Abstract
Friction interfaces are commonly used in large-scale engineering systems for mechanical joints. They are known to significantly shift the resonance frequencies of the assembled structures due to softening effects and to reduce the vibration amplitude due to frictional energy dissipation between substructural components. It is also widely recognized that the geometrical characteristics of interface geometry have a significant impact on the nonlinear dynamical response of assembled systems. However, the full FE modeling approaches including these geometrical characteristics are extremely expensive. In this work, the influence of geometry of friction interfaces is investigated by using a multi-scale approach. It consists in integrating a semi-analytical contact solver into a high-fidelity nonlinear vibration solver. A highly efficient semi-analytical solver based on the boundary element method is used to obtain the pressure and gap distribution from the contact interface with different geometrical characteristics. The static pressure and gap distribution are then used as input for a nonlinear vibration solver to evaluate nonlinear vibrations of the whole assembled structure. The effectiveness of the methodology is shown on a realistic “Dogbone” test rig, which was designed to assess the effects of blade root geometries in a fan blade disk system. The friction joints with different interface profiles are then investigated. The obtained results show that the effects of the surface geometrical characteristics can have a significant impact on the damping and resonant frequency behavior of the whole assembly.
Keywords
- Friction interface
- Nonlinear vibration
- Multi-scale analysis
- Contact mechanics
- Nonlinear modal analysis
This is a preview of subscription content, access via your institution.
Buying options
Tax calculation will be finalised at checkout
Purchases are for personal use only
Learn about institutional subscriptionsReferences
Yuan, Y., Jones, A., Setchfield, R., Schwingshackl, C.W.: Robust design optimisation of underplatform dampers for turbine applications using a surrogate model. J. Sound Vib. 494, 115528 (2020)
Sun, Y., Yuan, J., Denimal, E. and Salles, L.: Nonlinear modal analysis of frictional ring damper for compressor Blisk. In: Turbo Expo: Power for Land, Sea, and Air. American Society of Mechanical Engineers (2020)
Armand, J., Salles, L., Schwingshackl, C.W., Süß, D., Willner, K.: On the effects of roughness on the nonlinear dynamics of a bolted joint: a multiscale analysis. Eur J Mech A Solid. 70, 44–57 (2018)
Petrov, E.P.: Direct parametric analysis of resonance regimes for nonlinear vibrations of bladed disks. J. Turbomach. 129(3), 495–502 (2006)
Krack, M., Tatzko, S., Panning-von Scheidt, L., Wallaschek, J.: Reliability optimization of friction-damped systems using nonlinear modes. J. Sound Vib. 333(13), 2699–2712 (2014)
Tang, W., Epureanu, B.I.: Geometric optimization of dry friction ring dampers. Int J Nonlinear Mech. 109, 40–49 (2019)
Panning, L., Sextro, W., Popp, K.: Optimization of the contact geometry between turbine blades and underplatform dampers with respect to friction damping. In: Proceedings of the ASME Turbo Expo 2002: Power for Land, Sea, and Air. Volume 4: Turbo Expo 2002, Parts A and B. Amsterdam, The Netherlands, pp. 991–1002
Gallego, L., Fulleringer, B., Deyber, S., Nelias, D.: Multiscale computation of fretting wear at the blade/disk interface. Tribol. Int. 43(4), 708–718 (2010)
Hüls, M., Panning-von Scheidt, L., Wallaschek, J.: Influence of geometric design parameters onto vibratory response and high-cycle fatigue safety for turbine blades with friction damper. J. Eng. Gas Turbines Power. 141(4) (2019)
Delaune, X., de Langre, E., Phalippou, C.: A probabilistic approach to the dynamics of wear tests. J. Trib. 122(4), 815–821 (2000)
Gastaldi, C., Berruti, T.M., Gola, M.M.: The effect of surface finish on the proper functioning of underplatform dampers. J. Vib. Acoust. 142(5) (2020)
Salles, L.C., Blanc, L., Thouverez, F., Gouskov, A.M., Jean, P.: Dynamic analysis of a bladed disk with friction and fretting-wear in blade attachments. ASME Turbo Expo 2009: Power for Land, Sea, and Air, Jun 2009, Orlando, vol. 48876, pp. 465–476 (2009)
Krack, M.: Nonlinear modal analysis of nonconservative systems: extension of the periodic motion concept. Comput. Struct. 154, 59–71 (2015)
Laxalde, D., Thouverez, F.: Complex non-linear modal analysis for mechanical systems: application to turbomachinery bladings with friction interfaces. J. Sound Vib. 322(4–5), 1009–1025 (2009)
Krack, M., Salles, L., Thouverez, F.: Vibration prediction of bladed disks coupled by friction joints. Arch Comput Methods Eng. 24(3), 589–636 (2017)
Schwingshackl, C.W., Zolfi, F., Ewins, D.J., Coro, A., Alonso, R.: Nonlinear friction damping measurements over a wide range of amplitudes. In: Proceedings of the international modal analysis conference XXVII, Orlando (2009)
Sun, Y., Vizzaccaro, A., Yuan, J., Salles, L.: An extended energy balance method for resonance prediction in forced response of systems with non-conservative nonlinearities using damped nonlinear normal mode. Nonlinear Dynamics. 103, 3315–3333 (2020)
Acknowledgments
The authors would like to acknowledge the financial support from the EPSRC under SYSDYMATS project, Grand Ref: EP/R032793/1.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2022 The Society for Experimental Mechanics, Inc
About this paper
Cite this paper
Yuan, J., Salles, L., Schwingshackl, C. (2022). Effects of the Geometry of Friction Interfaces on the Nonlinear Dynamics of Jointed Structure. In: Kerschen, G., Brake, M.R., Renson, L. (eds) Nonlinear Structures & Systems, Volume 1. Conference Proceedings of the Society for Experimental Mechanics Series. Springer, Cham. https://doi.org/10.1007/978-3-030-77135-5_7
Download citation
DOI: https://doi.org/10.1007/978-3-030-77135-5_7
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-77134-8
Online ISBN: 978-3-030-77135-5
eBook Packages: EngineeringEngineering (R0)