Abstract
The presented paper points to the use of available devices of wearable electronics for people with epilepsy to increase safety in the work process. The essence of the device is the detection of a change in the acceleration of the wrist movement of the person being monitored and, in the case of the development of an epileptic seizure, the identification of a repeated change in the acceleration of the wrist movement of the person being monitored. Subsequently, after evaluation in the analytical element, this information is sent to people in the vicinity or to a third party to assist the person being monitored. The proposed technical solution in the form of a digital device is usable not only for epileptic seizures but also for other diseases with the potential for loss of stability and subsequent injury.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Balážiková, M., Sinay, J., Dulebová, M., Markulik, Š, Kotianová, Z.: Measurement of low-frequency noise during CNC machining and its assessment. Measurement 119, 190–195 (2018). ISSN 0263-2241
Pačaiová, H., Nagyová, A., Markulik, Š.: BBS program (behavior based safety) - way to raising the level of health and safety in practice, 2012. - 1 electronic optical disc (CD-ROM). In: AHFE 2012 4th International Conference on Applied Human Factors and Ergonomics: 21–25. July 2012, San Francisco, pp. 2097–2104 (2012). ISBN 978-0-9796435-5-2
Pačaiová, H., Oravec, M., Šmelko, M., et al.: Extra low frequency magnetic fields of welding machines and personal safety. J. Electr. Eng.-Elektrotech. Casopis 69(6), 493–494 (2018)
Balážiková, M., Tomašková, M., Dulebová, M.: Assessment of ergomonic risk for firefighters. In: 2016. In: Production Management and Engineering Sciences, pp. 3–6. CRC Press/Balkema, Leiden (2016). ISBN 978-1-138-02856–2
Pačaiová, H., Kotianová, Z., Brestovič, T.: Modelling ammonia pipeline leakage for the proposed pipeline change. 2016. In: Production Management and Engineering Sciences. - Leiden : CRC Press/Balkema, pp. 509–515 (2016). ISBN 978-1-138-02856-2
Blist’an, P., Pačaiová, H.: Modelling environmental influence on the pipelines integrity. In: Conference: 11th International Multidisciplinary Scientific GeoConference, Albena, Bulgaria, 20–25 June 2011 (2011)
Nagyová, A., Balážiková, M., Markulik, Š.,Sinay, J., Pačaiová, H.: Implementation proposal of OH&S management system according to the standard ISODIS 45001. In: Arezes, P. (ed.) Advances in Intelligent Systems and Computing. AHFE 2017, vol. 604, pp. 472–485. Springer, Cham (2018). ISBN 978-3-319-60525-8
Markulik, Š., Kamenický, L.: How to transform the requirements into the management system? 2015. In: SGEM 2015, pp. 689–693. STEF92 Technology, Sofia (2015). ISBN 978-619-7105-40-7
Ovseník, Ľ., Turán, J., Huszaník, T., Oravec, J., Kováč, O., Oravec, M.: Image encryption algorithm with plaintext related chaining. In: Computing and Informatics: Computers and Artificial Intelligence, vol. 38, no. 3, pp. 647–678. Institute of Informatics, Bratislava (2019). ISSN 1335-9150
Veľas, A., Kutaj, M., Ďurovec, M.: Influence of changing the parameters of the camera system on video-based motion detection. In: ICCST 2017: 51st international carnahan conference on security technology: 23–26 October 2017, Madrid, Spain. IEEE, New York (2017). ISBN 978-1-5386-1585-0. - [5]. (International carnahan conference on security technology proceedings. - ISSN 1071-6572)
Boroš, M., Kutaj, M., Mariš, L., Veľas, A.: Development of security at the local level through practical students training. In: INTED 2018, 05–07 March 2018, Spain/INTED 2018: Proceedings from 12th International Technology, Education and Development Conference, Valencia, 5th–7th March 2018, pp. 725–729. IATED Academy, Valencia (2018). ISBN 978-84-697-9480-7. ISSN 2340-1079
Boroš, M., Jasenčák, Ľ, Kutaj, M., Veľas, A.: The design of a testing device for passive infrared motion detectors. In: Brebbia, C.A., Garzia, F., Lombardi, M. (eds.) SAFE VII, 06–08 September 2017, Italy, Safety and Security Engineering VII, pp. 457–463. WIT Press, Southampton (2018). ISBN 978-1-78466-211-0. ISBN 978-1-78466-212-7
Veľas, A., Svetlík, J.: Design of equipment to improve safety on roads. In: Transport Means 2016: Proceedings of the 20th International Scientific Conference, 5–7 October 2016, Juodkrante, Lithuania, pp. 614–617. Kaunas University of Technology, Kaunas (2016). ISSN 1822-296X
Turisová, R., Sinay, J., Pačaiová, H., Kotianová, Z., Glatz, J.: Application of the EFQM model to assess the readiness and sustainability of the implementation of I4.0 in Slovakian companies. Sustainability. 12(14), 1–14 (2020). ISSN 2071-1050
Pačaiová, H., Sinay, J., Turisová, R., et al.: Measuring the qualitative factors on copper wire surface. Measurement 109, 359–365 (2017)
Balážiková, M., Andrejiová, M., Wysoczańská, B.: Methodology for risk assessment of noise effect at workplace. MM Sci. J. 3426–3430 (2019). ISSN 1803-1269
Sinay, J., Pačaiová, H., Oravec, M.: Present state of machinery safety assessment. In: Annals of DAAAM for & Proceedings of the International DAAAM Symposium (2005)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2021 The Author(s), under exclusive license to Springer Nature Switzerland AG
About this paper
Cite this paper
Glatz, J., Oravec, M., Kotianova, Z., Gorzas, M., Hijj, J., Habala, I. (2021). Digital Technologies for Monitoring the Vital Functions of Employees with Diseases Accompanied by Seizures with Loss of Balance. In: Goonetilleke, R.S., Xiong, S., Kalkis, H., Roja, Z., Karwowski, W., Murata, A. (eds) Advances in Physical, Social & Occupational Ergonomics. AHFE 2021. Lecture Notes in Networks and Systems, vol 273. Springer, Cham. https://doi.org/10.1007/978-3-030-80713-9_28
Download citation
DOI: https://doi.org/10.1007/978-3-030-80713-9_28
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-80712-2
Online ISBN: 978-3-030-80713-9
eBook Packages: EngineeringEngineering (R0)