Abstract
The foaming device can be used to carry out mass transfer and heat exchange processes between gas and liquid and for cleaning gases in the chemical, petrochemical, food, and related industries. A paper presented a combined contact device, which increases the efficiency of mass transfer, avoid clogging by creating a high-intensity, turbulized gas-liquid layer, which does not allow dispersed particles to accumulate on the sheets of the tray and stabilizer, provides a better dip of the liquid on the tray, with a significant decrease in the hydraulic resistance of the separation and mass transfer equipment. The article is considered a theoretical approach to defining the hydrodynamic performances of a combined contact device, determine critical gas mass value, at which the dynamic foam layer becomes unstable. The realization of the stabilization method of the gas-liquid layer greatly extends the scope of foaming devices and opens new possibilities for intensifying varied technological processes.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Atamanyuk, V., et al.: Diffusive mass transfer during drying of grinded sunflower stalks. Chem. Chem. Technol. 10(4), 460–463 (2016)
Semenyshyn, Y., Atamanyuk, V., Rymar, T., Ivashchuk, O., Hlukhaniuk, A.: Mass transfer in the solid-liquid system: mechanism and kinetics of the extraction process. Chem. Chem. Technol. 14(1), 121–128 (2020)
Fourati, M., Roig, V., Raynal, L.: Experimental study of liquid spreading in structured packings. Chem. Eng. Sci. 80, 1–15 (2012)
Pavlenko, A.N., et al.: Overview of methods to control the liquid distribution in distillation columns with structured packing: improving separation efficiency. Renew. Sustain. Energy Rev. 132, 110092 (2020)
Zbytovský, J., Sommer, T., Zapletal, M., Trejbal, J.: Comparison of various column packing materials efficiency for hydrocarbons and aqueous mixtures. Chem. Biochem. Eng. Q. 33(2), 183–190 (2019)
Sovilj, M., Nikolovski, B., Spasojevic, M., Mauhar, S.: Packed bed absorption column: hydrodynamics and mass transfer. Acta Periodica Technologica 50, 260–267 (2019)
Ochowiak, M., Włodarczak, S., Pavlenko, I., Janecki, D., Krupińska, A., Markowska, M.: Study on interfacial surface in modified spray tower. Processes 7(8), 532 (2019). https://doi.org/10.3390/pr7080532
Lukashov, V.K., Kostiuchenko, Y.V., Timofeev, S.V., Ochowiak, M.: An experimental study of heat and mass transfer in a falling liquid film evaporation into a crossflow of neutral gas. J. Eng. Sci. 7(1), F30–F38 (2020). https://doi.org/10.21272/jes.2020.7(1).f3
Qi, G., Wang, S.: Experimental study and rate-based modeling on combined CO2 and SO2 absorption using aqueous NH3 in packed column. Appl. Energy 206, 1532–1543 (2017)
Sklabinskyi, V., Liaposhchenko, O., Pavlenko, I., Lytvynenko, O., Demianenko, M.: Modelling of liquid’s distribution and migration in the fibrous filter layer in the process of inertial-filtering separation. In: Ivanov, V., et al. (eds.) DSMIE 2018. LNME, pp. 489–497. Springer, Cham (2019). https://doi.org/10.1007/978-3-319-93587-4_51
Fu, K., et al.: Experimental analyses of mass transfer and heat transfer of post-combustion CO2 absorption using hybrid solvent MEA-MeOH in an absorber. Chem. Eng. J. 260, 11–19 (2015)
Sema, T., et al.: Mass transfer of CO2 absorption in hybrid MEA-methanol solvents in packed column. Energy Procedia 37, 883–889 (2013)
Flagiello, D., Natale, F.D., Lancia, A., Erto, A.: Characterization of mass transfer coefficients and pressure drops for packed towers with Mellapak 250.X. Chem. Eng. Res. Design 161, 340–356 (2020)
