Skip to main content
SpringerLink
Log in

Improve the Energy Harvesting Alternatives Using the Bond Graph Approach for Powering Critical Autonomous Devices

  • Conference paper
  • First Online:
Digital Technologies and Applications (ICDTA 2021)

Part of the book series: Lecture Notes in Networks and Systems ((LNNS,volume 211))

Included in the following conference series:

Abstract

In this article, new modelling is proposed of both the piezoelectric harvester dynamics and vehicular seat suspension in accordance with the Bond Graph approach. However, a mathematical analysis has been performed to provide insights into which piezoelectric harvester parameters that highly broaden the energy harvesting potentiality. Furthermore, the conducted mechatronic modelling included the change in both driver load, suspension and piezoelectric parameters of the harvestable power magnitude, vehicle acceleration, suspension dynamic, and tire deflection. This proposed system has been investigated under wide broad banded road levels (parametric weight and measurement acceleration) via mechatronic estimation methodology over a piezoelectric harvester system to improved harvesting efficiencies in different road conditions. During the system simulations, a piezoelectric harvester (3 degrees-of-freedom) model is connected to vehicle suspension being excited by randomized Gaussian signal. The simulation results are in general accordance with expectations in the harvestable power interval versus the input excitation parameters, road profile rate, and piezoelectric properties.

This is a preview of subscription content, log in via an institution to check access.

Access this chapter

Log in via an institution
Chapter
USD 29.95
Price excludes VAT (USA)
  • Available as PDF
  • Read on any device
  • Instant download
  • Own it forever
eBook
USD 259.00
Price excludes VAT (USA)
  • Available as EPUB and PDF
  • Read on any device
  • Instant download
  • Own it forever
Softcover Book
USD 329.99
Price excludes VAT (USA)
  • Compact, lightweight edition
  • Dispatched in 3 to 5 business days
  • Free shipping worldwide - see info

Tax calculation will be finalised at checkout

Purchases are for personal use only

Institutional subscriptions

References

  1. Touairi S, Mabrouki M (2020) Optimization of energy harvesting system design by functional analysis. In: 1st international conference on innovative research in applied science, engineering and technology (IRASET), pp 1–6

    Google Scholar 

  2. Liu M, Gu F, Zhang Y (2017) Ride comfort optimization of in-wheel-motor electric vehicles with in-wheel vibration absorbers. Energies 10:1647. https://doi.org/10.3390/en10101647

    Article  Google Scholar 

  3. Luo ACJ, Liu C (2020) Analytical periodic motions in a discontinuous system with a switching hyperbola. Int J Dyn Control. https://doi.org/10.1007/s40435-020-00648-5

  4. Rafiq D, Bazaz MA (2020)A comprehensive scheme for reduction of nonlinear dynamical systems. Int J Dyn Control 8:361–369. https://doi.org/10.1007/s40435-019-00589-8

  5. Reddy RKK, Arunkumar MP, Bhagat V, Reddy MBSS (2020) Vibro-acoustic characteristics of viscoelastic sandwich panel: effect of inherent damping. Int J Dyn Control. https://doi.org/10.1007/s40435-020-00654-7

  6. Ruttanatri P, Cole MOT, Pongvuthithum R (2020) Structural vibration control using delayed state feedback via LMI approach: with application to chatter stability problems. Int J Dyn Control. doi: https://doi.org/10.1007/s40435-020-00645-8

  7. Shao K, Xu Z, Wang T (2020) Robust finite-time sliding mode synchronization of fractional-order hyper-chaotic systems based on adaptive neural network and disturbances observer. Int J Dyn Control. https://doi.org/10.1007/s40435-020-00657-4

  8. Wei C, Jing X (2020) A comprehensive review on vibration energy harvesting: modelling and realization. Renew Sustain Energy Rev 74:1–18. https://doi.org/10.1016/j.rser.2017.01.073

