Abstract
This paper presents a critical review of the state-of-the-art on the context of sustainable renovation of buildings and infrastructures. After a short presentation of the method and the context of the study a chronological description is used to evocate the principal fields of research and engineering practices for design of sustainable and durable materials and structures, and for evaluation of the damage state materials and structures. The new trends on the durability of materials and structures developed or reinforced in a context of increasing societal requirements in terms of sustainability are treated along with traditional mechanistic approaches such as mechanics of failure, mechanics of damage, fatigue, environmental impact on the durability including thermal, hydric and chemical interactions. In particular, some technics used for the diagnostic of historical stone buildings are cited as an example of research/engineering practice on the durability of structures and materials. The new trends on sustainable materials design and their industrial use, including the green materials, bio-resourced materials for construction and insulation of buildings, recycled materials from buildings and infrastructures are evocated in conclusion.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
SDKP: Sustainable Development Knowledge Platform (2019). https://sustainabledevelopment.un.org/. Accessed 01 Oct 2019
Pelenc, J., Deduerware, T.: Weak Sustainability versus Strong Sustainability (2015). https://doi.org/10.13140/rg.2.1.3265.2009
European Commission: Life cycle indicators for resources, products and waste. Report by the Joint Research Centre of the Europen Commission. Luxembourg: Publications Office of the European Union (2012)
Funtas, G., Polette, M., Rye, T., Tischer, V.: Environmental and economic assessment of traffic-related air pollution using aggregate spatial information: a case study of Balneário Camboriú, Brazil. J. Transp. Health 14, 100592 (2019)
Leonard, A., Limbourg, S., Merchan, A.L., Mostert, M.: Life cycle externalities versus external costs: the case of inland freight transport in Belgium. Transp. Res. Part D: Transp. Environ. 67, 576–595 (2019)
Daly, H.E.: Toward some operational principles of sustainable development. Ecol. Econ. 2(1), 1–6 (1990). https://doi.org/10.1016/0921-8009(90)90010-R
Belayachi, N., Boulnois, J., Hoxha, D.: Réhabilitation thermique d’une maison d’habitation en utilisant le biocomposite béton-paille. 35ème Rencontres Universitaires de Génie Civil, 22–24 Mai 2017, Nantes (2017)
Broard, Y., Belayachi, N., Hoxha, D., Ranganathan, N., Méo, N.: Mechanical and hygrothermal behaviour of clay-sunflower (Helianthus annuus) and rape straw (Brassica napus) plaster bio-composites for building insulation. Constr. Build. Mater. 161, 196–207 (2018)
Siegesmund, S., Snethlage, R. (eds.): Stone in Architecture, 4th edn. Springer, Heidelberg (2014). https://doi.org/10.1007/978-3-642-14475-2_1
Pacheco-Torgal, F., Lourenço, … P. Chindaprasir, Eco-efficient Masonry Bricks and Blocks, Design, Properties and Durability. Woodhead Publishing (2015). ISBN 978-1-78242-305-8, 548 p. https://doi.org/10.1016/C2014-0-02158-2
Belayachi, N., Hoxha, D., Slaimia, M.: Impact of accelerated climatic aging on the behaviour of gypsum plaster-straw material for building thermal insulation. Constr. Build. Mater. 125, 912–918 (2016)
