Abstract
In Chap. 4, the way to model the different consumers and the calculation of their consumptions were described. In Chap. 5, the results of these calculations were analyzed. From the available derived data set, it can be configured the energy-saving strategy by analyzing every consumption and the possibilities to cut it down.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Boharb A et al (2016) Auditing and analysis of energy consumption of an industrial site in Morocco. Energy 101:332–342. https://doi.org/10.1016/j.energy.2016.02.035
Uhlmann E, Reinkober S, Hollerbach T (2016) Energy efficient usage of industrial robots for machining processes. Proc CIRP 48:206–211. https://doi.org/10.1016/j.procir.2016.03.241
Vittorini D, Cipollone R (2016) Energy saving potential in existing industrial compressors. Energy 102:502–515. https://doi.org/10.1016/j.energy.2016.02.115
Yin Q, Du W-J, Ji X-L, Cheng L (2016) Optimization design and economic analyses of heat recovery exchangers on rotary kilns. Appl Energy 180:743–756. https://doi.org/10.1016/j.apenergy.2016.07.042
Utlu Z, Hepbaşlı A (2014) Exergoeconomic analysis of energy utilization of drying process in a ceramic production. Appl Therm Eng 70(1):748–762. https://doi.org/10.1016/j.applthermaleng.2014.05.070
Merlin K, Soto J, Delaunay D, Traonvouez L (2016) Industrial waste heat recovery using an enhanced conductivity latent heat thermal energy storage. Appl Energy 183:491–503. https://doi.org/10.1016/j.apenergy.2016.09.007
Hasan M, Zhang M, Wu W, Langrish TAG (2016) Discounted cash flow analysis of greenhouse-type solar kilns. Renew Energy 95:404–412. https://doi.org/10.1016/j.renene.2016.04.050
Chiaroni D, Chiesa M, Chiesa V, Franzò S, Frattini F, Toletti G (2016) Introducing a new perspective for the economic evaluation of industrial energy efficiency technologies: An empirical analysis in Italy. Sustain Energy Technol Assess 15:1–10. https://doi.org/10.1016/j.seta.2016.02.004
Li C, Goswami DY, Shapiro A, Stefanakos EK, Demirkaya G (2012) A new combined power and desalination system driven by low grade heat for concentrated brine. Energy 46(1):582–595. https://doi.org/10.1016/j.energy.2012.07.050
Colmenar-Santos A, Campíñez-Romero S, Pérez-Molina C, Mur-Pérez F (2016) An assessment of photovoltaic potential in shopping centres. Sol Energy 135:662–673. https://doi.org/10.1016/j.solener.2016.06.049
Borge-Diez D, Colmenar-Santos A, Pérez-Molina C, Castro-Gil M (2012) Experimental validation of a fully solar-driven triple-state absorption system in small residential buildings. Energy Build 55:227–237. https://doi.org/10.1016/j.enbuild.2012.09.040
Schreiber H, Graf S, Lanzerath F, Bardow A (2015) Adsorption thermal energy storage for cogeneration in industrial batch processes: experiment, dynamic modeling and system analysis. Appl Therm Eng 89:485–493. https://doi.org/10.1016/j.applthermaleng.2015.06.016
Wang X, El-Farra NH, Palazoglu A (2017) Optimal scheduling of demand responsive industrial production with hybrid renewable energy systems. Renew Energy 100:53–64. https://doi.org/10.1016/j.renene.2016.05.051
Colmenar-Santos A, Rosales-Asensio E, Borge-Diez D, Blanes-Peiró J-J (2016) District heating and cogeneration in the EU-28: current situation, potential and proposed energy strategy for its generalisation. Renew Sustain Energy Rev 62:621–639. https://doi.org/10.1016/j.rser.2016.05.004
Sipilä K (2016) 3 - cogeneration, biomass, waste to energy and industrial waste heat for district heating A2 - Wiltshire, Robin. Advanced District Heating and Cooling (DHC) systems. Woodhead Publishing, Oxford, pp 45–73
Ustaoglu A, Alptekin M, Akay ME (2017) Thermal and exergetic approach to wet type rotary kiln process and evaluation of waste heat powered ORC (Organic Rankine Cycle). Appl Therm Eng 112:281–295. https://doi.org/10.1016/j.applthermaleng.2016.10.053
Organic Rankine Cycle - an overview|ScienceDirect Topics (2020). https://www.sciencedirect.com/topics/engineering/organic-rankine-cycle. Accessed 27 Oct 2020
Youssef PG, AL-Dadah RK, Mahmoud SM (2014) Comparative analysis of desalination technologies. Energy Proc 61:2604–2607. https://doi.org/10.1016/j.egypro.2014.12.258
Ge Z, Yang C, Liu Y, Du X, Yang L, Yang Y (2014) Analysis of plate multi-effect distillation system coupled with thermal power generating unit. Appl Therm Eng 67(1):35–42. https://doi.org/10.1016/j.applthermaleng.2014.02.072
Berg SV (2015) Energy efficiency in developing countries: Roles for sector regulators. Energy Sustain Dev 29:72–79. https://doi.org/10.1016/j.esd.2015.10.002
WHO Sanitation WHO news-room fact sheets, June 19. https://www.who.int/news-room/fact-sheets/detail/sanitation
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Copyright information
© 2021 Springer Nature Switzerland AG
About this chapter
Cite this chapter
Cuviella-Suárez, C., Borge-Diez, D., Colmenar-Santos, A. (2021). Improvement Proposals. In: Water and Energy Use in Sanitary-ware Manufacturing. Green Energy and Technology. Springer, Cham. https://doi.org/10.1007/978-3-030-72491-7_6
Download citation
DOI: https://doi.org/10.1007/978-3-030-72491-7_6
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-72490-0
Online ISBN: 978-3-030-72491-7
eBook Packages: EnergyEnergy (R0)