Abstract
The article reflects the results of the study of geometry, contact and bending strength, as well as failure probability associated with contact and bending endurance of progressive gears, i.e. cylindrical arc teeth gears, achieved within the framework of national scientific schools (USSR and Russia). These gears in the conditions of machine unbraced drive bodies can significantly increase the durability of both contact and bending strength and endurance. Modern lines of study of cylindrical arc gears are shown.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Airapetov, E.L., Gorodnichij, V.P., Erikhov, M.L., Syzrantsev, V.N.: Arc teeth cylindrical gear loading. J. Vestnik Mashinostroeniya 2, 20–22 (1986)
Airapetov, E.L., Gorodnichij, V.P., Erikhov, M.L., Syzrantsev, V.N.: Experimental study of arc teeth gears. J. Vestnik Mashinostroeniya 3, 20–21 (1986)
Anan’ev, V.N.: Manufacture of cylindrical semi-rolled circular teeth gear pairs. Ph.D. Thesis, Tula, TPI (1989)
Bobkov, M.N.: Processing technology of gear pump spindle circular teeth. Ph.D. Thesis, Tula, TPI (1988)
Bobkov, M.N.: Theoretical aspects of manufacturing technology for circular teeth cylindrical wheels. D.Sc. Thesis, Tula, TGTU (1998)
Bochkova, D.E.: Forming circular teeth of a cylindrical wheel pair with a localized contact area. Ph.D. Thesis, Tula, TGTU (2019)
Babichev, D.T., Lagutin, S.A., Barmina, N.A.: Russian school of the theory and geometry of gearing. Part 2. Development of the Classical Theory of Gearing and Establishment of the Theory of Real Gearing in 1976–2000. J. Mech. Mach. Sci. 81, 1–46 (2020)
Copyright certificate of the USSR SU No. 1939 A1. IPC B23F 9/08 Method of cutting spiral gears. Artem’ev, A.A. (1950) (in Russian)
Copyright certificate of the USSR SU No. 227066 A1. IPC B23F9/04 Method of cutting gears. Moshkovskij, G.I., Dogoda, M.I. (1968) (in Russian)
Copyright certificate of the USSR SU No. 252825 A1. IPC B23F 9/08 Method of continuous cutting of wheel arc teeth. Nalein, V.L. (1969) (in Russian)
Copyright certificate of the USSR SU No. 282897 A1. IPC B 23F 9/02, B23F 9/08 Method of processing circular teeth of cylindrical and screw gears. Erikhov, M.L. (1970) (in Russian)
Copyright certificate of the USSR SU No. 429909 A2. IPC B23F 9/02, B23F 9/08, B23F 9/10 Method of processing circular wheel teeth of cylindrical and screw gears. Drovovozov, G.P., Erikhov, M.L., Ratmanov, E.V. (1974) (in Russian)
Copyright certificate of the USSR SU No. 443732 A1. IPC B23F 9/10 Method of cutting circular symmetrical teeth. Malein V.L. (1974) (in Russian)
Copyright certificate of the USSR SU No. 521084 A1. IPC B23F 1/06, B23F 9/0 Method of cutting cylindrical wheel circular teeth. Korotkin, V.I., Zhuravlev, G.A. (1976) (in Russian)
Copyright certificate of the USSR SU No. 601093A1. IPC B23F9/04 Method of cutting gears. Dogoda, M.I., Gogolev, O.P., Terenik, V.D. (1978) (in Russian)
Copyright certificate of the USSR SU No. 785569 A1. IPC F16H 1/08 The cylindrical gear. Sidorenko, A.K. (1980) (in Russian)
Copyright certificate of the USSR SU No. 795773 A1. IPC B23F 9/10 Method of processing cylindrical wheel circular teeth. Sidorenko, A.K. (1981) (in Russian)