Pacheco F., Jalali T. S. (2016) Ecoefficient construction and building materials. Spring Edition, ISBN 978-0-85729-892-8, https://doi.org/10.1007/978-0-85729-892-8
Joblot, L.: Contribution à la mise en œuvre du BIM en rénovation: proposition d’un Modèle de Maturité BIM spécifique, Ph.D. Ecole Nationale des Arts et Metiers ENSAM (2018). (in french)
Volk, R., Stengel, J., Schultmann, F.: Building Information Modeling (BIM) for existing buildings: literature review and future needs. Autom. Constr. 38, 109–127 (2014)
Pavanelli, D.D., Voulvoulis, N.: Habitat Equivalency Analysis, a framework for forensic cost evaluation of environmental damage. Ecosyst. Serv. 38, 100953 (2019). https://doi.org/10.1016/j.ecoser.2019.100953
He, G., Li, J., Tam, V.W.Y., Wang, G., Zuo, J.: Stakeholders’ willingness to pay for the new construction and demolition waste landfill charge scheme in Shenzhen: a contingent valuation approach. Sustain. Cities Soc. 52, 101663 (2019). https://doi.org/10.1016/j.scs.2019.101663
Bouasker, M., Belayachi, N., Hoxha, D., Al-Mukhtar, M.: Physical characterization of natural straw fibers as aggregates for construction materials applications. Materials 7(4), 3034–3048 (2014)
Belayachi, N., Bouasker, M., Hoxha, D., Al-Mukhtar, M.: Thermo-mechanical behaviour of an innovant straw lime composite for thermal insulation applications. Appl. Mech. Mater. 390, 542–546 (2013)
Ismail, B., Belayachi, N., Hoxha, D.: Optimisation de la performance thermique d’un bio-composite à base de fibres végétales: étude expérimentale et numérique. Conférence Internationale Francophone NoMaD 2018, Liège Université 7–8 Novembre 2018 (2018)
Amziane, S., Arnaud, L.: Les bétons de granulats d’origine végétale: application au béton de chanvre. Edition Lavoisier, Paris (2013). ISBN 978-2-7462-3809-1
https://www.vicat.fr/content/download/91008/838050/file/CP_BIOSYS.PDF
https://www.biofib.com/files/BIOFIB_TRIO-Avis_technique_CSTB_Murs.pdf
Lemaitre, J., Chaboche, J.L.: Mécanique des matériaux solides. Dunod (1996)
Grasberger, S., Meschke, G.: Thermo-hygro-mechanical degradation of concrete: From coupled 3D material modelling to durability oriented multifield structural analyses. Mater. Struct. Concrete Sci. Eng. 37, 244–256 (2004)
Zhao, C., Hobbs, B.E., Hornby, P., Ord, A., Peng, S., Liu, L.: Theoretical and numerical analyses of chemical-dissolution front instability in fluid-saturated porous rocks. Int. J. Numer. Anal. Meth. Geomech. 32, 1107–1130 (2008). https://doi.org/10.1002/nag.661
Eslami, J., Hoxha, D., Grgic, D.: Estimation of the damage of a porous limestone using continuous wave velocity measurements during uniaxial creep tests. Mech. Mater. 49, 51–65 (2012)
Michel, L., Do, D.P., Coignard, B., Hoxha, D.: On the numerical evaluation of historical stone sculpture artwork restoration. Eur. J. Environ. Civ. Eng. (2014). https://doi.org/10.1080/19648189.2014.891471
Bieniawski, Z.T.: Stability concept of brittle fracture propagation in rock. Eng. Geol. 2(3), 149–162 (1967). https://doi.org/10.1016/0013-7952(67)90014-2
Sun, C.T., Jin, Z.H.: Fracture Mechanics, Academic Press (2012). Elsevier, ISBN 978-0-12-385001-0, 336 pg. https://doi.org/10.1016/C2009-0-63512-1
Irwin, G.R.: Fracture Dynamics. Fracturing of Metals, American Society for Metals, Cleveland (1948)
Griffith, A.A.: Philosophical Transactions. Series A 221, 163–198 (1920)
Atkinson, B.: Subcritical crack growth in geological materials. J. Geophys. Res. 89(B6), 4077–4114 (1984)
