Abstract
The cost of thermal energy represents one of the largest items of production cost of ceramic manufacturing and the CO2 emissions resulting from this industrial activity are very significant.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Cuviella- Suárez C, Peiró JJB, Borge-Diez D, Colmenar-Santos A (2019) Exergoeconomics in the sanitary-ware industry to reduce energy and water consumptions. AIP Conf Proc 2190(1):020061. https://doi.org/10.1063/1.5138547
Ciacco EFS, Rocha JR, Coutinho AR (2017) The energy consumption in the ceramic tile industry in Brazil. Appl Therm Eng 113:1283–1289. https://doi.org/10.1016/j.applthermaleng.2016.11.068
Scott CA, Sugg ZP (2015) Global energy development and climate-induced water scarcity—physical limits, sectoral constraints, and policy imperatives. Energies 8(8):8211–8225. https://doi.org/10.3390/en8088211
Monfort E, Mezquita A, Vaquer E, Celades I, Sanfelix V, Escrig A (2014) 8.05 - ceramic manufacturing processes: energy, environmental, and occupational health issues. In: Hashmi S, Batalha GF, Van Tyne CJ, Yilbas B (eds) Comprehensive materials processing. Elsevier, Oxford, pp 71–102
Vuckovic G, Vukic M, Stojilkovic M (2012) Avoidable and unavoidable exergy destruction and exergoeconomic evaluation of the thermal processes in a real industrial plant. Therm Sci 16(Suppl. 2):S433–S446. https://doi.org/10.2298/TSCI120503181V
Dincer I, Rosen MA, Al-Zareer M (2018) 5.5 exergy management. In: Dincer I (ed) Comprehensive energy systems. Elsevier, Oxford, pp 166–201
Kita H, Himoto I, Yamashita S (2016) Exergetic aspects of green ceramic processing. In: Singh M, Ohji T, Asthana R (eds) Green and sustainable manufacturing of advanced material. Elsevier, Oxford, pp 77–98
Ferrer S, Mezquita A, Aguilella VM, Monfort E (2019) Beyond the energy balance: exergy analysis of an industrial roller kiln firing porcelain tiles. Appl Therm Eng 150:1002–1015. https://doi.org/10.1016/j.applthermaleng.2019.01.052
Caglayan H, Caliskan H (2018) Investigation of the energy recovery in the burners of the ceramic factory kiln. Energy Proc 144:118–124. https://doi.org/10.1016/j.egypro.2018.06.016
Gomez RS et al (2019) Natural gas intermittent kiln for the ceramic industry: a transient thermal analysis. Energies 12(8):1568. https://doi.org/10.3390/en12081568
Ros-Dosdá T, Fullana-i-Palmer P, Mezquita A, Masoni P, Monfort E (2018) How can the European ceramic tile industry meet the EU’s low-carbon targets? A life cycle perspective. J Clean Prod 199:554–564. https://doi.org/10.1016/j.jclepro.2018.07.176
Mezquita A, Monfort E, Ferrer S, Gabaldón-Estevan D (2017) How to reduce energy and water consumption in the preparation of raw materials for ceramic tile manufacturing: dry versus wet route. J Clean Prod. https://doi.org/10.1016/j.jclepro.2017.04.082
LIFE_ENVIP.pdf (2012). http://ec.europa.eu/environment/life/project/Projects/index.cfm?fuseaction=search.dspPage&n_proj_id=4630&docType=pdf. Accessed 02 Dec 2016
Caglayan H, Şöhret Y, Caliskan H (2018) Thermo-ecologic evaluation of a spray dryer for ceramic industry. Energy Proc 144:164–169. https://doi.org/10.1016/j.egypro.2018.06.022
Reference Document on Best Available Techniques in the Ceramic Manufacturing Industry. European Commission, August 2007 (2007). http://eippcb.jrc.ec.europa.eu/reference/BREF/cer_bref_0807.pdf. Accessed 02 Dec 2016
Cuviella-Suárez C, Colmenar-Santos A, Borge-Diez D, López-Rey Á (2018) Management tool to optimize energy and water consumption in the sanitary-ware industry. J Clean Prod 197, Part 1:280–296. https://doi.org/10.1016/j.jclepro.2018.06.195
Bi R, Chen C, Tang J, Jia X, Xiang S (2019) Two-level optimization model for water consumption based on water prices in eco-industrial parks. Resour Conserv Recycl 146:308–315. https://doi.org/10.1016/j.resconrec.2019.04.004
Cuviella-Suárez C, Colmenar-Santos A, Borge-Diez D, López-Rey Á (2019) Heat recovery in sanitary-ware industry applied to water and energy saving by multi-effect distillation. J Clean Prod 213:1322–1336. https://doi.org/10.1016/j.jclepro.2018.12.269
Tonn B, Frymier PD, Stiefel D, Skinner LS, Suraweera N, Tuck R (2014) Toward an infinitely reusable, recyclable, and renewable industrial ecosystem. J Clean Prod 66:392–406. https://doi.org/10.1016/j.jclepro.2013.11.008
da Silva AC, Méxas MP, Quelhas OLG (2017) Restrictive factors in implementation of clean technologies in red ceramic industries. J Clean Prod 168:441–451. https://doi.org/10.1016/j.jclepro.2017.09.086
van Vugt M, Moye A, Sivakumar S (2019) Computational modelling approaches to meditation research: why should we care? Curr Opin Psychol 28:49–53. https://doi.org/10.1016/j.copsyc.2018.10.011
Brailsford SC, Eldabi T, Kunc M, Mustafee N, Osorio AF (2019) Hybrid simulation modelling in operational research: a state-of-the-art review. Eur J Oper Res 278(3):721–737. https://doi.org/10.1016/j.ejor.2018.10.025
Amini SH, Remmerswaal JAM, Castro MB, Reuter MA (2007) Quantifying the quality loss and resource efficiency of recycling by means of exergy analysis. J Clean Prod 15(10):907–913. https://doi.org/10.1016/j.jclepro.2006.01.010
Rosen MA (2002) Clarifying thermodynamic efficiencies and losses via exergy. Exergy Int J 2(1):3–5. https://doi.org/10.1016/S1164-0235(01)00054-1
Caglayan H, Caliskan H (2018) Energy, exergy and sustainability assessments of a cogeneration system for ceramic industry. Appl Therm Eng 136:504–515. https://doi.org/10.1016/j.applthermaleng.2018.02.064
Ceramic Technology Sanitary-ware, 2010th edn. SACMI IMOLA S.C. (2010)
Tsatsaronis G, Cziesla F, Gao Z (2003) Avoidable thermodynamic inefficiencies and costs in energy conversion systems. Part 1: methodology. In: Proceedings of ECOS 2003, January 2003, vol 2, pp 809–814
Ahmadi M, Baniasadi E, Ahmadikia H (2017) Process modeling and performance analysis of a productive water recovery system. Appl Therm Eng 112:100–110. https://doi.org/10.1016/j.applthermaleng.2016.10.067
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Copyright information
© 2021 Springer Nature Switzerland AG
About this chapter
Cite this chapter
Cuviella-Suárez, C., Borge-Diez, D., Colmenar-Santos, A. (2021). Exergoeconomic Analysis. In: Water and Energy Use in Sanitary-ware Manufacturing. Green Energy and Technology. Springer, Cham. https://doi.org/10.1007/978-3-030-72491-7_10
Download citation
DOI: https://doi.org/10.1007/978-3-030-72491-7_10
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-72490-0
Online ISBN: 978-3-030-72491-7
eBook Packages: EnergyEnergy (R0)