Copyright certificate of the USSR SU No. 1021530 A. IPC B23F 9/00 Method of manufacturing teeth wheels with a localized pressure spot. Koganov, I.A., Bobkov, M.N. (1981) (in Russian)
Copyright certificate of the USSR SU №1016095 A1. IPC B23F21/02 Method of grinding circular teeth wheels. Koganov, I.A., Bobkov, M.N., Anan’ev, V.N. (in Russian) (1983)
Copyright certificate of the USSR SU No. 1009660 A1. IPC B23F 21/04, B23F 21/22 The cutter head to cut circular teeth cylindrical wheels. Ionenko, I.D., Kolesnikov, V.N., Ratmanov, E.V., Syzrantsev, V.N. (1983) (in Russian)
Copyright certificate of the USSR SU No. 996117 A1. IPC B23F 21/22 The cutter head. Koganov, I.A., Bobkov, M.N., Anan’ev, V.N., Timofeev, B.S. (1983) (in Russian)
Copyright certificate of the USSR SU No. 1013148 A1. IPC B23F 9/10 Method of manufacturing the circular teeth rack. Sidorenko, A.K., Korgun, I.P. (1983) (in Russian)
Copyright certificate of the USSR SU No. 1052344 A1. IPC B23B 5/42 The relieved teeth lathe. Drovovozov, G.P., Ionenko, I.D., Ratmanov, E.V., Syzrantsev, V.N. (1983) (in Russian)
Copyright certificate of the USSR SU No. 1089391A1. IPC G01B 5/20 The device to measure the linear coordinate of the tooth longitudinal line. Gorodnichij, V.P., Ionenko, I.D., Ratmanov, E.V., Rozenberg, K.Yu., Syzrantsev, V.N. (1984) (in Russian)
Copyright certificate of the USSR SU No. 1151391 A2. IPC B 23 F 21/04 The cutter head to cut circular teeth cylindrical gear wheels. Erikhov, M.L., Ionenko, I.D., Ratmanov, E.V., Syzrantsev, V.N. (1985) (in Russian)
Copyright certificate of the USSR SU No. 1152731 A1. IPC B23F 21/04, B23F 21/2 The cutter head. Gel’man, A.A., Kolesnikov, V.N., Syzrantsev, V.N., Tropin, V.V. (1985) (in Russian)
Copyright certificate of the USSR SU No. 1158313 A1. IPC B23F 9/00 Method of cutting circular teeth cylindrical gear wheels. Koganov, I.A., Shejnin, G.M., Bobkov, M.N. (1985) (in Russian)
Copyright certificate of the USSR SU No. 1164011 A2. IPC B23F 21/04 The cutter head to cut circular teeth cylindrical gear wheels. Ionenko, I.D., Ratmanov, E.V., Syzrantsev, V.N. (1985) (in Russian)
Copyright certificate of the USSR SU No. 1166927 A1. IPC B23F 9/00 Method of manufacturing a mating couple of circular teeth gears. Sidorenko, A.K. (1985) (in Russian)
Copyright certificate of the USSR SU No. 1180191 A1. IPC B23F 9/04 Methgod of processing gears. Sidorenko, A.K., Tsivkovskij, A.G., Eskin, V.I. (1985) (in Russian)
Copyright certificate of the USSR SU No. 1195185 A1. IPC G01B 21/08 The gear-tooth micrometer. Drovovozov, G.P., Ionenko, I.D., Ratmanov, E.V., Syzrantsev, V.N. (1985) (in Russian)
Copyright certificate of the USSR SU No. 1266681 A1. IPC B23F 9/02 Method of processing the circular teeth cylindrical wheel. Koganov, I.A., Shejnin, G.M., Bobkov, M.N., Petrova, N.P. (1986) (in Russian)
Copyright certificate of the USSR SU No. 1268323 A1. IPC B23F 9/02 The cutter head to process circular teeth wheels. Gorodnichij, V.P., Ionenko, I.D., Milyutin, V.M., Ratmanov, E.V., Syzrantsev, V.N. (1986) (in Russian)