Stavros, K.K. (ed.): Fracture and Failure of Natural Building Stones: Applications in the Restoration of Ancient Monuments, Springer Science & Business Media (2007), 592 pg
Paris, Paul, C., Erdogan, F.: A critical analysis of crack propagation laws. J. Basic Eng. Trans. Am. Soc. Mech. Eng. 528–534 (1963)
NF EN 1990 Eurocode– Basis of structural Design – Annex A1, for Buildings
Yao, Y., Wang, L,. Wittmann, F., De Belie, N., Schlangen, E., Gehlen, C., Wang, Z, Eguez, H., Cao, Y., Yunus, B., Li, J.: Recommendation of RILEM TC 246-TDC: test methods to determine durability of concrete under combined environmental actions and mechanical load. Mater. Struct. 50, 155 (2017). https://doi.org/10.1617/s11527-017-1000-3
RILEM Technical Committee: Recommendation of RILEM TC 212-ACD: acoustic emission and related NDE techniques for crack detection and damage evaluation in concrete. Mater. Struct. 43(9), 1187–1189 (2010). 10.1617/s11527-010-9640-6
RILEM TC 177-MDT: Test method recommendations of RILEM TC 177-MDT ‘Masonry durability and on-site testing’ -D.5: In-situ stress - strain behaviour tests based on the flat jack. Mater. Struct. 37(271), 497–501 (2004)
TC 129-MHT:Test methods for mechanical properties of concrete at high temperatures Recommendations: Part 7: Transient Creep for service and accident conditions. Mater. Struct. 31(209), 290–295 (1998)
EN 1991-2:2003 Eurocode 1: Actions on structures -Part 2: Traffic loads on bridges
Katpady, D.N., Hazehara, H., Soeda, M. et al.: Int. J. Concr. Struct. Mater. 12, 30 (2018). https://doi.org/10.1186/s40069-018-0260-9
Zaharieva, R., Buyle-Bodin, F., Skoczylas, F., Wirquin, E.: Assessment of the surface permeation properties of recycled aggregate concrete. Cement Concr. Compos. 25, 223–232 (2003)
Molina, E.G., Sebastián, E., Alonso, F.J.: Evaluation of stone durability using a combination of ultrasound, mechanical and accelerated aging tests. J. Geophys. Eng. 10, 035003 (2013). https://doi.org/10.1088/1742-2132/10/3/035003
Cheng, Y.C., Guo, H.B., Wang, X.Q., Jiao, Y.B.: Durability assessment of reinforced concrete bridge based on fuzzy neural networks. Adv. Mater. Res. 838–841, 1069–1072 (2014)
EL-Bashir, S., Althumairi, N., Alzayed, N.: Durability and mechanical performance of PMMA/Stone sludge nanocomposites for acrylic solid surface applications. Polymers (Basel), 9(11), 604 (2017). https://doi.org/10.3390/polym9110604
Purcell, C.E.: Deep Energy Renovation of Traditional Buildings: Addressing Knowledge Gaps and Skills Training in Ireland (2018). https://www.heritagecouncil.ie/
DIRECTIVE 2010/31/EU: European Council Directive of the European Parliament and of the Council on the Energy Performance of Buildings (Recast) PE-CONS 15/10, ENER 131 ENV 255, CODEC 382 (2010)
EN 16883:2017: Conservation of cultural heritage - Guidelines for improving the energy performance of historic buildings (2017)
EN 15026:2007: Hygrothermal Performance of Building Components and Building Elements -Assessment of Moisture Transfer by Numerical Assessment (2007)
EN 15978:2011: Sustainability of Construction Works -Assessment of Environmental Performance of Buildings -Calculation Method (2011)
Lee, J., Mahendra, S., Alvarez, P.J.: Nanomaterials in the construction industry: a review of their applications and environmental health and safety considerations. ACS Nano. 4(7), 3580–3590 (2011). https://doi.org/10.1021/nn100866w
