Abstract
It is necessary to prevent the surface oxide film peeling caused by sliding between workpiece and die material with high surface pressure for reducing punch load and preventing fracture. Hence, we have focused on the method to prevent the titanium surface oxide film peeling during press forming to prevent the adhesion. The workpieces with surface oxide film by atmospheric oxidation were utilized to demonstrate the effect of titanium surface oxide film on formability in deep drawing process. Additionally, the method to prevent adhesion during deep drawing process was developed. In this study, the compressed air was applied to the die and the blank holder force (BHF) with vibration technique was utilized during circular-cup deep-drawing of TP340 sheets. As a result, the occurrence of adhesion was prevented significantly by the application of developed methods.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Suzuki N, Sano T (2011) J Jpn Soc Technol Plast 52–604:579–583
Maeno T, Mori K, Yamashita Y, Nakayama M, Hamedon Z (2011) Proceedings of 2011 Japanese spring conference for the technology of plasticity, pp 345–346
Maeno T, Tomobe M, Mori K, Ikeda Y (2018) Proc Manuf 15:1149–1155
Suzuki N, Sano T (2010) Proceedings of 16th Japanese spring conference for the technology of plasticity, pp 115–116
Okude Y, Iwaoka T, Nakamura I (2018) Proceedings of 69th Japanese spring conference for the technology of plasticity, pp 107–108
Okude Y, Iwaoka T, Nakamura I (2018) Proceedings of 135th conference of Japan institute of light metals, pp 335–336
Acknowledgments
This work was supported by JSPS KAKENHI Grant Number 16K14442.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2021 The Minerals, Metals & Materials Society
About this paper
Cite this paper
Okude, Y., Iwaoka, T., Nakamura, I. (2021). Development of Adhesion Preventing Method During Deep Drawing of Titanium Alloy Sheets. In: Daehn, G., Cao, J., Kinsey, B., Tekkaya, E., Vivek, A., Yoshida, Y. (eds) Forming the Future. The Minerals, Metals & Materials Series. Springer, Cham. https://doi.org/10.1007/978-3-030-75381-8_227
Download citation
DOI: https://doi.org/10.1007/978-3-030-75381-8_227
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-75380-1
Online ISBN: 978-3-030-75381-8
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)