Copyright certificate of the USSR SU No. 1269928 A1. IPC B23F 9/00 Method of finishing cutting arc teeth gear wheels. Ratmanov, E.V., Syzrantsev, V.N. (1986) (in Russian)
Copyright certificate of the USSR SU No. 1265419 A1. IPC F16H 1/24 The screw-and-nut roller gear. Erikhov, M.L., Kostenko, S.G., Ol’shtynskij, P.V., Gorokhov, V.M. (1986) (in Russian)
Copyright certificate of the USSR SU No. 1261755 A1. IPC B23F 9/10 Method of processing circular teeth. Shejnin, G.M., Bobkov, M.N., Shejnin, B.G. (1986) (in Russian)
Copyright certificate of the USSR SU No. 1287998 A1. IPC B23F 21/00, B23F 21/22 Cutter head. Ratmanov, E.V., Rozenberg, K.Yu., Syzrantsev, V.N. (1987) (in Russian)
Copyright certificate of the USSR SU No. 1310609 A1. IPC G01B 5/14 The device to control discontinuous helical surfaces of objects. Ionenko, I.D., Ratmanov, E.V., Syzrantsev, V.N. (1987) (in Russian)
Copyright certificate of the USSR SU No. 1296327 A1. IPC B23F 9/02 Method of cutting gear wheel circular teeth in conditions of continuous generating. Sukhorukov, Yu.N., Belyanov, F.V., Shchekin, B.M., Matsej, R.A., Dobryninskij, A.G. (1987) (in Russian)
Copyright certificate of the USSR SU No. 1446390 A2. IPC F16H 1/24 The screw-and-nut roller gear. Erikhov, M.L., Kostenko, S.G., Ol’shtynskij, P.V., Gorokhov, V.M. (1988) (in Russian)
Copyright certificate of the USSR SU No. 1505694 A1. IPC B23 F21/00 The cutter head. Shejnin, G.M., Bobkov, M.N. (1989) (in Russian)
Copyright certificate of the USSR SU No. 1664479 A1. IPC B23F9/02 Method of finishing cutting involute profiles of cylindrical teeth gears. Belyaev, A.I., Mikhajlov, G.I., Sidorenko, A.K., Siritsyn, A.I. (1991) (in Russian)
Copyright certificate of the USSR SU No. 1753100 A1. IPC F16 H 1/28 The planetary gearboxes and method of its assembly. Erikhov, M.L., Kostenko, S.G., Fonotov, V.T. (1992) (in Russian)
Cai, X.W., Fang, Z.D., Su, J.Z.: Study on meshing characteristics of face gear drive with arcuate tooth based of manufacture on NC machine. J. Aerosp. Power 27(1), 198–203 (2012)
Chang, Q., Hou, L., Li, B., Jia, B.: Modal analysis of cylindrical gears with arcuate tooth trace. J. Periodica Polytechnica Mech. Eng. 59(1), 23–29 (2015)
Chang, Q.: Parallel translating mechanism process-oriented mathematical model and 3-D model for cylindrical gears with curvilinear shaped teeth. Jordan J. Mech. Indus. Eng. 10, 171–177 (2016)
Drovovozov, G.P.: Study of geometrical and kinematic patterns of gearing formed with the generating wheel. Ph.D. Thesis, Kurgan, KMI (1980)
Dai, Y., Yukinori, A., Jiang, D.: Hobbing mechanism of cylindrical gear with arcuate tooth traces and experimental investigation. J. China Mech. Eng. 17(7), 706–709 (2006)
Evstigneev, M.I.: Study of the cutting method of arc teeth cylindrical wheels. Ph.D. Thesis, Moscow (1948)
Erikhov, M.L.: Principles of systematics, methods of analysis and issues of synthesis of gearing patterns. D.Sc Thesis, Khabarovsk, KhPI (1972)
Erikhov, M.L., Sheveleva, G.I., Syzrantsev, V.N., Anosova, T.P.: Analysis of elastic interaction of gear tooth surfaces formed by spiral-disk tools. J. Izvestiya VUZov. Mashinostroenie 3, 45–50 (1984)