Hincapiéa, I., Caballero-Guzmana, A., Hiltbrunnerb, D., Nowack, B.: Use of engineered nanomaterials in the construction industry with specific emphasis on paints and their flows in construction and demolition waste in Switzerland. Waste Manag 43, 398–406 (2015)
ICOMOS, International Council for Monuments and Sites https://www.icomos.org/en
SCI Steel Construction Institut https://www.steel-sci.com/
Janjua, S.Y., Sarker, P.K., Biswas, W.K.: A review of residential buildings’ sustainability performance using a life cycle assessment approach. J. Sustain. Res. 1, e190006 (2019). https://doi.org/10.20900/jsr20190006
Interaction Design Foundation: https://www.interaction-design.org/
Marjaba, G.E., Chidiac, S.E.: Sustainability and resiliency metrics for buildings—critical review. Build. Environ. 101, 116–125 (2016)
Coussy, O.: Poromechanics. Wiley (2004). ISBN 0-470-84920-7, 312 pp
Dormieux, L., Kondo, D., Ulm, F.: Microporomechanics. Wiley Blackwell (2006). ISBN 9780470031889, 344 pg
Hoxha, D., Homand, F., Auvray, C.: Deformation on natural gypsum rock: mechanisms and questions. Eng. Geol. 86(1), 1–17 (2006)
Hoxha, D., Homand, F., Giraud, A., Auvray, C.: Saturated and unsaturated behaviour modelling of Meuse-Haute/Marne argillite. Int. J. Plast 23, 733–766 (2007)
Auvray, C., Homand, F., Hoxha, D.: The influence of relative humidity on the rate of convergence in an underground gypsum mine, Int. J. Rock Mech. Min. Sci. 45(8), 1454–1468 (2008)
Belayachi, N., Do, D.P., Hoxha, D.: Thermo-hydro-mechanical behavior of a tuffeau stone masonry. Eur. J. Environ. Civ. Eng. 16(5), 557–570 (2012)
Hoxha, D., Belayachi, N., Do, D.P.: On Thermo-Hydro-Mechanical (THM) fatigue damage of historical stone buildings. Adv. Mater. Res. 891, 36–41 (2014)
Belayachi, N., Hoxha, D.: Damage of historical stone masonry buildings: combined effects of spatial variability of stone properties and environmental condition. J. Civ. Eng. Archit. 10, 743–754 (2016)
Janvier-Badosa, S., Beck, K., Brunetaud, X., Al-Mukhtar, M.: Historical study of chambord castle: basis for establishing the monument health record. Int. J. Archit. Heritage 7(3), 247–260 (2013). https://doi.org/10.1080/15583058.2011.634959
Al-Omari, A., Brunetaud, X., Beck, K., Al-Mukhtar, M., Street, M.: Hygrothermal stress and damage risk in the stones of the Castle of Chambord-France. Int. J. Civ. Struct. Eng. 4(3), 402–18 (2014)
Brunetaud, X., Luca, L.D., Janvier-Badosa, S., Beck, K., Al-Mukhtar, M.: Application of digital techniques in monument preservation. Eur. J. Environ. Civ. Eng. 16(5), 543–556 (2012)
Deacon, D.H.: The durability of steel structures in different environments. In: Durability of materials and structures in Buildings and Civil Engineering, Whittles Publishing (2006). ISBN 1-870325-58-3, 474 pp
Janvier-Badosa, S., Beck, K., Brunetaud, X., Al-Mukhtar, M.: The occurrence of gypsum in the scaling of stones at the Castle of Chambord (France). Environ. Earth Sci. 71(11), 4751–4759 (2014)
Delgado, J.M.P.Q. (ed.): New Approaches to Building Pathology and Durability, Building Pathology and Rehabilitation 6, https://doi.org/10.1007/978-981-10-0648-7_2
Siegesmund, S., Snethlage, R. (eds.): Stone in Architecture: Properties and Durability, vol. 227, 4th edn. Springer, Heidelberg (2011). https://doi.org/10.1007/978-3-642-14475-2_4