  9. Xie X, Wang Q (2015) A mathematical model for piezoelectric ring energy harvesting technology from vehicle tires. Int J Eng Sci 94:113–127. doi: https://doi.org/10.1016/j.ijengsci.2015.05.004

  10. Yuvapriya T, Lakshmi P (2020) Numerical analysis and performance enhancement of active suspension system using bat optimization. Int J Dyn Control. https://doi.org/10.1007/s40435-020-00664-5

  11. Zerimeche H, Houmor T, Berkane A : Combination synchronization of different dimensions fractional-order non-autonomous chaotic systems using scaling matrix. Int J Dyn Control. https://doi.org/10.1007/s40435-020-00660-9

  12. Badfar E, Ardestani MA (2020) Design of adaptive fuzzy gain scheduling fast terminal sliding mode to control the radius of bubble in the blood vessel with application in cardiology. Int J Dyn Control. https://doi.org/10.1007/s40435-020-00641-y

  13. Touairi S, Mabrouki M (2020) Mechatronic modeling and control of energy recovery in motorcycle tires. In: 2020 IEEE 6th international conference on optimization and applications (ICOA), pp 1–5

    Google Scholar 

  14. Gambhire SJ, Kishore DR, Londhe PS, Pawar SN (2020) Review of sliding mode based control techniques for control system applications. Int J Dyn Control. https://doi.org/10.1007/s40435-020-00638-7

  15. Ghelichi M, Goltabar AM, Tavakoli HR, Karamodin A (2020) The cost-effective and multi-objective optimal positioning of active actuators based on tug of war method in seismically excited benchmark highway bridge. Int J Dyn Control. doi: https://doi.org/10.1007/s40435-020-00655-6

  16. Gopala Rao LVV, Narayanan S (2020) Optimal response of half car vehicle model with sky-hook damper based on LQR control. Int J Dyn Control 8:488–496. https://doi.org/10.1007/s40435-019-00588-9

  17. Hasan S, Dhingra AK (2020) 8 Degrees of freedom human lower extremity kinematic and dynamic model development and control for exoskeleton robot based physical therapy. Int J Dyn Control 8:867–886. https://doi.org/10.1007/s40435-020-00620-3

  18. Iggidr A, Oumoun M (2020) Simultaneous stabilization of single-input nonlinear systems with bounded controls. Int J Dyn Control. https://doi.org/10.1007/s40435-020-00658-3

  19. Touairi S, Mabrouki M (2020) Optimization of Harvester System in embedded vehicle systems via Bond Graph modeling algorithm. In: 2020 IEEE 6th international conference on optimization and applications (ICOA). pp 1–6

    Google Scholar 

Download references

Author information

Authors and Affiliations

  1. Industrial Engineering Laboratory, Faculty of Sciences and Techniques, Sultan Moulay Slimane University, BP 523, 23000, Beni Mellal, Morocco

    Souad Touairi & Mustapha Mabrouki

Authors
  1. Souad Touairi
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Mustapha Mabrouki
    View author publications

    You can also search for this author in PubMed Google Scholar

Editor information

Editors and Affiliations

  1. ENSA, Sidi Mohamed Ben Abdellah University, Fez, Morocco

    Saad Motahhir

  2. Faculty of Sciences, Sidi Mohamed Ben Abdellah University, Fez, Morocco

    Badre Bossoufi

Rights and permissions

Reprints and permissions

Copyright information

© 2021 The Author(s), under exclusive license to Springer Nature Switzerland AG

About this paper

Check for updates. Verify currency and authenticity via CrossMark

Cite this paper

Touairi, S., Mabrouki, M. (2021). Improve the Energy Harvesting Alternatives Using the Bond Graph Approach for Powering Critical Autonomous Devices. In: Motahhir, S., Bossoufi, B. (eds) Digital Technologies and Applications. ICDTA 2021. Lecture Notes in Networks and Systems, vol 211. Springer, Cham. https://doi.org/10.1007/978-3-030-73882-2_143

Download citation

Publish with us

Policies and ethics

Search

Navigation