Fang, Z.D., Cao, X.M., Shen, Y.B.: Tooth surface design and manufacture for arcuate tooth trace face-gear. J. Aerosp. Power 25(1), 224–227 (2010)
Gubar SA: Study of contact geometry and development of methods for selecting parameters of arc teeth cylindrical gears. Ph.D. Thesis, Kurgan, KMI (1981)
Gorodnichij, V.P.: Study of loading and contact endurance of arc teeth cylindrical gears. Ph.D. Thesis, Kurgan, KMI (1983)
Golovachev M.I.: Calculation of arc teeth cylindrical gears strength. Ph.D. Thesis, Moscow, MVTU (1986)
Grunichev, A.V.: Technological aspects of designing circular teeth cylindrical gears and gear processing tools (on the example of gears of KAMAZ driving axles). Ph.D. Thesis, Tula, TGTU (1994)
Ionenko, I.D.: Development of a set of technological solutions for processing longitudinally modified cylindrical wheel teeth of with spiral disc cutters. Ph.D. Thesis, Kurgan, KMI (1988)
Jiang, Y.Q., Hou, L., Zhao, Y.: The equation of the contact line of the involute curvilinear-tooth cylindrical gear pump for the agricultural tractor. Open Mech. Eng. J. 8, 879–884 (2014)
Kravchuk, A.A.: Theoretical and experimental studies of the arc teeth cylindrical transmission. Ph.D. Thesis, Khabarovsk, KhPI (1976)
Kostenko, S.G.: Synthesis of patterns, geometric calculation of meshing and experimental evaluation of the durability of arc screw-and-nut roller cylindrical gears. Ph.D. Thesis, Kurgan, KMI (1989)
Litvin, F.L.: Theory of gear meshing. Nauka, Moscow (1968)
Lipatov, S.I.: Development of a zero profile multi-cutter generating tool for high-performance arc wheel gear cutting on CNC machines. Ph.D. Thesis, Moscow, MGOU (2013)
Makhalov, A.G.: Study of bending endurance of cylindrical arc gears. Ph.D. Thesis, Kurgan, KMI (1983)
Milyutin, V.M.: Determination of the area of rational use of cylindrical gears based on a comparison of their loading taking into account geometrical and kinematic features. Ph.D. Thesis, Kurgan, KMI (1986)
Ma, Z., Wang, X.: Research on a highly durable and heavy-duty gearing. J. Xi’an Jiaotong Univ. 36(3), 282–286 (2002)
Molikov, A.A.: Fundamentals of high-performance technology for manufacturing cylindrical gear wheels. D.Sc Thesis, Tula, TGTU (2009)
Patent US No. 5.647 United States of America. Rack and Pinion. Semple A.M. (1848)
Patent US No. 3915060 United States of America. Method for cutting paired gears having arcuate tooth traces. Tamotsu K. (1975)
Patent No. 2641745 Federal Republic of Germany, B 23 F 9/10. Verfahren zur Herotellung eines otirn zahnradpaares Verzahnungmaxhine zur Durchfüh-rung des Verfahrens stirn zahnradpaares hergestellt nach dem Verfahren. Kotthaus E. (1977)
Patent CN No. 201225383 (Y) China, F16H 1/08. Arc teeth cylindrical gear speed reducer. Song A. and others (2009)
Parshin, A.N.: Development of methods for meshing analysis and synthesis and manufacturing arc cylindrical gear wheels. Ph.D. Thesis, Moscow, MGOU (2008)
Polyakov, V.V.: Technology for processing circular teeth of the semi-rolled cylindrical gear. Ph.D. Thesis, Tula, TGTU (2013)
Radzevich, S.P.: Gear Cutting Tools: Science and Engineering. CRC Press, Florida (2017)
