Skip to main content
SpringerLink
Log in

Modeling of Product Heating at the Stage of Beam Input in the Process of Electron Beam Welding Using the COMSOL Multiphysics System

  • Conference paper
  • First Online:
Software Engineering Perspectives in Intelligent Systems (CoMeSySo 2020)

Part of the book series: Advances in Intelligent Systems and Computing ((AISC,volume 1294))

Included in the following conference series:

Abstract

The actual task is to create simulation models designed to evaluate welded joints at electron-beam welding of thin-walled structures. Within the framework of this research mathematical models of electron beam input for AMG-6 and VT-14 alloys are considered. The article presents the developed simulation models of temperature distribution at different modes of electron beam input in the process of electron-beam welding. The models are constructed using special software COMSOL Multiphysics. The developed model of optimization of the electron beam input mode at the joint takes into account the nature of heat distribution in the melting zone, the set technological parameters of the electron-beam welding process, as well as the required parameters of the thin-walled constructions welded connection. Graphs of temperature distribution obtained at given process parameters, such as stabilization temperature, welding current, welding time, beam diameter, by which it is possible to estimate quality and applicability of proposed mathematical models, are given. A comparison of simulation modeling results with the results obtained in earlier studies allows us to conclude about the applicability of the proposed method in further studies. In particular, the proposed approach will be used in the development of models to output the electron beam. #COMESYSO1120.

This is a preview of subscription content, log in via an institution to check access.

Access this chapter

Log in via an institution
Chapter
USD 29.95
Price excludes VAT (USA)
  • Available as PDF
  • Read on any device
  • Instant download
  • Own it forever
eBook
USD 129.00
Price excludes VAT (USA)
  • Available as EPUB and PDF
  • Read on any device
  • Instant download
  • Own it forever
Softcover Book
USD 169.99
Price excludes VAT (USA)
  • Compact, lightweight edition
  • Dispatched in 3 to 5 business days
  • Free shipping worldwide - see info

Tax calculation will be finalised at checkout

Purchases are for personal use only

Institutional subscriptions

References

  1. Mastanaiah, P., Sharma, A., Reddy, G.M.: Process parameters-weld bead geometry interactions and their influence on mechanical properties: a case of dissimilar aluminium alloy electron beam welds. Defence Technol. 14, 137–150 (2018)

    Google Scholar 

  2. He, W., Dong, Y., Zhu, L., Dong, M.: Angular sensing system based on Y-type twin-core fiber and reflective variedline spacing grating fabricated by electron beam lithography. Results Phys. 18, 103193 (2020)

    Google Scholar 

  3. Kanigalpula, P.K.C., Pratihar1, D.K., Jha, M.N., Derose, J., Bapat, A.V., Rudra, P.A.: Experimental investigations, input-output modeling and optimization for electron beam welding of Cu-Cr-Zr alloy plates. Int. J. Adv. Manuf. Technol. 85, 711–726 (2016). Springer-Verlag, London (2015)

    Google Scholar 

  4. Salomatova, E.S., Trushnikov, D.N., Tsaplin, A.I., Belenkiy, V.Y.: The high performance computing for research of evaporation during electron beam welding. Bull. PNIPU Aerosp. Eng. 39, 96–108 (2014)

    Google Scholar 

  5. Reich, M., Bilato, R., Mszanowski, U., Poli, E., Rapson, C., Stober, J., Volpe, F., Zille, R.: Real-time beam tracing for control of the deposition location of electron cyclotron wave. Fusion Eng. Des. 100, 73–80 (2015)

    Article  Google Scholar 

  6. Permyakov, G.L., Trushnikov, D.N., Belenky, V.Ya., Olshanskaya, T.V.: Numerical modeling of the electron beam welding process with longitudinal beam oscillation. Bull. PNIPU Aerosp. Eng. 39, 139–145 (2015)

    Google Scholar 

  7. Rai, R., Palmer, T.A., Elmer, J.W., Debroy, T.: Heat transfer and fluid flow during electron beam welding of 304L stainless steel alloy. Weld. J. 88(3), 54–61 (2009)

    Google Scholar 

  8. Sudniky, W., Radajz, D., Erofeew, W.: Computerized simulation of laser beam welding, modelling and verification. J. Phys. D Appl. Phys. 29(11), 013 (1996)

    Google Scholar 

  9. Cho, W.I., Na, S.J., Thomy, C., Vollertsen, F.: Numerical simulation of molten pool dynamics in high power disk laser welding. J. Mater. Process. Technol. 212(1), 262–275 (2012)

    Article  Google Scholar 

  10. Trushnikov, D., Belenkiy, V., Schavlev, V., Piskunov, A., Abdulin, A., Mladenov, G.: Plasma charge current for control and monitoring at electron beam welding with the beam oscillation. Sensors 12(12), 17433–17445 (2012)

    Article  Google Scholar 

  11. Sudnik, V.A., Erofeev, V.A., Richter, K.-H., Heins, K.-V.: Numerical modelling of the EBW process. In: Proceedings of International Conference Computer Technology in Welding and Manufacturing & Mathematical Modeling and Information Technologies in Welding and Related Processes, Kiev, pp. 295–300 (2000)