Kong, Q.J., Liu, D.Y., Wang, P., Xie, D.Q., Wu, Q., Zhao, X.Y.: Experimental study on the heat and mass transfer characteristics of a counter-flow wet cooling tower with foam ceramic packing. Thermophys. Aeromech. 26(2), 267–279 (2019). https://doi.org/10.1134/S0869864319020100
Huang, S., Lv, Z., Zhang, X., Liang, C.: Experimental investigation on heat and mass transfer in heating tower solution regeneration using packing tower. Energy Buildings 164, 77–86 (2018)
Hanley, B., Chen, C.-C.: New mass-transfer correlations for packed towers. AIChE J. 58(1), 132–152 (2011)
Jac’imovic’, N., Genic’, S., Jac’imovic’, B.: Sizing of packed deaeration columns. Chem. Eng. Technol. 42(12), 2709–2716 (2019)
Ling, H., Liu, S., Wang, T., Gao, H., Liang, Z.: Characterization and correlations of CO2 absorption performance into aqueous amine blended solution of monoethanolamine (MEA) and N, N-dimethylethanolamine (DMEA) in a packed column. Energy Fuels 33(8), 7614–7625 (2019)
Liaposhchenko, O., Pavlenko, I., Demianenko, M., Starynskyi, O., Pitel, J. The methodology of numerical simulations of separation process in SPR-separator. In: CEUR Workshop Proceedings, vol. 2353, pp. 822–832 (2019)
Poortalari, H., Karimi Sabet, J., Varaminian, F.: Separation performance investigation of packed distillation columns using simple NEQ approach based on packing multicomponent efficiencies and effective mass transfer coefficients. Korean J. Chem. Eng. 35(5), 1151–1166 (2018). https://doi.org/10.1007/s11814-017-0315-7
Rejl, F.J., et al.: Liquid phase axial mixing in distillation column packed with structured packing: effect on column performance. Chem. Eng. Res. Des. 148, 129–141 (2019)
Mowla, A., Ioannidis, M.A.: Effect of particle wettability on the hydrodynamics of three-phase fluidized beds subject to foaming. Powder Technol. 374, 58–69 (2020)
Moiseev, V., Liaposhchenko, O., Trebuna, P., Manoilo, E., Khukhryanskiy, O.: Properties of heat and mass transfer processes in the tubular grids with the heat exchanger as a stabilizer. In: Ivanov, V., et al. (eds.) DSMIE 2019. LNME, pp. 795–804. Springer, Cham (2020). https://doi.org/10.1007/978-3-030-22365-6_79
Liaposhchenko, O., et al.: Improvement of parameters for the multi-functional oil-gas separator of ‘HEATER-TREATER’ type. In: ICIEA 2019, pp. 66–71. Waseda University, IEEE, Tokyo, Japan (2019)
Acknowledgment
All the results of the research were achieved within the projects “Development and Implementation of Energy Efficient Modular Separation Devices for Oil and Gas Purification Equipment” (State reg. No. 0117U003931), and “Creation of new granular materials for nuclear fuel and catalysts in the active hydrodynamic environment” (State reg. No. 0120U102036) ordered by the Ministry of Education and Science of Ukraine.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2021 The Author(s), under exclusive license to Springer Nature Switzerland AG
About this paper
Cite this paper
Moiseev, V., Liaposhchenko, O., Manoilo, E., Demianenko, M., Khukhryanskiy, O. (2021). Hydrodynamic Parameters of a Combined Contact Device. In: Ivanov, V., Pavlenko, I., Liaposhchenko, O., Machado, J., Edl, M. (eds) Advances in Design, Simulation and Manufacturing IV. DSMIE 2021. Lecture Notes in Mechanical Engineering. Springer, Cham. https://doi.org/10.1007/978-3-030-77823-1_26
Download citation
DOI: https://doi.org/10.1007/978-3-030-77823-1_26
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-77822-4
Online ISBN: 978-3-030-77823-1
eBook Packages: EngineeringEngineering (R0)