Radzevich, S.P.: Theory of Gearing: Kinematics, Geometry, and Synthesis. CRC Press, Florida (2018)
Ratmanov, E.V.: Analytical and experimental study of the meshing of cylindrical gears formed by spiral disk tools. Ph.D. Thesis, Kurgan, KMI (1977)
Reshetov, L.N., Dogoda, M.I., Klin, M.V.: Features of geometry and tooth cutting of cylindrical quasi-involute gears with a cycloidal line of contact. J. Izvestiya VUZov. Mashinostroenie 5, 48–52 (1980)
Reshetov, L.N., Dogoda, M.I., Klin, M.V.: Revisiting certain issues of the geometry of cylindrical arc gears with cycloidal line of contact. J. Izvestiya VUZov. Mashinostroenie 4, 49–53 (1980)
Russian Patent SU No. 1787077 A3, MКИ B23F9/00. Method of processing a pair of cylindrical arc gears. Voronin B.F. (1993) (in Russian)
Russian Patent RU No. 2005019 C1, IPC B23F21/22. Cutter head. Shirokikh, E.V., Siritsyn, A.I., Belyaev, A.I., Mikhajlov, G.I. (1993) (in Russian)
Russian Patent RU No. 2009798 C1, IPC B23F21/22. Cutter head. Shirokikh, E.V., Siritsyn, A.I., Mikhajlov, G.I., Grushichev, V.V., Lipatov, A.M. (1994) (in Russian)
Russian Patent RU No. 2049608 C1, IPC B23F9/02. Method of processing involute circular teeth of cylindrical wheels. Belyaev, A.I., Siritsyn, A.I., C Siritsyn, D.A., Lobanov, N.A. (1995) (in Russian)
Russian Patent SU No. 1831978 A3, IPC B23F9/02. Method of forming cylindrical gear arc teeth. Sidorenko, A.K., Lobanov, N.A., Korbakov, A.V., Kozlov, Y.A. (1995) (in Russian)
Russian Patent RU No. 2191302 C2. IPC F16H1/24. The screw-and-nut roller gear. Gear roller transmission. Tret’yakov, A.P., Votinov, V.A., Kostenko, S.G., Gerasimov, V.Y. (2002) (in Russian)
Russian Patent RU No. 2322329 C1. IPC B23F 9/08 Method of manufacturing cylindrical arc gears. Plakhtin, V.D., Davydov, A.P., Parshin, A.N. (2008) (in Russian)
Russian Patent RU No. 2322329 C1. IPC B23F 9/08 Method of processing cylindrical arc gears. Bobkov, M.N., Shejnin, G.M., Polyakov, V.V. (2009) (in Russian)
Russian Patent RU No. 2404030 C1. IPC B23F 9/00 Method of manufacturing cylindrical arc gears. Plakhtin, V.D., Pankov, I.G., Davydov, A.P., Margolit, R.B., Parshin, A.N., Lipatov, S.I. (2010) (in Russian)
Russian Patent RU No. 2430813 C2. IPC B23F 21/22 The cutter head to cut arc teeth of cylindrical gears. Margolit, R.B., Lipatov, S.I., Parshin, A.N., Davydov, A.P., Plakhtin, V.D., Pankov, I.G. (2011) (in Russian)
Russian Patent RU No. 2447975 C1. IPC B23F 9/08 Method of manufacturing cylindrical arc gears. Vinogradov, A.N., Davydov, A.P., Lipatov, S.I., Margolit, R.B., Pankov, I.G., Parshin, A.N., Khar’kov, M.A. (2012) (in Russian)
Russian Patent RU No. 2467838 C2. IPC B23F 9/08 Method of manufacturing cylindrical arc gears. Davydov, A.P., Lipatov, S.I., Margolit, R.B., Pankov, I.G., Parshin, A.N. (2012) (in Russian)
Russian Patent RU No. 2469230 C1. IPC F16H 55/08 F16H 1/08 The cylindrical arc gear. Davydov, A.P., Lipatov, S.I., Margolit, R.B., Pankov, I.G., Parshin, A.N. (2012) (in Russian)
Russian Patent RU No. 2510789 C2. IPC B23F 9/02 B23F 9/08 Method of processing a pair of cylindrical gears. Bochkova, D.E., Bobkov, M.N., Shejnin, G.M., Malikov, A.A. (2014) (in Russian)