Robador, M.D., Arroyo, F., Perez-Rodriguez, J.L.: Study and restoration of the Seville City Hall façade. Constr. Build. Mater. 53, 370–380 (2014). https://doi.org/10.1016/j.conbuildmat.2013.11.088
Tortora, M., Sfarra, S., Chiarini, M., Daniele, V., Taglieri, G., Cerichelli, G.: Non-destructive and micro-invasive testing techniques for characterizing materials, structures and restoration problems in mural paintings. Appl. Surf. Sci. 387, 971–985 (2016). https://doi.org/10.1016/j.apsusc.2016.07.023
Kilic, G.: Using advanced NDT for historic buildings: towards an integrated multidisciplinary health assessment strategy. J. Cult. Heritage 16(4), 526–535 (2015). https://doi.org/10.1016/j.culher.2014.09.010
McCann, D.M., Forde, M.C.: Review of NDT methods in the assessment of concrete and masonry structures. NDT and E Int. 34(2), 71–84 (2001). https://doi.org/10.1016/S0963-8695(00)00032-3
Sýkora, M., Diamantidis, D., Holický, M., Marková, J., Rózsás, Á.: Assessment of compressive strength of historic masonry using non-destructive and destructive techniques. Constr. Build. Mater. 193, 196–210 (2018). https://doi.org/10.1016/j.conbuildmat.2018.10.180
Sena da Fonseca, B., Ferreira Pinto, A.P., Piçarra, S., Montemor, M.F.: Artificial aging route for assessing the potential efficacy of consolidation treatments applied to porous carbonate stones. Mater. Des. 120, 10–21 (2017). https://doi.org/10.1016/j.matdes.2017.02.001
Duarte, R., Flores-Colen, I., de Brito, J., Hawreen, A.: Variability of in-situ testing in wall coating systems - Karsten tube and moisture meter techniques. J. Build. Eng. 27 (2020). https://doi.org/10.1016/j.jobe.2019.100998
Manohar, S., Bala, K., Santhanam, M., Menon, A.: Characteristics and deterioration mechanisms in coral stones used in a historical monument in a saline environment. Constr. Build. Mater. 241 (2020). https://doi.org/10.1016/j.conbuildmat.2020.118102
Hassine, M.A., Beck, K., Brunetaud, X., Al-Mukhtar, M.: Use of electrical resistance measurement to assess the water saturation profile in porous limestones during capillary imbibition. Constr. Build. Mater. 165, 206–217 (2018). https://doi.org/10.1016/j.conbuildmat.2017.12.238
Alderete, N., Villagrán Zaccardi, Y., Snoeck, D., Van Belleghem, B., Van den Heede, P., Van Tittelboom, K., De Belie, N.: Capillary imbibition in mortars with natural pozzolan, limestone powder and slag evaluated through neutron radiography, electrical conductivity, and gravimetric analysis. Cement Concr. Res. 118, 57–68 (2019). https://doi.org/10.1016/j.cemconres.2019.02.011
Khodeir, L.M., Aly, D., Tarek, S.: Integrating HBIM (Heritage Building Information Modeling) Tools in the Application of Sustainable Retrofitting of Heritage Buildings in Egypt. Procedia Environ. Sci. 34, 258–270 (2016). https://doi.org/10.1016/j.proenv.2016.04.024
Fryskowska, A., Stachelek, J.: A no-reference method of geometric content quality analysis of 3D models generated from laser scanning point clouds for HBIM. J. Cult. Heritage 34, 95–108 (2018). https://doi.org/10.1016/j.culher.2018.04.003
Monego, M., Menin, A., Fabris, M., Achilli, V.: 3D survey of Sarno Baths (Pompeii) by integrated geomatic methodologies. J. Cult. Heritage 40, 240–246 (2019). https://doi.org/10.1016/j.culher.2019.04.013
Islam, S., Bhat, G.: Environmentally-friendly thermal and acoustic insulation materials from recycled textiles. J. Environ. Manage. 251 (2019). https://doi.org/10.1016/j.jenvman.2019.109536
