Abstract
In some cases, when designing modern transmissions, it is not possible to obtain a rational layout of the drive, to increase its load capacity when using traditional gears (cylindrical, bevel, etc.). The use of gears with involute bevel gears (IBG) allows solving this problem. It is possible to form gears for any arrangement of gears axles in space (crossing, intersecting, parallel axes) from IBG. At the same time, gears with IBG will have improved load and layout characteristics with respect to gears from ordinary cylindrical and bevel gears. However, the problem arises for obtaining solid-state models of involute bevel gears when assessing the stress-strain state of gear teeth with IBG. The paper presents a method for generating 3D models of involute bevel gears (IBG) by modeling machine gearing of an IBG and generating rack. The initial data for obtaining the involute bevel wheel model are: the number of teeth z, the module m, the angle δ, the angle of the tool β, the width of the wheel b, the wheel diameter at the greater end of Da, the distance from the larger end to the zero cross-section b0, the parameters of the rack (profile angle, height dimensions, radii of filets on the top and hollow of the tooth). In this case, the parameters of the generating rack can be set at the designer’s request. Models of a straight IBG, helical IBG, and an internal IBG are shown. Models of different involute bevel gearings are demonstrated as an example.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Bezrukov VI, Goncharov YuA, Zaynetdinov RI (1983) Planetary transmission. Copyright evidence USSR 10559223, Nov 1998
Lopatin BA, Kazartsev DN, Lopatin DB, Bezrukov VI, Rublev VM (1998) A non-gaping planetary gear. RF Patent 2101588, 10 Jan 1998
Lopatin BA, Tsukanov ON (2002) Theoretical aspects of the synthesis of helical-bevel gearing in general settings. Proc High Educ Establish Eng 2:37–43
Lopatin BA, Tsukanov ON, Plotnikova SV (2003) Cylindro-bevel toothed gears in car drives. Bull Mach Build 8:7–9
Tsukanov ON, Lopatin DB, Poluektov EA (2009) Electromechanical drive for mechanisms of the angular turn of objects of space technology. Bull Mach Build 2:14–16
Eremin VP, Eremin NV, Kirillin AN et al (2015) Creation of a new generation of electromechanical drives of trans-formed spacecraft systems. In: FSUE GNPRKC TsSKB-Progress, Samara
Plekhanov FI, Lopatin BA (2015) Planetary gear. RF Patent 2550598, 10 Apr 2015
Litvin FL (2004) A fuentes gear geometry and applied theory, 2nd edn. Cambridge University Press, Cambridge
Bolotovsky IA (1986) Handbook on geometric calculation of involute and worm gears, 2nd edn (updated and revised). Mashinostroyeniye, Moscow
Lopatin BA, Tsukanov ON (2005) Cylinder-conical gears. Monograph. SUSU, Chelyabinsk
Lopatin BA (1998) Development of theoretical bases of design, manufacture and testing of helical bevel gears with small interaxle corners. Dissertation, Kalashnikov ISTU
Bruzhas VV, Lopatin BA (2015) Development Of Solid-State Models For The Gears Of Different Geometry. In: International conference on industrial engineering, ICIE 2015, Procedia Engineering Series, pp 369–373. https://doi.org/10.1016/j.proeng.2015.12.125
Lopatin BA (2014) Involute-bevel gearings. In: Science SUSU, materials of the 66-th scientific conference, pp 1478–1483
Lopatin BA, Tsukanov ON (2012) Cylindro-bevel gearing. Int J Exp Edu 11:34–36
Tsukanov ON (2011) Ground rules of design of helical-bevel gearing in homogeneous coordinates. SUSU, Chelyabinsk
Lopatin BA, Plotnikova SV, Khaustov SA (2015) Involute helical-bevel gearing. In: International conference on industrial engineering, ICIE 2015. Procedia Engineering, Ser, pp 891–895. https://doi.org/10.1016/j.proeng.2015.12.123
Lopatin BA, Bruzhas VV (2015) Features of involute-bevel gearings on parallel axes. In: Materials of the 67th scientific conference. Ministry of Education and Science of the Russian Federation, South Ural State University, pp 1299–1305
Lopatin BA, Plotnikova SV (2017) Helical-bevel gearing with small wheel axles angles. In: International conference on industrial engineering, ICIE 2017. Procedia Engineering, Ser., pp 1189–1194. https://doi.org/10.1016/j.proeng.2017.10.616
Lopatin BA, Plotnikova SV (2015) Cylindrical gear formed by helical-bevel gearing. Sci Edu Mod Soc 8:120–121
Tsukanov ON, Lopatin BA, Bruzhas VV (2015) Planetary gear: patent for utility model RUS 159017 05/15/2015
Lopatin BA, Zainetdinov RI (2019) Cutting teeth of non-involute gears of the cylinder-conical internal transmission of internal gearing. Lect Notes Mech Eng 0:1201–1210. https://doi.org/10.1007/978-3-319-95630-5_125
Poluektov EA, Lopatin BA, Plotnikova SV (2020) Working Surface Calculation of Teeth Bevel Gear Helical-Bevel Gearing at Milling with Hob. In: 5th International conference on industrial engineering, ICIE 2019, Sochi, Russian Federation, pp 9–16. Lecture Notes in Mechanical Engineering. https://doi.org/10.1007/978-3-030-22063-1_2
Lopatin BA, Poluektov EA, Lopatin DB, Zaynetdinov RI, Rublev VM (2009) Method for cutting teeth of a non-involute gear of a cylindro-bevel transmission of internal gearing. RF Patent 2364480, 20 Aug 2009
Lopatin BA, Poluektov EA, Khaustov SA (2011) Formation of an internal approximate gearing of the cylindro-bevel gears. Bull SUSU Ser Mech Eng 11(228):62–69
Poluektov EA, Lopatin SD (2011) Modification of tooth profiles in cylindro-bevel gear internal engagement. Science SUSU Chelyabinsk Publ. center SUSU, pp 160–164
Plotnikova SV, Poluektov EA (2013) The method of teeth profiling of cylindro-bevel gears of internal engagement. Science SUSU Chelyabinsk Publ. Center SUSU, pp 329–332
Lopatin BA, Zainetdinov RI (2018) Forming of tooth profiles of non-involute bevel gear on CNC machines. Int Syst Prod 16(1):53–57
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2021 The Editor(s) (if applicable) and The Author(s), under exclusive license to Springer Nature Switzerland AG
About this paper
Cite this paper
Lopatin, B., Plotnikova, S., Bruzhas, V. (2021). Solid Modeling of Involute Bevel Gears. In: Radionov, A.A., Gasiyarov, V.R. (eds) Proceedings of the 6th International Conference on Industrial Engineering (ICIE 2020). ICIE 2021. Lecture Notes in Mechanical Engineering. Springer, Cham. https://doi.org/10.1007/978-3-030-54817-9_8
Download citation
DOI: https://doi.org/10.1007/978-3-030-54817-9_8
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-54816-2
Online ISBN: 978-3-030-54817-9
eBook Packages: EngineeringEngineering (R0)