Russian Patent RU No. 2551250 C1. IPC F16H 1/08 The cylindrical arc gear. Vinogradov, A.N., Davydov, A.P., Lipatov, S.I., Margolit, R.B., Pankov, I.G. (2015) (in Russian)
Russian Patent RU No. 2564791 C1. IPC F16H 1/06 F16H 1/20 Cylindrical arc gear reduction unit. (options). Vinogradov, A.N., Davydov, A.P., Lipatov, S.I., Margolit, R.B., Pankov, I.G. (2015) (in Russian)
Russian Patent RU No. 178007 U1 IPC F16H 1/24 The screw-and-nut roller gear. Kostenko, S.G. (2018) (in Russian)
Russian Patent RU No. 194541 U1. IPC F16H 1/24 The screw-and-nut roller gear. Kostenko, S.G., Piven’, V.V. (2019) (in Russian)
Russian Patent RU No. 2721579 C1. IPC F16H 1/06 The adaptive cylindrical arc gear. Syzrantsev, V.N., Syzrantseva, K.V., Vibe, V.P., Denisov, Y.G. (2020) (in Russian)
Rozenberg, K.YU.: Development of procedure for strength calculation of cylindrical gears with arc teeth. Ph.D. Thesis, Kurgan, KMI (1984)
Sevryuk V.N.: The circular surface generalized analytical theory and its application to gear design. D.Sc Thesis, Voroshilovgrad (1972)
Shakhbazov, N.A.: Study of the geometry and formation of cylindrical wheel circular teeth. Ph.D. Thesis, Tbilisi (1974)
Sidorenko, A.K.: Gear «70-NKMZ». Mashinostroenie, Moscow (1984)
Sidorenko, A.K.: «90-VNIITI» tooth depth arc gear. Kolomna (1998)
Sidorkin, A.V.: Shaving and rolling circular teeth cylindrical gear wheels. Ph.D. Thesis, Tula, TGTU (2010)
Sheveleva, G.I.: Theory of generation and contact of moving bodies. Mosstankin, Moscow (1999)
Shtin, O.A. Evaluation of the performance of two-point contact cylindrical arc gears. Ph.D. Thesis, Kurgan, KMI (1993)
Su, J.Z., Fang, Z.D., Cao, X.M.: Tooth contact analysis of face gear drive with curvilinear shaped tooth by format cutting. J. Aerosp. Power 25(6), 1427–1431 (2010)
Syzrantsev, V.N.: Theoretical basis for profiling spiral generating surface tools and study of the processing method of bevel wheel circular teeth. Ph.D. Thesis, Kurgan, KMI (1977)
Syzrantsev, V.N.: Synthesis of meshing cylindrical gears with a localized contact. D.Sc Thesis, Kurgan, KMI (1989)
Syzrantsev, V.N.: Study of the processing method for hardened cylindrical wheel arc teeth. J. Izvestiya VUZov. Oil and Gas 4, 99–102 (2012)
Syzrantsev, V.N., Golofast, S.L.: Cyclic strains measurement and machine parts longevity forecasting according to integral strain gauges indications. Nauka, Novosibirsk (2004)
Syzrantsev, V.N., Golofast, S.L., Syzrantseva, K.V.: Diagnostics of Loading and Resource of Parts of Machines Transmissions and Carrying Systems According to Integral Strain Gauges Indicatioms. Nauka, Novosibirsk (2004)
Syzrantsev, V.N., Gorodnichij, V.P.: Methods of synthesis of geometric parameters of localized contact cylindrical gears. J. Vestnik Mashinostroeniya 9, 35–37 (1990)
Syzrantsev, V.N., Mockvina, EYu., Chernaya, L.A.: Method of profile modification of the tooth flank of the semi-rolled bevel gear. J. Izvestiya VUZov. Mashinostroenie 5(722), 33–40 (2020)
Syzrantsev, V.N., Nevelev, Y.P., Golofast, S.L.: Calculation of Equipment Durability Based on the Methods of the Distribution-Free Statistics. Nauka, Novosibirsk (2008)