https://onpe.org/news/precarite_energetique_combien_de_personnes_peinent_chauffer_leur_logement
https://ec.europa.eu/environment/integration/research/newsalert/pdf/26si_en.pdf
Sierra-érez, J., et al.: Environmental implications of cork as thermal insulation in façade retrofits. 10th Conference on Advanced Building Skins, 126 (2015)
Millogo, Y., Morel, J.-C., Aubert, J-E., Ghavami, K.: Experimental analysis of pressed adobe blocks reinforced with Hibiscus cannabinus fibers. Constr. Build. Mater. 52, 71–78 (2014)
Tonoli, G.H.D., Santos, S.F., Savastano, H., Delvasto, S., Mejiade Gutierrez, R., Lopez de Murphy, M.-del-M.: Effects of natural weathering on microstructure and mineral composition of cementitious roofing tiles reinforced with fique fibre. Cement Concr. Compos. 33, 225-232 (2011)
Alix, S., Philippe, E., Bessadok, A., Lebrun, L., Morvan, C., Marais, S.: Effect of chemical treatments on water sorption and mechanical properties of flax fibres. Bioresour. Technol. 100, 4742–4749 (2009)
Palumbo, M., Avellaneda, J., Lacasta, A.M.: Availability of crop by-products in Spain: new raw materials for natural thermal insulation. Resour. Conserv. Recycl. 99, 1–6 (2015)
Recherche, F., Bewa, H., Angers, A.: Evaluation de la disponibilité et de l ’ accessibilité de fibres végétales à usages matériaux en France Assessment of natural fibres availability and accessibility for material uses in France Remerciements. Recherche (2011)
Yates, T.: The use of non-food crops in the UK construction industry. J. Sci. Food. Agr. 86, 1790–6 (2006)
Asdrubali, F., D’Alessandro, F., Schiavoni, S.: A review of unconventional sustainable building insulation materials. Sustain. Mater. Technol. 4, 1–17 (2015)
Sharma, V., Marwaha, B.M., Vinayak, H.K.: Enhancing durability of adobe by natural reinforcement for propagating sustainable mud housing. Int. J. Sustain. Built Environ. 5(1), 141–155 (2016)
Dieye, Y., Sambou, V., Faye, M., Thiam, A., Adj, M., Azilinon, D.: Thermo-mechanical characterization of a building material based on Typha Australis. J. Build. Eng. 9, 142–146 (2017)
Calatan, G., Hegyi, A., Dico, C., Mircea, C.: Determining the optimum addition of vegetable materials in adobe bricks. Procedia Technol. 22, 259–265 (2016)
Ali, M., Chouw, N.: Experimental investigations on coconut-fibre rope tensils strength and pullout from coconut fibre reinforced concrete. Constr. Build. Mater. 41, 681–690 (2013)
Ramli, M., Kwan, W.H., Abas, N.-F.: Strength and durability of coconut-fiber-reinforced concrete in aggressive environments. Constr. Build. Mater. 38, 554–566 (2013)
Guozhong, L., Yanzhen, Y., Jianquan, L., Changchun, L., Yingzi, W.: Research on adaptability between crop-stalk fibers and cement. Cem. Concr. Res. 34, 1081–1085 (2004)
Madhoushi, M., Nadalizadeh, H., Ansell, M.P.: Withdrawal strength of fasteners in rice straw fibre-thermoplastic composites under dry and wet conditions. Polym. Test. 28, 301–306 (2009)
Chen, X., Yu, J., Zhang, Z., Lu, C.: Study on structure and thermal stability properties of cellulose fibers from rice straw. Carbohydr. Polym. 85, 245–250 (2011)
Cerezo, V.: Propriétés mécaniques, thermiques et acoustiques d’un matériau à base de particules végétales: approche expérimentale et modélisation théorique. Ph.D. thesis of INSA-Lyon, p. 242 (2005)
Bevan, R., Woolley, T.: Hemp lime construction- A guide to building with hemp lime composites. Build. Res. Establ. 110 (2008)