    Google Scholar 

  12. Trushnikov, D.N., Belen’kii, V.Y.: Investigation of the formation of the secondary current signal in plasma in electron beam welding with oscillations of the electron beam. Weld. Int. 27(11), 877–880 (2013)

    Google Scholar 

  13. Poli, E., Peeters, A.G., Pereverzev, G.V.: TORBEAM, a beam tracing code for electron-cyclotron waves in tokamak plasmas. Comput. Phys. Commun. 136(1–2), 90–104 (2001)

    Article  Google Scholar 

  14. Felici, F., Sauter, O., Coda, S., Duval, B.P., Goodman, T.P., Moret, J.-M., Paley, J.I.: the TCV Team: Real-time physics-model-based simulation of the current density profile in tokamak plasmas. Nucl. Fusion 51(8), 083052 (2011)

    Article  Google Scholar 

  15. Erofeev, V.A., Logvinov, R.V., Nesterenkov, V.M.: Features of the use of the equivalent heat source, taking into account the strain and stress in the process of electron beam welding. Weld. Diagn. 4, 22–26 (2010)

    Google Scholar 

  16. Yazovskikh, V.M.: Model of deep penetration in electron beam welding. Weld. Eng. 20(8), 16–20 (2005)

    Google Scholar 

  17. Seregin, Y.N., Kurashkin, S.O.: Modeling of the EBW mode for predicting the parameters of the weld. In: MPEI: Collection of Materials of 2nd International Conference, Moscow, Russia, pp. 26–36 (2017)

    Google Scholar 

  18. Kurashkin, S.O., Laptenok, V.D., Murygin, A.V., Seregin, Y.N.: Analytical characteristics of the electron beam distribution density over the heated spot for optimizing the electron-beam welding process. IOP Conf. Ser. Mater. Sci. Eng. 681, 012021 (2019)

    Google Scholar 

  19. Seregin, Y.N., Kurashkin, S.O.: Modeling the thermal process using the temperature functional by electron beam welding. IOP Conf. Ser. Mater. Sci. Eng. 734, 012003 (2020)

    Google Scholar 

  20. Seregin, Y.N., Laptenok, V.D., Uspenskiy, N.V., Nikitin, V.P.: Experimental research on the optimization of the technology of electron-beam welding of aluminum alloys. In: Technologies and equipment of EBW-2011 Materials of the St. Petersburg International Scientific and Technical Conference, Russia, Saint Petersburg, pp. 71–80 (2011)

    Google Scholar 

  21. Rykalin, N.N., Zuev, I.V., Uglov, A.A.: Fundamentals of Electron Beam Processing of Materials. Mashinostroyeniye, Moscow (1978)

    Google Scholar 

  22. Laptenok, V.D., Murygin, A.V., Seregin, Y.N., Braverman, V.Y.: Electron beam welding control., Russia, Krasnoyarsk, CAA (2000)

    Google Scholar 

Download references

Acknowledgments

The reported study was funded by RFBR, Government of the Krasnoyarsk Territory and the Regional Science Foundation, project number 19-48-240007 “Mathematical and algorithmic support of the electron-beam welding of thin-walled aerospace structures”.

Author information

Authors and Affiliations

  1. Reshetnev Siberian State University of Science and Technology, Krasnoyarsk, Russia

    Sergei Kurashkin, Daria Rogova, Vadim Tynchenko, Vyacheslav Petrenko & Anton Milov

  2. Siberian Federal University, Krasnoyarsk, Russia

    Vadim Tynchenko & Vyacheslav Petrenko

Authors
  1. Sergei Kurashkin
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Daria Rogova
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Vadim Tynchenko
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Vyacheslav Petrenko
    View author publications

    You can also search for this author in PubMed Google Scholar

  5. Anton Milov
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Vadim Tynchenko .

Editor information

Editors and Affiliations

  1. Faculty of Applied Informatic, Tomas Bata University in Zlín, Zlín, Czech Republic

    Radek Silhavy

  2. Faculty of Applied Informatics, Tomas Bata University in Zlin, Zlín, Czech Republic

    Petr Silhavy

  3. Faculty of Applied Informatics, Tomas Bata University in Zlin, Zlín, Czech Republic

    Zdenka Prokopova

Rights and permissions

Reprints and permissions

Copyright information

© 2020 The Editor(s) (if applicable) and The Author(s), under exclusive license to Springer Nature Switzerland AG

About this paper

Check for updates. Verify currency and authenticity via CrossMark

Cite this paper

Kurashkin, S., Rogova, D., Tynchenko, V., Petrenko, V., Milov, A. (2020). Modeling of Product Heating at the Stage of Beam Input in the Process of Electron Beam Welding Using the COMSOL Multiphysics System. In: Silhavy, R., Silhavy, P., Prokopova, Z. (eds) Software Engineering Perspectives in Intelligent Systems. CoMeSySo 2020. Advances in Intelligent Systems and Computing, vol 1294. Springer, Cham. https://doi.org/10.1007/978-3-030-63322-6_77

Download citation

Publish with us

Policies and ethics

Search

Navigation