Syzrantsev, V.N., Novoselov, V.V., Sozonov, P.M., Golofast, S.L.: Evaluation of Safety and Strength Reliability of Main Pipelines Using Nonparametric Statistics. Nauka, Novosibirsk (2013)
Syzrantsev, V., Syzrantseva, K.: Determination of stresses in tooth roots of gears by Integral Strain Gauges. J. Adv. Eng. Res. 133, 841–846 (2017)
Syzrantsev, V., Syzrantseva, K.: Processing of experimental data by means of nonparametric statistics. IOP Conf. Ser.: J. Phys.: Conf. Ser. 1059, Art. No. 012019 (2018)
Syzrantsev, V., Syzrantseva, K.: Verification of recovery of distribution density function of the random variable by methods of nonparametric statistics. IOP Conf. Ser.: Mater. Sci. Eng. 481(1), Art. No. 012004 (2019)
Syzrantsev, V.N., Syzrantseva, K.V.: Arc Cylindrical Gears: Geometry, Strength, Reliability. TIU, Tyumen (2020)
Syzrantsev, V., Syzrantseva, K., Kolbasin D.: Forming Surfaces of Semi-rolled Cylindrical Gearing Wheel and Gear Arc Teeth. Lecture Notes in Mechanical Engineering (2021)
Syzrantseva, K.V.: Prediction of gear failures using nonparametric statistics. J. Vestnik Mashinostroeniya 12, 10–13 (2009)
Syzrantseva, K.V.: Improvement of the methodology to estimate loading and reliability of machine parts based on the features of their operational strain. D.Sc Thesis, Tyumen, TIU (2018)
Syzrantseva, K., Syzrantsev, V.: Reliability estimation of machine parts with complicated geometry on a base of methods of nonparametric statistics. J. J. Eng. Appl. Sci. 11(2), 204–209 (2016)
Syzrantseva, K., Syzrantsev, V., Babichev, D.: Comparative analysis of stress–strain condition of cylindrical gears arc teeth and spurs. Lect. Notes Mech. Eng. ICIE 2019, 101–108 (2020)
Syzrantseva, K.V., Syzrantsev, V.N., Kolbasin, D.S.: Comparative estimation of the failure probability of cylindrical arc and helical gears by tooth bending endurance. AIP Conf. Proc. 2176(1), Art. No. 020010 (2019)
Tseng, R.T., Tsay, C.B.: Contact characteristics of cylindrical gears with curvilinear shaped teeth. J. Mechan. Mach. Theory 39(9), 905–919 (2004)
Tseng, R.T., Tsay, C.B.: Mathematical model and surface deviation of cylindrical gears with curvilinear shaped teeth cut by hob cutter. J. Mech. Des. Trans. ASME 127(5), 982–987 (2005)
Varshavskij, M.R.: Development of methods to estimate loading and durability of arc gears with a new geometry. Ph.D. Thesis, Kurgan, KMI (2002)
Vasin, V.A.: Design and technological support of the process of forming circular teeth of cylindrical wheels. Ph.D. Thesis, Tula, TGTU (2005)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2021 The Author(s), under exclusive license to Springer Nature Switzerland AG
About this chapter
Cite this chapter
Syzrantsev, V.N. (2021). Cylindrical Arc Gears: History, Achievements, and Problems. In: Barmina, N., Trubachev, E. (eds) Gears in Design, Production and Education. Mechanisms and Machine Science, vol 101. Springer, Cham. https://doi.org/10.1007/978-3-030-73022-2_6
Download citation
DOI: https://doi.org/10.1007/978-3-030-73022-2_6
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-73021-5
Online ISBN: 978-3-030-73022-2
eBook Packages: EngineeringEngineering (R0)