Bruijn, P.B., Jeppsson, K.H., Saudin, K., Nilsson, C.: Mechanical properties of lime hemp concrete containing shives and fibres. Biosys. Eng. 103, 474–479 (2009)
Ashour, T., Wieland, H., Georg, H., Bockisch, F.J., Wu, W.: The influence of natural reinforcement fibers on insulation values of earth plaster for straw bale buildings. Mater. Des. 31, 4676–4685 (2010)
Ashour, T., Goerg, H., Wu, W.: An experimental investigation on equilibrium moisture content of earth plaster with natural reinforcement fibers for straw bale buildings. Appl. Therm. Eng. 31, 293–303 (2011)
Van de Lindt, J.W., Carraro, J.A.H., Heyliger, P.R., Choi, C.: Application and feasibility of coal fly ash and scrap tire fiber as wood wall insulation supplements in residential buildings. Resour. Conserv. Recycl. 52, 1235–1240 (2008)
Haapio, A., Viitaniemi, P.: Environmental effect of structural solutions and building materials to a building. Environ. Impact Assesment Rev. 28, 587–600 (2008)
Almalkawi, A.T., Soroushian, P., Shrestha, S.S.: Evaluation of the energy efficiency of an aerated slurry-infiltrated mesh building system with biomass-based insulation. Renew. Energy 133, 797–806 (2019)
Huang, H., Zhou, Y., Huang, R., Wu, H., Sun, Y., Huang, G., Xu, T.: Optimum insulation thicknesses and energy conservation of building thermal insulation materials in Chinese zone of humid subtropical climate 52 (2020). https://doi.org/10.1016/j.scs.2019.101840
Marouen, S., Naima, B., Dashnor, H.: In situ performance assessment of a bio-sourced insulation material from an inverse analysis of measurments on a demonstrator building. EBUILT 2016, 16–19 November, Iasi (Romania) (2016)
Wei, J., Meyer, C.: Degradation rate of natural fiber in cement composites exposed to various accelerated aging environment conditions. Corros. Sci. 88, 118–132 (2014)
Toledo Filho, R.D., Scrivener, K., England, G.L., Ghavami, K.: Durability of alkali-sensitive sisal and coconut fibers in cement mortar composites. Cement Concr. Composit. 22, 127–143 (2000)
Lideôw, S., Ôrn, T., Luciani, A., Rizzo, A.: Energy-efficiency measures for heritage buildings: a literature review. Sustain. Cities Soc. 45, 231–242 (2019)
Robert, W., Piotr, K.: On rehabilitation of building with historical. Energy Procedia 132, 927–932 (2017)
Rathorea, M., Ahmada, A., Paula, A., Seungmin Rhob, S.: Urban planning and building smart cities based on the Internet of Things using Big Data analytics. Comput. Netw. 101, 63–80 (2016)
Mathew, P.A., Dunn, L.N., Sohn, M.D., Mercado, A., Custudio, C., Walter, T.: Big-data for building energy performance: Lessons from assembling a very
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2021 The Editor(s) (if applicable) and The Author(s), under exclusive license to Springer Nature Switzerland AG
About this paper
Cite this paper
Hoxha, D., Belayachi, N., Brunetaud, X., Rémond, S. (2021). A Critical Review on Durability of Sustainable Materials and Structures. In: Rotaru, A. (eds) Critical Thinking in the Sustainable Rehabilitation and Risk Management of the Built Environment. CRIT-RE-BUILT 2019. Springer Series in Geomechanics and Geoengineering. Springer, Cham. https://doi.org/10.1007/978-3-030-61118-7_16
Download citation
DOI: https://doi.org/10.1007/978-3-030-61118-7_16
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-61117-0
Online ISBN: 978-3-030-61118-7
eBook Packages: EngineeringEngineering (R0)