Abstract
Sheet Lamination (SHL) was one of the earliest commercialized AM techniques, but it has had only limited success in the marketplace. In SHL, sheets of materials are cut, stacked, and bonded (not always in that order) to form an object, and the material not used in the part cannot be easily reused and is typically discarded. Sheet material, however, can be some of the cheapest available and quite easy to handle. Metal variants exist as do paper, polymer, and ceramic variants. This process has been shown to be useful for the construction of very large, bulky objects. Although industrial applications for SHL are limited at the present time, continued research and technology development ensure these techniques will continue to serve niche applications for years to come.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Wimpenny, D. I., Bryden, B., & Pashby, I. R. (2003). Rapid laminated tooling. Journal of Materials Processing Technology, 138(1–3), 214–218.
Solido. (2020). http://www.solido3d.com/
Ennex Corp. (2020). https://www.ennex.com/
Stratoconception. (2020). www.stratoconception.com
Yi, S., et al. (2004). Study of the key technologies of LOM for functional metal parts. Journal of Materials Processing Technology, 150(1–2), 175–181.
Himmer, T., Nakagawa, T., & Anzai, M. (1999). Lamination of metal sheets. Computers in Industry, 39(1), 27–33.
Himmer, T., et al. (2004). Metal laminated tooling–a quick and flexible tooling concept. In Proceedings of the solid freeform fabrication symposium. Austin, TX.
Obikawa, T. (1998). Rapid manufacturing system by sheet steel lamination. In Proceeding of International Conference on Computer aided Production Engineering.
Yamasaki, H. (2000). Applying laminated die to manufacture automobile part in large size. Die Mould Technology, 15(7), 36–45.
Prinz, F. B., & Weiss, L. E. (1998). Novel applications and implementations of shape deposition manufacturing. Naval Research Reviews, 50, 19–26.
Ram, G. J., Yang, Y., & Stucker, B. (2006). Effect of process parameters on bond formation during ultrasonic consolidation of aluminum alloy 3003. Journal of Manufacturing Systems, 25(3), 221.
Blaha, F., & Langenecker, B. (1966). Plasticity test on metal crystals in an ultrasonic field. Acta Metallurgica, 7, 93–100.
Barber, J. R. (2002). Elasticity. Springer.
Adams, B. L., et al. (2008). Accessing the elastic–plastic properties closure by rotation and lamination. Acta Materialia, 56(1), 128–139.
Janaki Ram, G., et al. (2007). Use of ultrasonic consolidation for fabrication of multi-material structures. Rapid Prototyping Journal, 13(4), 226–235.
Robinson, C., et al. (2006). Maximum height to width ratio of freestanding structures built using ultrasonic consolidation. In Seventeeth Solid Freeform Fabrication Proceedings.
Flood, G. (1997). Ultrasonic energy welds copper to aluminium. Welding Journal, 76(1), 43–47.
Gunduz, I. E., et al. (2005). Enhanced diffusion and phase transformations during ultrasonic welding of zinc and aluminum. Scripta Materialia, 52(9), 939–943.
Joshi, K. C. (1971). The formation of ultrasonic bonds between metals. Welding Journal, 50(12), 840–848.
Weare, N. (1960). Fundamental studies of ultrasonic welding. Welding Journal, 37(84), 331s–341s.
Friel, R. J. (2015). 13 - Power ultrasonics for additive manufacturing and consolidating of materials. In J. A. Gallego-Juárez & K. F. Graff (Eds.), Power Ultrasonics (pp. 313–335). Oxford: Woodhead Publishing.
Yang, Y., Janaki Ram, G., & Stucker, B. E. (2010). An analytical energy model for metal foil deposition in ultrasonic consolidation. Rapid Prototyping Journal, 16(1), 20–28.
Langenecker, B. (1966). Effects of ultrasound on deformation characteristics of metals. IEEE Transactions on Sonics and Ultrasonics, 13(1), 1–8.
Robinson, C., et al. (2007). Fabrication of a Mini-SAR Antenna Array using Ultrasonic Consolidation and Direct-Write. Albuquerque: Sandia National Lab.(SNL-NM).
Sheet Lamination. (2020). http://canadamakes.ca/what-is-sheet-lamination/
Author information
Authors and Affiliations
Rights and permissions
Copyright information
© 2021 Springer Nature Switzerland AG
About this chapter
Cite this chapter
Gibson, I., Rosen, D., Stucker, B., Khorasani, M. (2021). Sheet Lamination. In: Additive Manufacturing Technologies. Springer, Cham. https://doi.org/10.1007/978-3-030-56127-7_9
Download citation
DOI: https://doi.org/10.1007/978-3-030-56127-7_9
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-56126-0
Online ISBN: 978-3-030-56127-7
eBook Packages: EngineeringEngineering (R0)