell, P., Lipman, R., Feng, S.C.: Streamlining the additive manufacturing digital spectrum: a systems approach. Addit. Manuf. 5, 20–30 (2015)
Belkadi, F., Vidal, L.M., Bernard, A., Pei, E., Sanfilippo, E.M.: Towards an unified additive manufacturing product-process model for digital chain management purpose. Procedia CIRP 70, 428–433 (2018)
Gibson, I., Rosen, D., Stucker, B., Khorasani, M.: Additive Manufacturing Technologies, vol. 17, p. 195. Springer, New York (2014)
Merkert, J., Mueller, M., Hubl, M.: A Survey of the Application of Machine Learning in Decision Support Systems. ECIS Completed Research Papers, Paper 133 (2015)
Sanfilippo, E.M., Belkadi, F., Bernard, A.: Ontology-based knowledge representation for additive manufacturing. Comput. Ind. 109, 182–194 (2019)
Li, B.M., Xie, S.Q., Xu, X.: Recent development of knowledge-based systems, methods and tools for one-of-a-kind production. Knowl.-Based Syst. 24(7), 1108–1119 (2011)
Ghazy, M.M.: Development of an additive manufacturing decision support system (AMDSS). Newcastle University. NE1 7RU, United Kingdom. PhD thesis (2012).
Meski, O., Belkadi, F., Laroche, F., Ritou, M., Furet, B.: A generic knowledge management approach towards the development of a decision support system. Int. J. Prod. Res. 1–18 (2020). https://doi.org/10.1080/00207543.2020.1821930
Eddy, D., Krishnamurty, S., Grosse, I., Perham, M., Wileden, J., Ameri, F.: Knowledge management with an intelligent tool for additive manufacturing. In: Proceedings of ASEM International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, vol. 57045, p. V01AT02A023 (2015)
Kim, S., Rosen, D. W., Witherell, P., Ko, H.: A design for additive manufacturing ontology to support manufacturability analysis. J. Comput. Inf. Sci. Eng. 19(4), 1–10 (2019). https://doi.org/10.1115/1.4043531
Hagedorn, T.J., Krishnamurty, S., Grosse, I.R.: A knowledge-based method for innovative design for additive manufacturing supported by modular ontologies. J. Comput. Inf. Sci. Eng. 18(2), 1–12 (2018). https://doi.org/10.1115/1.4039455
Kadir, A.Z.A., Yusof, Y., Wahab, M.S.: Additive manufacturing cost estimation models—a classification review. Int. J. Adv. Manuf. Technol. 107(9), 4033–4053 (2020)
Barclift, M., Joshi, S., Simpson, T., Dickman, C.: Cost modeling and depreciation for reused powder feedstocks in powder bed fusion additive manufacturing. In: Solid Free Fabers Symposium, pp. 2007–2028 (2016)
Acknowledgement
The presented results were conducted within the French national project “SOFIA” (SOlution pour la Fabrication Industrielle Additive métallique). This project has received the support from the French Public Investment Bank (Bpifrance) and the French National Center for Scientific Research (CNRS). The authors would like to thank all industrial and academic partners for their involvement in this research.
Author information
Authors and Affiliations
Corresponding authors
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2021 IFIP International Federation for Information Processing
About this paper
Cite this paper
Jarrar, Q., Belkadi, F., Bernard, A. (2021). A Knowledge-Based Approach for Decision Support System in Additive Manufacturing. In: Dolgui, A., Bernard, A., Lemoine, D., von Cieminski, G., Romero, D. (eds) Advances in Production Management Systems. Artificial Intelligence for Sustainable and Resilient Production Systems. APMS 2021. IFIP Advances in Information and Communication Technology, vol 634. Springer, Cham. https://doi.org/10.1007/978-3-030-85914-5_34
Download citation
DOI: https://doi.org/10.1007/978-3-030-85914-5_34
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-85913-8
Online ISBN: 978-3-030-85914-5
eBook Packages: Computer ScienceComputer Science (R0)